Fast-charging anodes for lithium ion batteries: progress and challenges DOI

Xiaobo Ding,

Qingfeng Zhou,

Xiaodan Li

и другие.

Chemical Communications, Год журнала: 2024, Номер 60(18), С. 2472 - 2488

Опубликована: Янв. 1, 2024

This article summarizes the basic principles, current research progress, advanced strategies and challenges of fast-charging anodes.

Язык: Английский

Fast Charging Anode Materials for Lithium‐Ion Batteries: Current Status and Perspectives DOI
Shengqiang Li, Kai Wang, Gefei Zhang

и другие.

Advanced Functional Materials, Год журнала: 2022, Номер 32(23)

Опубликована: Март 25, 2022

Abstract With the enormous development of electric vehicle market, fast charging battery technology is highly required. However, slow kinetics and lithium plating under condition traditional graphite anode hinder capability lithium‐ion batteries. To develop materials with rapid Li‐ions diffusion reaction has received widely attentions. This review summarizes current status in exploration materials, mainly including critical challenge achieving capability, inherent structures storage mechanisms various as well recent progress to improve rate performance involving morphology regulation, structure design, surface/interface modification, forming multiphase systems. Finally, challenges future directions developing Li‐ion batteries are highlighted.

Язык: Английский

Процитировано

425

Reconfiguring Hard Carbons with Emerging Sodium‐Ion Batteries: A Perspective DOI

Yue Chu,

Jun Zhang, Yibo Zhang

и другие.

Advanced Materials, Год журнала: 2023, Номер 35(31)

Опубликована: Фев. 21, 2023

Abstract Hard carbons, an important category of amorphous are non‐graphitizable and widely accepted as the most promising anode materials for emerging sodium‐ion batteries (SIBs), because their changeable low‐potential charge/discharge plateaus. However, microstructures not fixed difficult to accurately demonstrate graphites do. The successful use hard carbons in SIBs revives interest clearly picture complicated that close relevance sodium storage. In this review, past definitions structural models revisited first, a renewed understanding storage is presented. Three critical features highlighted namely crystallites, defects, nanopores, which directly responsible presence plateaus reversible extension. impact these upon then deeply discussed sieving finally proposed ideal configuration carbon superhigh This review expected offer clear help realize truly rational design high‐capacity anodes, driving industrialization SIBs, more promisingly open up window exploring possible new uses.

Язык: Английский

Процитировано

286

Understanding of Sodium Storage Mechanism in Hard Carbons: Ongoing Development under Debate DOI
Ning Sun, Jieshan Qiu, Bin Xu

и другие.

Advanced Energy Materials, Год журнала: 2022, Номер 12(27)

Опубликована: Июнь 7, 2022

Abstract Hard carbons are promising anode candidates for sodium‐ion batteries due to their excellent Na‐storage performance, abundant resources, and low cost. Despite the recent advances in hard carbons, interpretation of mechanism remains unclear, with discrepancies over a general model describing corresponding structure–property relationship. For rational structural design high‐performance carbon anodes, thorough understanding charge storage relationship between microstructure performance is critical. This review provides comprehensive overview known models describe discussion focused on active sites such as interlayer space, pores, heteroatoms, defects. The present models, including “insertion‐filling”, “adsorption‐filling”, “adsorption‐insertion”, “multistage mechanism” associated analytical characterization, elaborately discussed view challenges prospects unveiling carbons. serves clarify guidance toward anodes batteries.

Язык: Английский

Процитировано

245

Nanosheet-assembled porous MnCo2O4.5 microflowers as electrode material for hybrid supercapacitors and lithium-ion batteries DOI
Yafei Liu,

Xuming Du,

Yi Li

и другие.

Journal of Colloid and Interface Science, Год журнала: 2022, Номер 627, С. 815 - 826

Опубликована: Июль 21, 2022

Язык: Английский

Процитировано

213

Biomass‐Derived Carbon for High‐Performance Batteries: From Structure to Properties DOI
Yu Sun, Xiao‐Lei Shi, Yanling Yang

и другие.

Advanced Functional Materials, Год журнала: 2022, Номер 32(24)

Опубликована: Апрель 8, 2022

Abstract Owing to the sustainability, environmental friendliness, and structural diversity of biomass‐derived materials, extensive efforts have been devoted use them as energy storage materials in high‐energy rechargeable batteries. A timely comprehensive review from structures mechanisms will significantly widen this research field. Here, it starts with operation mechanism batteries, aims summarize latest advances for carbon achieve battery including activation methods classification zero dimension, one two three dimension. Each strategy carefully selected examples then moves illustrate underlying transport electrons structure. In end, challenges, strategies, outlooks are pointed out future development materials. Overall, help researchers choose appropriate strategies design thereby promoting application biomass design.

Язык: Английский

Процитировано

188

Hard-carbon-stabilized Li–Si anodes for high-performance all-solid-state Li-ion batteries DOI
Wenlin Yan, Zhenliang Mu, Zhixuan Wang

и другие.

