Process Safety and Environmental Protection, Год журнала: 2025, Номер unknown, С. 107200 - 107200
Опубликована: Апрель 1, 2025
Язык: Английский
Process Safety and Environmental Protection, Год журнала: 2025, Номер unknown, С. 107200 - 107200
Опубликована: Апрель 1, 2025
Язык: Английский
Environmental Research, Год журнала: 2025, Номер unknown, С. 121303 - 121303
Опубликована: Март 1, 2025
Язык: Английский
Процитировано
0Journal of Composites Science, Год журнала: 2025, Номер 9(3), С. 126 - 126
Опубликована: Март 10, 2025
The industrial production of palm oil generates substantial amounts Spent Bleaching Earth (SBE), a waste byproduct from the bleaching process. In Malaysia and Indonesia, SBE is typically landfilled, causing environmental risks such as greenhouse gas emissions contamination. Wastewater rubber industry also contains harmful pollutants that require effective treatment. This study proposes sustainable solution by converting into carbon composites (CCs) for treating wastewater. Characterization CCs using XRD, BET, FESEM, FTIR revealed its porous structure, high surface area, functional groups, contributing to excellent adsorption properties. Response Surface Methodology (RSM) optimized treatment conditions, determining 90.56 min contact time 0.75 g adsorbent weight optimal maximum chemical oxygen demand (COD) turbidity removal. Quadratic models showed R2 values 0.8828 COD removal 0.8336 reduction, with numerical optimization achieving 90.30% reduction 49.02% Verification experiments confirmed model reliability minimal deviation (0.37%). These findings demonstrate potential SBE-derived an eco-friendly challenges in industries.
Язык: Английский
Процитировано
0Minerals, Год журнала: 2025, Номер 15(3), С. 304 - 304
Опубликована: Март 15, 2025
The conventional manganese carbonate preparation process faces challenges such as low resource utilization efficiency and difficulties in treating by-product Mg-containing ammonium sulfate solution. In this study, a two-stage leaching was developed to efficiently extract Mn Mg from the ore. NH4HCO3 used precipitant convert Mn2+ leachate MnCO3, achieving precipitation of 99.89%, resulting product contained 44.45% Mn, meeting first-class indicators HG/T 4203-2011 (Chinese standard on for industrial use). To further enhance utilization, combined stripping–adsorption designed treat solution generated during carbonization process. Subsequently, economically valuable gypsum magnesium oxide products were prepared. Additionally, 88.20% NH3 stripped recycled prepare then carbonization. Finally, purified free ammonia nitrogen obtained using 001×7 resin dynamically adsorb filtrates stripping process, maximum adsorption capacity 51.14 mg/g. This provides novel approach clean production industry.
Язык: Английский
Процитировано
0Process Safety and Environmental Protection, Год журнала: 2025, Номер unknown, С. 107200 - 107200
Опубликована: Апрель 1, 2025
Язык: Английский
Процитировано
0