Improving the Degree of Surface Isotropy of Parts Manufactured Using Hybrid Machining Processes DOI Open Access
Daniel Grochała, Rafał Grzejda, Jerzy Jóźwik

и другие.

Coatings, Год журнала: 2025, Номер 15(4), С. 461 - 461

Опубликована: Апрель 13, 2025

Among the biggest challenges in modern manufacturing techniques is deliberately shaping surface layer of a part to suit conditions which it will be used. The degree difficulty increases with increase functional requirements items manufactured and complexity technology developed. Hybrid machining processes allow surfaces shaped by combining different operations into single operation. values amplitude length parameters resulting geometrical texture are largely determined technological combined operations. However, tool guidance kinematic–geometric during hybrid process that responsible for texture. This paper describes results an investigation influence milling strategy tooling burnishing workpieces made 42CrMo4 steel tempered hardness 35 ± 2 HRC—a material commonly used construction machine parts. It was shown running two crossing passes oriented obliquely marks left cutter most favourable strategies tested.

Язык: Английский

Improving the Degree of Surface Isotropy of Parts Manufactured Using Hybrid Machining Processes DOI Open Access
Daniel Grochała, Rafał Grzejda, Jerzy Jóźwik

и другие.

Coatings, Год журнала: 2025, Номер 15(4), С. 461 - 461

Опубликована: Апрель 13, 2025

Among the biggest challenges in modern manufacturing techniques is deliberately shaping surface layer of a part to suit conditions which it will be used. The degree difficulty increases with increase functional requirements items manufactured and complexity technology developed. Hybrid machining processes allow surfaces shaped by combining different operations into single operation. values amplitude length parameters resulting geometrical texture are largely determined technological combined operations. However, tool guidance kinematic–geometric during hybrid process that responsible for texture. This paper describes results an investigation influence milling strategy tooling burnishing workpieces made 42CrMo4 steel tempered hardness 35 ± 2 HRC—a material commonly used construction machine parts. It was shown running two crossing passes oriented obliquely marks left cutter most favourable strategies tested.

Язык: Английский

Процитировано

0