Sintering behavior and mechanical properties of calcium titanate doped yttrium oxide refractory via binder jetting additive manufacturing DOI

Xing Qin,

Wei Zhao,

Kaifei Zou

и другие.

Ceramics International, Год журнала: 2025, Номер unknown

Опубликована: Май 1, 2025

Язык: Английский

Machine learning-driven 3D printing: A review DOI
Xijun Zhang,

Dianming Chu,

Xinyue Zhao

и другие.

Applied Materials Today, Год журнала: 2024, Номер 39, С. 102306 - 102306

Опубликована: Июнь 29, 2024

Язык: Английский

Процитировано

22
Novel low-shrinkage and soluble heavy calcium carbonate matrix ceramic cores prepared by binder jetting DOI

Xiaopeng Yu,

Yanqing Niu, Wenming Jiang

и другие.

Ceramics International, Год журнала: 2025, Номер unknown

Опубликована: Янв. 1, 2025

Язык: Английский

Процитировано

1
Effects of Compaction Thickness on Density, Integrity, and Microstructure of Green Parts in Binder Jetting Additive Manufacturing of Silicon Carbide DOI Creative Commons

Mostafa Meraj Pasha,

Md Shakil Arman,

Zhijian Pei

и другие.

Journal of Manufacturing and Materials Processing, Год журнала: 2025, Номер 9(4), С. 136 - 136

Опубликована: Апрель 19, 2025

Binder jetting additive manufacturing (BJAM) of silicon carbide (SiC) has been reported in the literature. In studies, effects compaction thickness on properties SiC green parts printed by BJAM have largely unexamined. This study aims to fill this gap literature investigating density, integrity, and microstructure BJAM. study, experiments were conducted using four levels at two layer thickness. The results indicate that increasing enhances part reaching 1.85 g/cm3 a 45 µm 1.87 60 µm, respectively. However, higher might also introduce defects parts, such as cracks. Scanning electron microscopy (SEM) analysis confirmed improved particle packing reduced porosity with increased These findings underscore trade-off between density defect formation, providing critical insights for optimizing process variables fabricating parts.

Язык: Английский

Процитировано

1
Theoretical Analysis of Self-Shrinkage Spheroidization of Irregular Degradable Polymer Powder under Thermodynamic Nonequilibrium State DOI Creative Commons

Xiong Shuai,

Liuyimei Yang,

Fangwei Qi

и другие.

Deleted Journal, Год журнала: 2024, Номер unknown, С. 200173 - 200173

Опубликована: Окт. 1, 2024

Язык: Английский

Процитировано

3
Effect of shell printing and directional infiltration in binder jetting and reaction sintering of silicon carbide DOI Creative Commons
Michael Isakhani-Zakaria, Erkki Levänen, Setareh Zakeri

и другие.

Ceramics International, Год журнала: 2025, Номер unknown

Опубликована: Янв. 1, 2025

Язык: Английский

Процитировано

0
Concentrated Solar Interface Evaporation by Ceramic Composite SiC/SiO2@C with Janus Structure DOI
Jiajun An, Ming Zhai,

Yan-Ru Yang

и другие.

Ceramics International, Год журнала: 2025, Номер unknown

Опубликована: Апрель 1, 2025

Язык: Английский

Процитировано

0
Binder jetting 3D printing preparation of SiC ceramics with low free silicon content and densification by PIP and LSI process DOI Creative Commons

Zikang Song,

Wen Yang, Yongzhao Hou

и другие.

Journal of Materials Research and Technology, Год журнала: 2025, Номер 36, С. 5899 - 5910

Опубликована: Апрель 25, 2025

Язык: Английский

Процитировано

0
3D printed polymeric membranes for oil/water separation: a comprehensive review DOI
Rund Abu‐Zurayk, Rashmi Walvekar, Hui Leng Choo

и другие.

Progress in Additive Manufacturing, Год журнала: 2025, Номер unknown

Опубликована: Май 11, 2025

Язык: Английский

Процитировано

0
Sintering behavior and mechanical properties of calcium titanate doped yttrium oxide refractory via binder jetting additive manufacturing DOI

Xing Qin,

Wei Zhao,

Kaifei Zou

и другие.

Ceramics International, Год журнала: 2025, Номер unknown

Опубликована: Май 1, 2025

Язык: Английский

Процитировано

0