Mechanical and Microstructural Characteristics of Inconel 625 Alloy After Exposure to Elevated Temperature and H2SO4 Solution Quenching DOI
Saurabh Dewangan,

Gautam Maheshwari,

Shajar

и другие.

Journal of The Institution of Engineers (India) Series C, Год журнала: 2024, Номер unknown

Опубликована: Дек. 27, 2024

Язык: Английский

Laser cladding of FeCoCrNiTi high-entropy alloy coatings to modulate the microstructure and enhance the tribo-corrosion behavior on 304 stainless steel DOI

Kaihong Zheng,

Dan Yu, Junli Liu

и другие.

Surface and Coatings Technology, Год журнала: 2025, Номер unknown, С. 132114 - 132114

Опубликована: Апрель 1, 2025

Язык: Английский

Процитировано

3
Impact of Fabrication Method on the Corrosion Behavior of Heat-Treated Nickel Aluminum Bronze (NAB) Alloy: A Comparison of Laser Powder Bed Fusion (L-PBF) and Laser Directed Energy Deposition (L-DED) Techniques DOI Creative Commons
Khashayar Morshed-Behbahani,

Addison J. Rayner,

D.P. Bishop

и другие.

Colloids and Surfaces A Physicochemical and Engineering Aspects, Год журнала: 2024, Номер unknown, С. 136069 - 136069

Опубликована: Дек. 1, 2024

Язык: Английский

Процитировано

3
Analysing the effect of thermal and acidic treatment on tensile properties and microstructure of Inconel-625 DOI
Aditi Agarwal,

Gautam Maheshwari,

Shajar

и другие.

Canadian Metallurgical Quarterly, Год журнала: 2024, Номер unknown, С. 1 - 12

Опубликована: Ноя. 18, 2024

Inconel 625 alloy, known for its excellent corrosion resistance and strength retention even at high temperature, is widely employed in a variety of industrial sectors. This study investigates the mechanical characteristics alloy following high-temperature heating then subsequent quenching 12.5%, 18.5%, 24.5% H2SO4 solutions. Thermally treated acidic quenched samples were compared with their untreated counterparts. Owing to treatments, weight per centage Ni, Cr, Mo have been improved bit owing enrichment γ phases over surface. Heat treatments Inconel-625 resulted production secondary like (chromium oxides) which led reduce ultimate yield strengths. Some pitting phenomena element segregation observed through 'optical microscopy (OM)' 'field emission scanning electron (FESEM)'. As soon as chemical concentration increases, precipitation occurs towards austenite grain boundary results enhancement elongation before tensile failure.

Язык: Английский

Процитировано

1
Mechanical and Microstructural Characteristics of Inconel 625 Alloy After Exposure to Elevated Temperature and H2SO4 Solution Quenching DOI
Saurabh Dewangan,

Gautam Maheshwari,

Shajar

и другие.

Journal of The Institution of Engineers (India) Series C, Год журнала: 2024, Номер unknown

Опубликована: Дек. 27, 2024

Язык: Английский

Процитировано

0