Polylactic acid blends: an insight to their microbial production, biodegradation and applications DOI
Mukesh Kumar Patidar,

Kanushri Ranawat,

Fatema Matkawala

и другие.

Environmental Sustainability, Год журнала: 2024, Номер unknown

Опубликована: Дек. 17, 2024

Язык: Английский

Development and Characterization of Novel Polylactic Acid/Calcium Fluoride Biocomposite Films: Effects on Structural, Mechanical, Thermal, and Optical Properties DOI Open Access

Murat Eroğlu

ChemistrySelect, Год журнала: 2025, Номер 10(10)

Опубликована: Март 1, 2025

Abstract Novel biocomposite films produced from polylactic acid (PLA)/calcium fluoride (CaF 2 ) have been developed and characterized in this study through solvent casting methods. The PLA matrix was incorporated with CaF powder at different concentrations (0.5–30 wt%), which can keep the biodegradability but improved material properties. structural, mechanical, thermal, optical effects of varying content were discussed using XRD, FTIR, SEM, TGA, DSC, mechanical tests. About 30 wt% increases tensile strength P30 sample (30 shown to be significantly improved, 9.3% 30.6% by supplement. SEM analysis showed that due excessive loading, points stress concentration hence surface cracks appeared indicating loading limit. Thermal proved improve stability higher amounts (>5 TGA results reduced mass loss ash content. However, increasing content, properties compromised, resulting more opaque yellowish films. All that, however, appears a very good reinforcing agent for PLA, optimum must weighed It is evidence toward improvement enhanced PLA‐based biocomposites numerous applications, maintaining environmental sustainability.

Язык: Английский

Процитировано

0

Polylactic acid blends: an insight to their microbial production, biodegradation and applications DOI
Mukesh Kumar Patidar,

Kanushri Ranawat,

Fatema Matkawala

и другие.

Environmental Sustainability, Год журнала: 2024, Номер unknown

Опубликована: Дек. 17, 2024

Язык: Английский

Процитировано

0