Investigating Flow and Heat Distribution of NE‐PCM in a Double Lid‐Driven MHD Octagonal Chamber DOI Open Access

Benyahia ilias,

Ali Alahmer, Aissa Abderrahmane

и другие.

Heat Transfer, Год журнала: 2025, Номер unknown

Опубликована: Март 20, 2025

ABSTRACT Mixed heat transfer, commonly encountered in engineering applications, has led to a strong focus on maximizing transmission rates. This study explores transfer enhancement within magnetohydrodynamic (MHD) double lid‐driven octagonal cavity. The cavity is filled with porous media and loaded nano‐encapsulated phase change material (NE‐PCM), subjected uniform magnetic field. Galerkin finite element method (GFEM) employed solve the governing equations. Key factors investigated include lid speed (Reynolds number, Re = 1–500), wall movement directions, field intensity (Hartmann Ha 0–100), porosity (Darcy Da 10 −5 –10 −2 ) their effects numerical was validated by comparing results well‐documented data from literature. findings reveal that higher values significantly enhance rates, while reduce Specifically, at highest Re, increasing enhanced averaged Nusselt number ( Nu 165%, 0 100 decreased it 16%. Additionally, moving both walls same direction improved average 350% compared opposing movement. also found NE‐PCM concentration had minimal impact efficiency, reducing chamber permeability hindered suspension movement, thereby between hot cold surfaces.

Язык: Английский

Numerical analysis of nano-encapsulated PCM convection in partially porous annular cavities: MHD and Soret-Dufour effects DOI
Ahmed M. Hassan, Mohammed Azeez Alomari, Qusay H. ‎Al-Salami

и другие.

Journal of Energy Storage, Год журнала: 2024, Номер 101, С. 113777 - 113777

Опубликована: Сен. 17, 2024

Язык: Английский

Процитировано

11

Energy storage hydrothermal and entropy analysis of micro-polar Nano-encapsulated phase change materials under the effect of exothermic reaction and external magnetic field DOI Creative Commons
Ahmed M. Hassan, Mohammed Azeez Alomari, Abdalrahman Alajmi

и другие.

Case Studies in Thermal Engineering, Год журнала: 2025, Номер unknown, С. 106010 - 106010

Опубликована: Март 1, 2025

Язык: Английский

Процитировано

0

Investigating Flow and Heat Distribution of NE‐PCM in a Double Lid‐Driven MHD Octagonal Chamber DOI Open Access

Benyahia ilias,

Ali Alahmer, Aissa Abderrahmane

и другие.

Heat Transfer, Год журнала: 2025, Номер unknown

Опубликована: Март 20, 2025

ABSTRACT Mixed heat transfer, commonly encountered in engineering applications, has led to a strong focus on maximizing transmission rates. This study explores transfer enhancement within magnetohydrodynamic (MHD) double lid‐driven octagonal cavity. The cavity is filled with porous media and loaded nano‐encapsulated phase change material (NE‐PCM), subjected uniform magnetic field. Galerkin finite element method (GFEM) employed solve the governing equations. Key factors investigated include lid speed (Reynolds number, Re = 1–500), wall movement directions, field intensity (Hartmann Ha 0–100), porosity (Darcy Da 10 −5 –10 −2 ) their effects numerical was validated by comparing results well‐documented data from literature. findings reveal that higher values significantly enhance rates, while reduce Specifically, at highest Re, increasing enhanced averaged Nusselt number ( Nu 165%, 0 100 decreased it 16%. Additionally, moving both walls same direction improved average 350% compared opposing movement. also found NE‐PCM concentration had minimal impact efficiency, reducing chamber permeability hindered suspension movement, thereby between hot cold surfaces.

Язык: Английский

Процитировано

0