Optimizing Geopolymer Concrete Mixtures Containing Alccofine Using the Taguchi Experimental Design Method DOI
Srishtee Chaudhary, S. K. Dubey, Abhay Sharma

и другие.

Journal of Inorganic and Organometallic Polymers and Materials, Год журнала: 2025, Номер unknown

Опубликована: Май 17, 2025

Язык: Английский

Enhanced Removal of Rhodamine B Dye by Adsorption and Photodegradation Processes Using Bentonite-Semiconductor-Based Nanocomposites: Synthesis, Characterization, Kinetic Study, and Cost Analysis DOI
Aicha Iqajtaoune, Hamid Saufi, Badr Aouan

и другие.

Chemistry Africa, Год журнала: 2025, Номер unknown

Опубликована: Март 9, 2025

Язык: Английский

Процитировано

2

Development of moringa seed powder-modified slag geopolymers for enhanced mechanical properties and effective dye removal DOI Creative Commons

soher hashish,

Essam Kishar,

Doaa Ahmed

и другие.

Scientific Reports, Год журнала: 2025, Номер 15(1)

Опубликована: Март 15, 2025

Abstract Crystal violet (CV), a widely used dye in paints and textiles, poses significant environmental threat due to its non-biodegradable nature. A modified slag-based geopolymer has been developed address this issue by incorporating raw moringa seed powder (MSP), an agricultural waste. The geopolymers (SM1, SM2, SM3) were created adding different percentages of MSP (0.2%, 0.6%, 1% weight) ground granulated blast furnace slag (GGBFS), using sodium silicate 10 M hydroxide as alkali activators. This combination enhances the geopolymer’s mechanical adsorbent properties, making it more effective for CV removal. composites analyzed X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM). Their properties evaluated conducting compressive strength total porosity tests. Pore structure analysis was performed nitrogen adsorption desorption techniques, point zero charges determined. Additionally, batch experiments carried out investigate dye, employing two isotherm models kinetic analysis. SM1 mix, which is containing 0.2% MSP, exhibited highest at 73 MPa after 180 days, representing 25.8% improvement compared control mix (100% slag). Furthermore, mixes showed greater activity toward crystal with SM3 achieving capacity up 322.58 mg/g. study demonstrates that capacity. indicates positive impact on composite’s surface highlights benefits utilizing industrial waste wastewater treatment.

Язык: Английский

Процитировано

1

The Application of Nanoparticle-doped Geopolymers as Innovative Photocatalysts for Degrading Organic Pollutants in Aquatic Environments: A Comprehensive Review DOI
Badr Aouan,

Marouane El Alouani,

Rajaa Bassam

и другие.

Journal of Molecular Structure, Год журнала: 2025, Номер unknown, С. 142303 - 142303

Опубликована: Апрель 1, 2025

Язык: Английский

Процитировано

0

Optimization of synthesis of a geopolymer based on laterite/beer bottles composites for adsorption of methylene blue in aqueous solution DOI Creative Commons

Ludovic Kemdjien,

Armand Tchakounte,

Idriss Lenou

и другие.

Desalination and Water Treatment, Год журнала: 2025, Номер unknown, С. 101189 - 101189

Опубликована: Апрель 1, 2025

Язык: Английский

Процитировано

0

Optimizing Geopolymer Concrete Mixtures Containing Alccofine Using the Taguchi Experimental Design Method DOI
Srishtee Chaudhary, S. K. Dubey, Abhay Sharma

и другие.

Journal of Inorganic and Organometallic Polymers and Materials, Год журнала: 2025, Номер unknown

Опубликована: Май 17, 2025

Язык: Английский

Процитировано

0