Chemical Engineering Journal, Год журнала: 2025, Номер unknown, С. 162311 - 162311
Опубликована: Апрель 1, 2025
Язык: Английский
Chemical Engineering Journal, Год журнала: 2025, Номер unknown, С. 162311 - 162311
Опубликована: Апрель 1, 2025
Язык: Английский
Small, Год журнала: 2025, Номер unknown
Опубликована: Янв. 6, 2025
Abstract Flexible wearable sensors with bimodal functionality offer substantial value for human health monitoring, as relying on a single indicator is insufficient capturing comprehensive physiological information. However, face multiple challenges in practical applications, including mutual interference between various modalities, and integration of excellent mechanical properties, interfacial adhesion, environmental adaptability biocompatibility. Herein, the multifunctional hydrogel, synthesized through radical grafting supramolecular self‐crosslinking reactions, exhibits thermal sensitivity (TCR = −1.70% °C −1 ), high toughness (9.31 MJ m − 3 wide strain range (0–600%), outstanding adhesion strength (36.07 kPa), antifreeze, visualization, water retention, biocompatibility, antibacterial antioxidant capabilities. Leveraging its conductivity, this hydrogel can be applied electroluminescent, triboelectricity, electromyography message encryption. Moreover, fabricated smart temperature monitoring. To avoid two signals, system “IS”‐shaped configuration innovatively designed based finite element simulation results. The flexible circuit modules, data transmission form closed‐loop platform rehabilitation training patients arthritis or joint surgery. This strategy establishes decoupling self‐calibrating utilizing material to accurately detect parameters, advancing electronics personalized medicine.
Язык: Английский
Процитировано
2International Journal of Biological Macromolecules, Год журнала: 2025, Номер 306, С. 141597 - 141597
Опубликована: Фев. 28, 2025
Язык: Английский
Процитировано
2ACS Applied Materials & Interfaces, Год журнала: 2024, Номер 16(35), С. 46538 - 46547
Опубликована: Авг. 1, 2024
The development of wearable electronic devices for human health monitoring requires materials with high mechanical performance and sensitivity. In this study, we present a novel transparent tissue-like ionogel-based sensor based on silver nanowire-reinforced ionogel nanocomposites, P(AAm-co-AA) ionogel-Ag NWs composite. composite exhibits stretchability 605% strain moderate fracture stress about 377 kPa. also demonstrates sensitive response to temperature changes electrostatic adsorption. By encapsulating the nanocomposite in polyurethane film dressing, address issues such as skin irritation enable multidirectional stretching. Measuring resistive corresponding enables its utility highly stretchable excellent sensitivity, stability, repeatability. fabricated pressure array great proficiency distribution, capacitance sensing, discernment fluctuations both external electric fields stress. Our findings suggest that material holds promise applications flexible sensors, actuators.
Язык: Английский
Процитировано
9Energy & Environmental Science, Год журнала: 2024, Номер unknown
Опубликована: Янв. 1, 2024
The unique electron/ion dual regulation mechanism is established in the well-designed hydrogel electrolyte by integrating polyacrylamide network and carboxylated multi-walled carbon nanotubes for high performance flexible ZIBs.
Язык: Английский
Процитировано
8Advanced Functional Materials, Год журнала: 2025, Номер unknown
Опубликована: Янв. 29, 2025
Abstract Direct ink writing (DIW) is an additive manufacturing technique that has garnered notable interest due to its precise and consistent printing of a wide range materials, such as viscoelastic hydrogels, pastes, complex composites, by adjusting the ink's rheology. This material flexibility combined with ability print at room temperature makes DIW ideal for diverse applications scalable from small industrial levels. In recent years, conductive hydrogels gained significant attention across various fields, ranging biomedical scaffolds flexible electronics. Conductive are category which exhibit conductivity in their wet and/or dry state. Precursors like polymers, metallic nanoparticles, carbon‐based materials can be used induce electronic ionic hydrogels. review presents comprehensive overview demonstrating printability using technique. The fundamentals precursors presented. Following, different pathways reaching optimal hydrogel properties, including mechanical, conductive, rheological, focus on synthesis introduced. Finally, emerging electronics medicine highlighted, anticipated challenges advancement printable discussed.
