Catalytic ozonation for the removal of methyl orange in water using iron-coated moringa oleifera seeds husk DOI
Amir Ikhlaq,

Hira Nawab,

Abdullah Yasar

и другие.

Process Safety and Environmental Protection, Год журнала: 2025, Номер unknown, С. 107248 - 107248

Опубликована: Май 1, 2025

Язык: Английский

Green synthesis, characterization, antimicrobial activity, and optimization of iron oxide nanoparticles for efficient Acid Red 73 dye removal from aqueous solution by a Taguchi approach DOI

Ahmed E. Alprol,

Mohamed A. El‐Sheikh, Paulo Pereira

и другие.

Biomass Conversion and Biorefinery, Год журнала: 2025, Номер unknown

Опубликована: Янв. 26, 2025

Язык: Английский

Процитировано

2

Triclosan removal from synthetic solution using corn cobs and their magnetic composites: Insights from batch adsorption and fixed-bed column studies DOI Creative Commons
Cristina E. Almeida‐Naranjo, Fabián Santana-Romo,

Elvia Gallegos-Castro

и другие.

Industrial Crops and Products, Год журнала: 2025, Номер 228, С. 120917 - 120917

Опубликована: Март 31, 2025

Язык: Английский

Процитировано

1

Effective removal of malachite green from local dyeing wastewater using zinc-tungstate based materials DOI Creative Commons

Hassana Ladio Abubakar,

Jimoh Oladejo Tijani,

Ambali Saka Abdulkareem

и другие.

Heliyon, Год журнала: 2023, Номер 9(9), С. e19167 - e19167

Опубликована: Авг. 16, 2023

The frequent use of an industrial dye such as malachite green (MG) has caused major water body deterioration and is one the most pressing global challenges, demanding effective treatment techniques. To solve these issues, a simplistic method was developed to synthesize zinc-tungstate (ZnWO4) nanoparticles also dope surface matrix ZnWO4 using nonmetals boron (B), carbon (C), nitrogen (N) at different ratios for enhanced MG removal from wastewater. prepared nanomaterials were characterized by methods crystal structure composition, properties, morphology, microstructures, functional groups, elemental oxidation states. BET analysis revealed mesoporous with areas 30.740 m2/g ZnWO4, 38.513 ZnWO4@BCN, 37.368 ZnWO4@BCN/B, 39.325 ZnWO4@BCN/C, 45.436 ZnWO4@BCN/N nanocomposites. best accomplished pH (8), contact period (50 min), nanoadsorbent dose (0.8 g/L), initial concentration (20 mg/L), temperature (303 K). maximum adsorption capacities towards 218.645 251.758 mg/g, respectively. At equilibrium, Freundlich isotherm pseudo-second-order kinetic models fits experimental data on both nanoadsorbents. After eight cycles desorption, found be good removing MG, efficiencies 71.00 74.20%, Thermodynamic investigations further validated spontaneity endothermic nature process. All study findings confirm nanoadsorbents exceptional capability economic feasibility dye.

Язык: Английский

Процитировано

23

Recent advances in the effective removal of hazardous pollutants from wastewater by using nanomaterials—A review DOI Creative Commons
Mamta Chahar, Sarita Khaturia, Har Lal Singh

и другие.

Frontiers in Environmental Science, Год журнала: 2023, Номер 11

Опубликована: Авг. 4, 2023

Environmental nanotechnology has developed rapidly over the past few decades due to fast advancement of and nanomaterials (NMs). Due their nanoscale size, NMs are receiving immense attention in research development worldwide. Their nano size led better catalysis, high reactivity, adsorption capacity. In wastewater treatment, significant potential improve performance efficiency water decontamination; more effectively, it provides a sustainable way keep supplies safe. Numerous studies have found that removing harmful components from by employing nanoparticles conjunction with various treatment methods is effective. The purpose current investigation conduct review envisioned applications wastewater. These include carbonaceous NMs, metal-containing nanoparticles, nanocomposites, all which will be reviewed highlighted depth.

Язык: Английский

Процитировано

20

The performance of multi-walled carbon nanotubes-based filters with acid functionalization for enhanced methylene blue removal from water resources DOI Creative Commons
B. Deepanraj, Vineet Tirth, Ali Algahtani

и другие.

