From Nature to Engineering: Mortar Volume and Interfacial Mechanics in Bioinspired Ceramics DOI Creative Commons
Ehsan Azad, Hamidreza Yazdani Sarvestani, Behnam Ashrafi

и другие.

Advanced Engineering Materials, Год журнала: 2025, Номер unknown

Опубликована: Апрель 13, 2025

Natural armors such as nacre inspire the development of bioinspired ceramics due to their exceptional toughness and damage tolerance. This study examines influence mortar volume fraction on interfacial mechanics ceramic composites using single lap joint specimens with varying soft‐layer (mortar) volumes: low (LMV, 3%), medium (MMV, 6%), high (HMV, 9%). These fractions reflect natural nacre's content are precisely controlled during specimen fabrication. Experimental results demonstrate adhesive failure dominant mode, increased enhancing maximum elongation without altering ultimate shear strength. Finite element analysis ABAQUS a cohesive zone model reveal volume's significant effect sliding behavior strain energy release rate (SERR). Specifically, compared MMV, LMV exhibits 5% increase in stiffness 26% reduction SERR, while HMV shows 4% decrease 29% SERR. The delays crack initiation extends plastic deformation phase, thereby dissipation capabilities. findings inform tougher, damage‐resistant for engineering by optimizing ceramics.

Язык: Английский

Mechanical properties of Polymer-Infiltrated ZrO2 ceramic network improved by Incorporation of SiO2 Component DOI Creative Commons

Xinkai Cui,

Xiaoyu Zhang, Lin Hu

и другие.

Materials & Design, Год журнала: 2025, Номер unknown, С. 113739 - 113739

Опубликована: Фев. 1, 2025

Язык: Английский

Процитировано

1
Development of an Ultra-Strength and High-Barrier Biodegradable Polymer via One-Step Rheological Cold Rolling DOI
Senhao Zhang, Huanhuan Zhang, Mingjin Liu

и другие.

ACS Sustainable Chemistry & Engineering, Год журнала: 2025, Номер unknown

Опубликована: Фев. 25, 2025

Язык: Английский

Процитировано

0
From Nature to Engineering: Mortar Volume and Interfacial Mechanics in Bioinspired Ceramics DOI Creative Commons
Ehsan Azad, Hamidreza Yazdani Sarvestani, Behnam Ashrafi

и другие.

Advanced Engineering Materials, Год журнала: 2025, Номер unknown

Опубликована: Апрель 13, 2025

Natural armors such as nacre inspire the development of bioinspired ceramics due to their exceptional toughness and damage tolerance. This study examines influence mortar volume fraction on interfacial mechanics ceramic composites using single lap joint specimens with varying soft‐layer (mortar) volumes: low (LMV, 3%), medium (MMV, 6%), high (HMV, 9%). These fractions reflect natural nacre's content are precisely controlled during specimen fabrication. Experimental results demonstrate adhesive failure dominant mode, increased enhancing maximum elongation without altering ultimate shear strength. Finite element analysis ABAQUS a cohesive zone model reveal volume's significant effect sliding behavior strain energy release rate (SERR). Specifically, compared MMV, LMV exhibits 5% increase in stiffness 26% reduction SERR, while HMV shows 4% decrease 29% SERR. The delays crack initiation extends plastic deformation phase, thereby dissipation capabilities. findings inform tougher, damage‐resistant for engineering by optimizing ceramics.

Язык: Английский

Процитировано

0