A High‐Entropy Intergrowth Layered‐Oxide Cathode with Enhanced Stability for Sodium‐Ion Batteries DOI
Yanfei Pang, Yingshuai Wang, Chunyu Jiang

и другие.

ChemSusChem, Год журнала: 2024, Номер unknown

Опубликована: Июнь 13, 2024

Layered transition metal oxides are widely considered as ideal cathode materials for SIBs. However, the existing P2 and O3 structures possess specific issues, which limit their practical applications. To address these this work designed a novel intergrowth layered oxide with phases by implementing Cu Ti into structure formation of high-entropy superior performance The electrochemical test results show that optimized P2/O3 possesses high initial discharge capacity 157.85 mAh g

Язык: Английский

Recent Advances in High‐Entropy Layered Oxide Cathode Materials for Alkali Metal‐Ion Batteries DOI
Liping Duan, Yingna Zhang,

Haowei Tang

и другие.

Advanced Materials, Год журнала: 2024, Номер unknown

Опубликована: Окт. 29, 2024

Abstract Since the electrochemical de/intercalation behavior is first detected in 1980, layered oxides have become most promising cathode material for alkali metal‐ion batteries (Li + /Na /K ; AMIBs) owing to their facile synthesis and excellent theoretical capacities. However, inherent drawbacks of unstable structural evolution sluggish diffusion kinetics deteriorate performance, limiting further large‐scale applications. To solve these issues, novel strategy high entropy has been widely applied oxide cathodes AMIBs recent years. Through multielement synergy stabilization effects, high‐entropy (HELOs) can achieve adjustable activity enhanced stability. Herein, basic concepts, design principles, methods HELO are introduced systematically. Notably, it explores detail improvements on limitations oxides, highlighting latest advances materials field AMIBs. In addition, introduces advanced characterization calculations HELOs proposes potential future research directions optimization strategies, providing inspiration researchers develop areas energy storage conversion.

Язык: Английский

Процитировано

37

A high-rate and air-stable cathode material for sodium-ion batteries: yttrium-substituted O3-type Ni/Fe/Mn-based layered oxides DOI
Chunyu Jiang, Yingshuai Wang, Yuhang Xin

и другие.

Journal of Materials Chemistry A, Год журнала: 2024, Номер 12(23), С. 13915 - 13924

Опубликована: Янв. 1, 2024

The electrochemical properties of O3-NaNi 1/3 Fe 1/3− x Mn Y O 2 cathode materials for sodium ion batteries are significantly improved by using yttrium substitution strategy to realize the micro-modulation crystal structure.

Язык: Английский

Процитировано

26

Reviving Sodium Tunnel Oxide Cathodes Based on Structural Modulation and Sodium Compensation Strategy Toward Practical Sodium‐Ion Cylindrical Battery DOI Open Access
Hanxiao Liu, Lingyi Kong, Hongrui Wang

и другие.

Advanced Materials, Год журнала: 2024, Номер 36(41)

Опубликована: Сен. 2, 2024

Abstract As a typical tunnel oxide, Na 0.44 MnO 2 features excellent electrochemical performance and outstanding structural stability, making it promising cathode for sodium‐ion batteries (SIBs). However, suffers from undesirable challenges such as surface residual alkali, multiple voltage plateaus, low initial charge specific capacity. Herein, an internal external synergistic modulation strategy is adopted by replacing part of the Mn with Ti to optimize bulk phase construct Ti‐containing epitaxial stabilization layer, resulting in reduced + transport kinetics improved water/air stability. Specifically, 0.85 0.15 O using water‐soluble carboxymethyl cellulose binder can realize capacity retention rate 94.30% after 1,000 cycles at 2C, stability further verified kilogram large‐up applications. In addition, taking advantage rich content Prussian blue analog (PBA), PBA‐Na 1‐x x composites are designed compensate insufficient oxide matched hard carbon achieve preparation coin full cell 18650 cylindrical battery satisfactory performance. This work enables application oxides SIBs first time promotes commercialization SIBs.

Язык: Английский

Процитировано

21

Structure Reconstruction Strategy for Controlled Pore Closure via Surface Coating in Coal-Based Hard Carbon for Enhancing Sodium Storage Performance DOI

Guokan Liu,

Jialiang Yuan,

Zhuangzhi Li

и другие.

Carbon, Год журнала: 2025, Номер unknown, С. 120085 - 120085

Опубликована: Фев. 1, 2025

Язык: Английский

Процитировано

3

Structural Engineering of Prussian Blue Analogues Enabling All-Climate and Ultralong Cycling Sodium-Ion Batteries DOI
Jian Peng, Weibo Hua, Zhuo Yang

и другие.

