Journal of Alloys and Compounds, Год журнала: 2024, Номер unknown, С. 177960 - 177960
Опубликована: Дек. 1, 2024
Язык: Английский
Journal of Alloys and Compounds, Год журнала: 2024, Номер unknown, С. 177960 - 177960
Опубликована: Дек. 1, 2024
Язык: Английский
Solar Energy Materials and Solar Cells, Год журнала: 2025, Номер 285, С. 113532 - 113532
Опубликована: Фев. 21, 2025
Язык: Английский
Процитировано
0Applied Sciences, Год журнала: 2025, Номер 15(5), С. 2543 - 2543
Опубликована: Фев. 27, 2025
Thermal energy storage (TES) systems are essential components of concentrating solar power (CSP) plants that enable uniform generation green electricity and process heat. The performance sensible heat TES based on granular material solid blocks was experimentally analyzed during the discharge process. A system studied in its operation as a regular fluidized bed confined restricted motion via mechanical confinement. pressure drop required to circulate transfer fluid (HTF) through made alumina measured be two orders magnitude lower than used system, being close 0.2 bar for decreasing from 0.65 0.3 bed. evolution exergy efficiency along determined by obtaining an inversed exponential reduction parabolic block roughly value system. considering HTF parasitic consumption plant, remained higher 90% complete
Язык: Английский
Процитировано
0Science China Technological Sciences, Год журнала: 2025, Номер 68(6)
Опубликована: Апрель 17, 2025
Язык: Английский
Процитировано
0Ceramics International, Год журнала: 2024, Номер unknown
Опубликована: Дек. 1, 2024
Язык: Английский
Процитировано
1Applied Energy, Год журнала: 2024, Номер 376, С. 124269 - 124269
Опубликована: Авг. 31, 2024
The solar-assisted calcium looping process has gained more and interest in recent years. It allows both the capture of CO2 storage solar energy during sorbent regeneration, removing request auxiliary fuels for heat supply. effect carbonation or calcination temperatures on performance been widely studied but mainly based individual factors. This study investigated combined deactivation carrying capacity a (10 calcination‑carbonation cycles) directly irradiated fluidized bed, to obtain optimized operating with conceptual reference integration polyethylene terephthalate (PET) steam gasification. were 600–700 °C 800–900 °C, respectively, while inlet concentration was set at 10%v following previous results PET experimental showed that increasing promoted deactivation, temperature had negligible effect. Fitting parameters models obtained by varying performed well prediction, which broadens application these different temperatures. best condition maximal averaged degree 600 800 °C. However, considering hydrogen yield transfer gasification, second-best (carbonation 650 850 °C) would be preferable gasification process. optimization all combinations provided, so required can accordingly chosen also other processes looping.
Язык: Английский
Процитировано
0Powder Technology, Год журнала: 2024, Номер unknown, С. 120506 - 120506
Опубликована: Ноя. 1, 2024
Язык: Английский
Процитировано
0Journal of Alloys and Compounds, Год журнала: 2024, Номер unknown, С. 177960 - 177960
Опубликована: Дек. 1, 2024
Язык: Английский
Процитировано
0