Nature Energy, Год журнала: 2023, Номер 8(8), С. 800 - 813

Опубликована: Июнь 15, 2023

Язык: Английский

Процитировано

180

Toward Direct Regeneration of Spent Lithium-Ion Batteries: A Next-Generation Recycling Method DOI
Junxiong Wang, Jun Ma, Zhaofeng Zhuang

и другие.

Chemical Reviews, Год журнала: 2024, Номер 124(5), С. 2839 - 2887

Опубликована: Март 1, 2024

The popularity of portable electronic devices and electric vehicles has led to the drastically increasing consumption lithium-ion batteries recently, raising concerns about disposal recycling spent batteries. However, rate worldwide at present is extremely low. Many factors limit promotion battery rate: outdated technology most critical one. Existing metallurgy-based methods rely on continuous decomposition extraction steps with high-temperature roasting/acid leaching processes many chemical reagents. These are tedious worse economic feasibility, products mostly alloys or salts, which can only be used as precursors. To simplify process improve benefits, novel in urgent demand, direct recycling/regeneration therefore proposed a next-generation method. Herein, comprehensive review origin, current status, prospect provided. We have systematically analyzed summarized their limitations, pointing out necessity developing methods. A detailed analysis for discussions advantages, obstacles conducted. Guidance future toward large-scale industrialization well green efficient systems also

Язык: Английский

Процитировано

144

Boosting sodium storage performance of hard carbons by regulating oxygen functionalities of the cross-linked asphalt precursor DOI Creative Commons
Ran Xu, Zonglin Yi, Mingxin Song

и другие.

Carbon, Год журнала: 2023, Номер 206, С. 94 - 104

Опубликована: Фев. 9, 2023

Язык: Английский

Процитировано

143

Synergistic Engineering of Heterointerface and Architecture in New‐Type ZnS/Sn Heterostructures In Situ Encapsulated in Nitrogen‐Doped Carbon Toward High‐Efficient Lithium‐Ion Storage DOI

Chengzhi Ke,

Ruiwen Shao,

Yinggan Zhang

и другие.

Advanced Functional Materials, Год журнала: 2022, Номер 32(38)

Опубликована: Июль 8, 2022

Abstract Engineering heterogeneous composite electrodes consisting of multiple active components for meeting various electrochemical and structural demands have proven indispensable significantly boosting the performance lithium‐ion batteries (LIBs). Here, a novel design ZnS/Sn heterostructures with rich phase boundaries concurrently encapsulated into hierarchical interconnected porous nitrogen‐doped carbon frameworks (ZnS/Sn@NPC) working as superior anode LIBs, is showcased. These ZnS/Sn@NPC abundant heterointerfaces, unique architecture, well highly conductive N‐doped C matrix can provide plentiful Li + ‐storage sites, facilitate charge transfer, reinforce stability. Accordingly, as‐fabricated LIBs has achieved high reversible capacity (769 mAh g −1 , 150 cycles at 0.1 A ), high‐rate capability long cycling stability (600 cycles, 645.3 1 92.3% retention). By integrating in situ/ex situ microscopic spectroscopic characterizations theoretical simulations, multiscale in‐depth fundamental understanding underlying reaction mechanisms origins enhanced explicitly elucidated. Furthermore, full cell assembled prelithiated LiFePO 4 cathode displays rate performance. This work highlights significance chemical heterointerface engineering rationally designing high‐performance LIBs.

Язык: Английский

Процитировано

131

“Fast-Charging” Anode Materials for Lithium-Ion Batteries from Perspective of Ion Diffusion in Crystal Structure DOI
Rui Wang, Lu Wang, Rui Liu

и другие.

ACS Nano, Год журнала: 2024, Номер 18(4), С. 2611 - 2648

Опубликована: Янв. 15, 2024

"Fast-charging" lithium-ion batteries have gained a multitude of attention in recent years since they could be applied to energy storage areas like electric vehicles, grids, and subsea operations. Unfortunately, the excellent density fail sustain optimally while are exposed fast-charging conditions. In actuality, crystal structure electrode materials represents critical factor for influencing performance. Accordingly, employing anode with low diffusion barrier improve "fast-charging" performance battery. this Review, first, principle battery ion path briefly outlined. Next, application prospects various structures evaluated search stable, safe, long lifespan, solving remaining challenges associated high power safety. Finally, summarizing research advances typical materials, including preparation methods advanced morphologies latest techniques ameliorating Furthermore, an outlook is given on ongoing breakthroughs batteries. Intercalated (niobium-based, carbon-based, titanium-based, vanadium-based) favorable cycling stability predominantly limited by undesired electronic conductivity theoretical specific capacity. addressing electrical these constitutes effective trend realizing fast-charging. The conversion-type transition metal oxide phosphorus-based capacity typically undergoes significant volume variation during charging discharging. Consequently, alleviating expansion significantly fulfill

Язык: Английский

Процитировано

124