Язык: Английский
Процитировано
1InfoMat, Год журнала: 2025, Номер unknown
Опубликована: Фев. 13, 2025
Abstract Hydrogel‐based sensors are recognized as key players in revolutionizing robotic applications, healthcare monitoring, and the development of artificial skins. However, primary challenge hindering commercial adoption hydrogel‐based is their lack high stability, which arises from water content within hydrogel structure, leading to freezing at subzero temperatures drying issues if protective layer compromised. These factors result a significant decline benefits offered by aqueous gel electrolytes, particularly terms mechanical properties conductivity, crucial for flexible wearable electronics. Previous reports have highlighted several disadvantages associated with using cryoprotectant co‐solvents lower ion‐doped anti‐freezing sensors. In this study, design optimization photocrosslinkable ionic utilizing silk methacrylate novel natural crosslinker presented. This innovative demonstrates significantly enhanced properties, including stretchability (>1825%), tensile strength (2.49 MPa), toughness (9.85 MJ m – 3 ), resilience (4% hysteresis), compared its non‐ion‐doped counterpart. Additionally, exhibits exceptional nonfreezing behavior down −85°C, anti‐drying functional stability up 2.5 years, signal drift only 5.35% over 2450 cycles, whereas control variant, resembling commonly reported hydrogels, 149.8%. The successful application developed advanced robotics, combined pioneering demonstration combinatorial commanding single sensor, could potentially revolutionize sensor design, elevating it next level benefiting various fields. image
Язык: Английский
Процитировано
1Advanced Functional Materials, Год журнала: 2025, Номер unknown
Опубликована: Фев. 19, 2025
Abstract Conductive hydrogels with high water content, excellent adhesion, and mechanical flexibility have garnered significant attention for flexible wearable electronic applications. Despite advancements, achieving robust electrical properties under extreme environmental conditions remains a key challenge. In this study, cost‐effective, lignin‐tannin nanosphere graphene‐doped hydrogel (LTGH) synthesized by dispersing graphene within the matrix via self‐assembled sodium lignosulfonate tannic acid nanospheres is presented. The LTGH exhibits exceptional conductivity (28 S m −1 ), ultra‐high sensitivity (maximum gauge factor ≈350), an ultra‐low detection limit (<0.5%). Additionally, it demonstrates outstanding stretchability (>1800%), strong adhesion (>50 kPa), UV resistance, antibacterial properties. By incorporating ethylene glycol, maintains reliable performance across wide temperature range (−80 to 50 °C). Furthermore, successfully integrated into convolutional neural network‐based sign language recognition system, compact lightweight design accuracy, rapid responsiveness, cost efficiency. This work highlights superior sensing capabilities of conductive hydrogels, underscoring their potential in all‐weather technologies.
Язык: Английский
Процитировано
1ACS Sensors, Год журнала: 2024, Номер 9(8), С. 4216 - 4226
Опубликована: Июль 28, 2024
Thermoelectric (TE) hydrogels, mimicking human skin, possessing temperature and strain sensing capabilities, are well-suited for human-machine interaction interfaces wearable devices. In this study, a TE hydrogel with high toughness responsiveness was created using the Hofmeister effect current effect, achieved through cross-linking of PVA/PAA/carboxymethyl cellulose triple networks. The facilitated by Na
Язык: Английский
Процитировано
6Chemical Engineering Journal, Год журнала: 2024, Номер 495, С. 153263 - 153263
Опубликована: Июнь 18, 2024
Язык: Английский
Процитировано
5Nano Energy, Год журнала: 2024, Номер unknown, С. 110261 - 110261
Опубликована: Сен. 1, 2024
Язык: Английский
Процитировано
4