Dynamic analysis of air-based photovoltaic–thermal system with fins and rectangular obstacles DOI
Kwang-Hwan Choi

Applied Thermal Engineering, Год журнала: 2025, Номер unknown, С. 126412 - 126412

Опубликована: Апрель 1, 2025

Язык: Английский

Experimental optimization of conical solar distillers using graphite pin fins as sensible heat storage materials: Energy, exergy, and exergo-economic approach DOI
K. Harby, Mohammed El Hadi Attia, Mohamed Abdelgaied

и другие.

Process Safety and Environmental Protection, Год журнала: 2024, Номер 187, С. 762 - 775

Опубликована: Май 9, 2024

Язык: Английский

Процитировано

35

Innovative and efficient integrations of desalination plants coupled absorption, adsorption, and humidification-dehumidification desalination units employing external heat recovery techniques DOI
K. Harby, Ahmed S. Alsaman, Ehab S. Ali

и другие.

Energy Conversion and Management, Год журнала: 2024, Номер 314, С. 118667 - 118667

Опубликована: Июнь 19, 2024

Язык: Английский

Процитировано

23

Optimization and experimental study on the effect of graphite bars on the productivity of conical solar distiller: Exergo-economic approach DOI Creative Commons
Mohammed El Hadi Attia, K. Harby, Mohamed Abdelgaied

и другие.

Desalination and Water Treatment, Год журнала: 2024, Номер 320, С. 100611 - 100611

Опубликована: Июль 15, 2024

This work aims to enhance productivity and reduce the production cost of conical solar distillers using green inexpensive materials. Conical stills are characterized by their cover is always exposed same radiation in all locations do not create shading. Different graphite bars installed at various distances still basin, acting as corrugated surfaces energy storage materials increase interface area, losses, overall performance. Three were designed tested investigate effect changing (0 30 mm) between rods on rate climatic conditions El Oued, Algeria. Furthermore, energy, exergy, economic, exergoeconomic approaches conducted assess viability proposed distillers. Results showed that reducing increases due increased interfacial space with basin water excess heat absorbed during day. The exergy efficiencies incorporated improved 46.23–90.46 % 181–321 respectively, compared traditional still. Based exergo-economic approach, annual outlets 45.65–90.46 187.5–439 yield payback period decreased 40.41–74.91 28.8–42.8 Finally, represent a good option for obtaining high performance economic benefit.

Язык: Английский

Процитировано

23

Performance enhancement of solar distillers integrated with new green composite thermal insulations: Experimental and economic approach DOI Creative Commons
Mohammed El Hadi Attia, K. Harby, Mohamed Abdelgaied

и другие.

Desalination and Water Treatment, Год журнала: 2024, Номер 320, С. 100644 - 100644

Опубликована: Июль 27, 2024

This work aims to improve water productivity in solar stills by reducing heat loss through green composite insulators ensure storage of the absorbed thermal energy. Two materials were proposed and presented. The first is made date palm fiber mortar (PFM), second gypsum (PFG). Three identical distillers designed tested under same meteorological conditions El Oued, Algeria. reference case (RSW distiller) where a 5 cm thick wooden box used as insulation. (MSD-PFM insulated with 2.5 PFM material then installed inside box. third (MSD-PFG PFG conductivity was determined experimentally insulators. Results showed that accumulated production from MSD-PFG (4100 mlm-2day-1) higher than MSD-PFM (3400 RSW (2800 21.5 % 46.43 %, respectively. improvement efficiency 45.77 21.14 economic analysis cost (0.011 $/liter) (0.0153 31.68 4.97 sustainability, eco-friendliness, cost-effectiveness make it an attractive option for insulation applications distillers.

Язык: Английский

Процитировано

19

Performance optimization and 4E evaluation of a conical solar still using welded steel mesh as a secondary porous absorber: Impact of varying hole sizes DOI
Mohammed El Hadi Attia, K. Harby, Badr H. Bedairi

и другие.

Solar Energy Materials and Solar Cells, Год журнала: 2025, Номер 283, С. 113463 - 113463

Опубликована: Янв. 31, 2025

Язык: Английский

Процитировано

5

A numerical approach to enhance the performance of double-pass solar collectors with finned photovoltaic/thermal integration DOI
Mohammed El Hadi Attia, Moataz M. Abdel‐Aziz, Abdelkrim Khelifa

и другие.

Applied Thermal Engineering, Год журнала: 2025, Номер unknown, С. 125974 - 125974

Опубликована: Фев. 1, 2025

Язык: Английский

Процитировано

4

Improving the performance of hemispherical solar stills using four axial magnetic cylindrical magnets: Innovative configurations for optimizing magnetic field distribution DOI
Mohammed El Hadi Attia, K. Harby, Badr H. Bedairi

и другие.

Applied Thermal Engineering, Год журнала: 2025, Номер unknown, С. 125773 - 125773

Опубликована: Янв. 1, 2025

Язык: Английский

Процитировано

3

Improving the performance of hemispherical solar stills using innovative copper tubes arranged in a honeycomb structure with natural sponges coated with nanoparticles DOI
Mohammed El Hadi Attia, K. Harby, Majdi T. Amin

и другие.

Applied Thermal Engineering, Год журнала: 2025, Номер unknown, С. 126130 - 126130

Опубликована: Март 1, 2025

Язык: Английский

Процитировано

3

Comparative analysis and optimization of different sets of axially magnetized cylindrical magnets to enhance freshwater productivity in hemispherical solar stills, emphasizing 4E performance DOI
Mohammed El Hadi Attia, K. Harby, Badr H. Bedairi

и другие.

Solar Energy Materials and Solar Cells, Год журнала: 2024, Номер 282, С. 113364 - 113364

Опубликована: Дек. 10, 2024

Язык: Английский

Процитировано

13

An experimental study on increasing the productivity of novel conical solar distillers with flat and egg steel trays basins: Energy, exergy, and exergo-economic evaluation DOI
Mohammed El Hadi Attia, K. Harby, Badr H. Bedairi

и другие.

Solar Energy, Год журнала: 2025, Номер 287, С. 113258 - 113258

Опубликована: Янв. 9, 2025

Язык: Английский

Процитировано

2