Alexandria Engineering Journal, Год журнала: 2024, Номер 88, С. 310 - 316

Опубликована: Янв. 20, 2024

In the current investigation, functionalization of multiwalled carbon nanotubes (MWCNTs-TMD) is conducted to enhance adsorption potential applications. A ratio 1:3 oxidizing acids (HNO3 and H2SO4) used attach oxygen functional groups surface MWCNTs prepared sample F-MWCNT. To examine morphology functionalized tubes in samples, transmission electron microscopy scanning were utilized. Meanwhile, energy dispersive X-ray, X-ray diffraction analysis employed account for elemental composition structure, respectively. The data obtained from these investigations revealed a notable decrease length diameter tubes. efficiency F-MWCNTs was examined by methylene blue removal aqueous solutions. results demonstrated that percentage could reach 80%. Functionalized have greater area than pristine one, which improves MWCNTs-based filters water purification. process provides an effective approach modify significantly enhances their efficiency.

Язык: Английский

Процитировано

8

Advancements in nanoparticle-modified zeolites for sustainable water treatment: An interdisciplinary review DOI

Álvaro de Jesús Ruíz-Baltazar

The Science of The Total Environment, Год журнала: 2024, Номер 946, С. 174373 - 174373

Опубликована: Июль 2, 2024

Язык: Английский

Процитировано

8

Green technology: synthesis of iron-modified biochar derived from pine cones to remove azithromycin and ciprofloxacin from water DOI Creative Commons

Sadia Aziz,

Sundus Anbreen,

Iqra Iftikhar

и другие.

Frontiers in Environmental Science, Год журнала: 2024, Номер 12

Опубликована: Март 7, 2024

The rise of antibiotic pollutants in water threatens ecosystems and human health. Iron-modified biochar (BC) exhibits adsorption properties offers a promising approach for effective environmental remediation. current study explored the potential iron-loaded synthesized from pine cones removal water. In this study, cones, sustainable renewable source, were used to produce iron-modified employed remove azithromycin, ciprofloxacin, their mixture aqueous solutions. Biochar was through pyrolysis modified by addition iron salts. analysis Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) suggested crystalline structure rich minerals functional groups (O–H, C=O, C≡C) loaded with iron, having plate-like roughness distorted morphology along sharp edges corners. Antibiotic evaluated changing physical parameters, including dose, pH, temperature. maximum percentages obtained as 87.8%, 91.3%, 84%, respectively, at low Fe-modified higher Application kinetic models that antibiotics on is more inclined toward pseudo-second-order ( R 2 > 0.98) kinetics, indicating chemisorption nature process. findings highlight removing

Язык: Английский

Процитировано

7

Box-Behnken Design Optimization of photocatalytic performance of ZnWO4 nanoparticles multiple doped with selected metals DOI

Hassana Ladio Abubakar,

Jimoh Oladejo Tijani, S. Mustapha

и другие.

Inorganic Chemistry Communications, Год журнала: 2025, Номер unknown, С. 114012 - 114012

Опубликована: Янв. 1, 2025

Язык: Английский

Процитировано

1

Adsorption and Advanced Oxidation Processes for Sustainable Treatment of Oil Produced Water and Organic Wastewater. A Review DOI
Mohammed Jaafar Ali Alatabe, Mohammad Ghorbanpour, Ali Farzi

и другие.

Russian Journal of Applied Chemistry, Год журнала: 2025, Номер unknown

Опубликована: Март 4, 2025

Язык: Английский

Процитировано

1

Eco-friendly production of cellulosic fibers from Scots pine wood and sustainable nanosilver modification: A path toward sustainability DOI Creative Commons
K. M. Faridul Hasan, Simang Champramary,

KM Noman Al Hasan

и другие.

Results in Engineering, Год журнала: 2023, Номер 19, С. 101244 - 101244

Опубликована: Июнь 19, 2023

This study presents a novel approach for the production of cellulosic fibers from scots pine wood and their subsequent surface modification with greenly synthesized silver nanoparticles (AgNPs), leading to remarkable color effects improved functionalities, particularly enhanced thermal stability. The size distribution fiber (SPF)materials was determined through sieve analysis, revealing conversion particles 1.25 mm 0.8 in size. AgNPs were biosynthesized situ on using same as sustainable stabilizing reducing agent. Scanning electron microscopy (SEM) employed investigate morphologies control AgNP-deposited samples, indicating uniform nanosilver coated surfaces SPF material. concentration quantitatively measured X-ray fluorescence (XRF) tests, ranging 4149 ± 43 6329 55 parts per million (PPM) depending AgNP concentration. weight percentage by SEM-mediated energy-disruptive (EDX) analysis. Additional analyses, Fourier transform infrared spectroscopy (FTIR) test also conducted. Thermal stability tests demonstrated an improving trend correlated increasing loading modified materials. coefficients variation (R2) exhibited significant relationship between most parameters. Overall, this research pioneering eco-friendly synthesis onto defibrated fibers, thus establishing new benchmark manufacturing processes.

Язык: Английский

Процитировано

14