Chemical Engineering Journal, Год журнала: 2024, Номер unknown, С. 158175 - 158175
Опубликована: Ноя. 1, 2024
Язык: Английский
Chemical Engineering Journal, Год журнала: 2024, Номер unknown, С. 158175 - 158175
Опубликована: Ноя. 1, 2024
Язык: Английский
Journal of Power Sources, Год журнала: 2024, Номер 613, С. 234809 - 234809
Опубликована: Июнь 8, 2024
Язык: Английский
Процитировано
7Energy & Fuels, Год журнала: 2024, Номер 38(12), С. 11253 - 11261
Опубликована: Июнь 7, 2024
Solid composite electrolytes, leveraging the advantages of both ceramics and polymers, are emerging as a viable alternative to liquid electrolytes in all-solid-state lithium metal batteries. Here, we have developed polymer–ceramic electrolyte with an area-specific resistance ∼94 Ω cm2 at room temperature (RT) by solution casting method. A Li-ion conducting LiTa2PO8 ceramic RT bulk conductivity ∼3.2 × 10–4 S cm–1 was synthesized act active filler PEO/PVDF-HFP polymer matrix complexed LiTFSI salt obtain electrolyte. The symmetric cell optimized exhibited excellent cyclability over 950 cycles areal current density 0.2 mA cm–2. full LiFePO4 cathode anode delivered specific capacity ∼115 mAh g–1 ∼85% retention after 500 1C RT, making it be adopted batteries for applications.
Язык: Английский
Процитировано
6Chemical Engineering Journal, Год журнала: 2024, Номер 500, С. 157572 - 157572
Опубликована: Ноя. 1, 2024
Язык: Английский
Процитировано
5Advanced Materials, Год журнала: 2024, Номер unknown
Опубликована: Дек. 25, 2024
Abstract The ability to rapidly charge batteries is crucial for widespread electrification across a number of key sectors, including transportation, grid storage, and portable electronics. Nevertheless, conventional Li‐ion with organic liquid electrolytes face significant technical challenges in achieving rapid charging rates without sacrificing electrochemical efficiency safety. Solid‐state (SSBs) offer intrinsic stability safety over their counterparts, which can potentially bring exciting opportunities fast applications. Yet realizing fast‐charging SSBs remains challenging due several fundamental obstacles, slow Li + transport within solid electrolytes, sluggish kinetics the electrodes, poor electrode/electrolyte interfacial contact, as well growth dendrites. This article examines SSB through comprehensive review materials strategies (ceramics, polymers, composites), composites. In particular, methods enhance ion crystal structure engineering, compositional control, microstructure optimization are analyzed. also addresses interface/interphase chemistry mechanisms, providing insights guide material design interface next‐generation SSBs.
Язык: Английский
Процитировано
4ACS Applied Materials & Interfaces, Год журнала: 2024, Номер unknown
Опубликована: Дек. 5, 2024
The growing demand for advanced solid-state lithium metal batteries has attracted considerable attention to the development of garnet-based membranes, known their high ionic conductivity and superior electrochemical stability. Among fabrication methods tape-casting method is recognized as a mature widely applied process, characterized by its simplicity, low cost, suitability large-scale production. In this review paper, we provide comprehensive summary topic, emphasizing intricate interplay among material properties, processing parameters, membrane performance. We discuss key challenges in creating dense porous garnet including controlling volatilization, optimizing pore size, maintaining mechanical strength. also evaluate emerging strategies interface engineering integration with other techniques, offering insights into scalability environmental considerations process. This valuable resource researchers seeking advance through innovative methods.
Язык: Английский
Процитировано
3Advanced Energy Materials, Год журнала: 2025, Номер unknown
Опубликована: Янв. 31, 2025
Abstract Progress in commercializing solid polymer electrolytes (SPEs) for lithium metal batteries (LMBs) has been impeded by challenges, like concentration polarization, non‐uniform Li + flux, and an unstable electrolyte interface (SEI), which contribute to dendrite formation. To address these issues, silica framework (SF)‐based single‐ion conductors are proposed, featuring a unique solvation channel composed of fluorinated segment, high‐dipole zwitterion, rotation‐motion‐driven ion‐hopping medium. This design promotes low resistance at the cathode/electrode interface, suppresses growth anode/electrolyte maintains uniform flux. results show that continuous ion channels within robust enhance Li‐ion dissociation transport, achieving high ionic conductivity (σ DC = 8.8 × 10 −4 S cm −1 ), modulus 0.9 GPa, transference number (≈0.83), extended electrochemical stability window (up 5.2 V) 25 °C. fosters formation hybrid organic/inorganic SEI layer 2 CO 3 , LiF, O, enabling ultra‐stable plating/stripping over 4000 h 0.1 mA −2 . Furthermore, full cells demonstrate excellent rate performance long‐term cycling capacity retention (81% Li||LFP 86% Li||NCM811 after 400 cycles 1 C) coulombic efficiency, offering promising strategy stable LMBs.
Язык: Английский
Процитировано
0Chemical Engineering Journal, Год журнала: 2025, Номер unknown, С. 160434 - 160434
Опубликована: Фев. 1, 2025
Язык: Английский
Процитировано
0Journal of Colloid and Interface Science, Год журнала: 2025, Номер 693, С. 137586 - 137586
Опубликована: Апрель 12, 2025
Язык: Английский
Процитировано
0ACS Applied Energy Materials, Год журнала: 2025, Номер unknown
Опубликована: Апрель 16, 2025
Язык: Английский
Процитировано
0Journal of Power Sources, Год журнала: 2025, Номер 647, С. 237343 - 237343
Опубликована: Май 14, 2025
Язык: Английский
Процитировано
0