ACS Nano, Год журнала: 2024, Номер unknown

Опубликована: Июль 15, 2024

The development of cost-efficient, long-lifespan, and all-climate sodium-ion batteries is great importance for advancing large-scale energy storage but plagued by the lack suitable cathode materials. Here, we report low-cost Na-rich Mn-based Prussian blue analogues with superior rate capability ultralong cycling stability over 10,000 cycles via structural optimization electrochemically inert Ni atoms. Their thermal stability, properties, potential in full cells are investigated detail. Multiple situ characterizations reveal that outstanding performances benefit from their highly reversible three-phase transformations trimetal (Mn–Ni–Fe) synergistic effects. In addition, a high sodium diffusion coefficient low volume distortion 2.3% observed through transmission electron microscopy first-principles calculations. Our results provide insights into engineering advanced applications.

Язык: Английский

Процитировано

18

Multieffect Preoxidation Strategy to Convert Bituminous Coal into Hard Carbon for Enhancing Sodium Storage Performance DOI

Guokan Liu,

Jialiang Yuan,

Haoyu Li

и другие.

ACS Applied Materials & Interfaces, Год журнала: 2024, Номер 16(35), С. 46226 - 46236

Опубликована: Авг. 22, 2024

Preoxidation is an effective strategy to inhibit the graphitization of coals during carbonization. However, single effect traditional preoxidation could barely increase surface-active sites, hindering further enhancement sodium storage. Herein, a multieffect was proposed suppress structural rearrangement and create abundant sites. Mg(NO3)2·6H2O helps introduce oxygen-containing functional groups into bituminous coal at 450 °C, which acted as cross-linking agent carbon layers promote subsequent thermal carbonization process. Besides, residue solid decomposition product MgO would react with The obtained coal-based hard contained more pseudographitic domains storage active optimized sample deliver excellent capacity 287.1 mAh g–1 20 mA g–1, well remarkable cycling stability retention 96.1% after 200 cycles 50 notable 88.9% 1000 300 g–1. This work provides practical convert low-cost advanced anodes for sodium-ion batteries (SIBs).

Язык: Английский

Процитировано

11

Cation Configuration and Structural Degradation of Layered Transition Metal Oxides in Sodium-Ion Batteries DOI
Tingting Yang, Xingyu Wang,

Zhengbo Liu

и другие.

ACS Nano, Год журнала: 2024, Номер 18(29), С. 18834 - 18851

Опубликована: Июль 12, 2024

Given the pressing depletion of lithium resources, sodium-ion batteries (SIBs) stand out as a cost-effective alternative for energy storage solutions in near future. Layered transition metal oxides (LTMOs) emerge leading cathode materials SIBs due to their superior specific capacities and abundant raw materials. Nonetheless, achieving long-term stability LTMOs remains challenge inevitable structural degradation during charge–discharge cycles. The complexity diversity cation configurations/superstructures within layers (TMO2) further complicate understanding newcomers. Therefore, it is critical summarize discuss factors available strategies enhancing LTMOs' stability. In this review, cationic configurations TMO2 are introduced from crystallographic perspective. It then identifies examines four key responsible decay, alongside impacts various modification strategies. Finally, more effective practical research approaches investigating have been proposed. work aims enhance comprehension deterioration facilitate substantial improvement cycle life density.

Язык: Английский

Процитировано

10

A Customized Strategy Realizes Stable Cycle of Large‐Capacity and High‐Voltage Layered Cathode for Sodium‐Ion Batteries DOI
Bo Peng, Zihao Zhou,

Shi Ji

и другие.

Angewandte Chemie International Edition, Год журнала: 2024, Номер unknown

Опубликована: Сен. 20, 2024

High-voltage P2-Na

Язык: Английский

Процитировано

10

Modulating the structure of O3-type NaNi1/3Fe1/3Mn1/3O2 for high-performance sodium-ion batteries via Na2MoO4 reactive wetting coating combined with Mo doping and interface reconstruction DOI

Miaoyan Song,

Lin Xu,

Kemeng Wang

и другие.

Journal of Colloid and Interface Science, Год журнала: 2025, Номер 684, С. 148 - 158

Опубликована: Янв. 13, 2025

Язык: Английский

Процитировано

2

Induction effect in oxygen-deficient vanadate for high-performance sodium ion batteries: d-p orbital coupling and vacancy-modulated cathode electrolyte interphase DOI
Chao Chen, Kai Li, Yun Gong

и другие.

Journal of Power Sources, Год журнала: 2025, Номер 631, С. 236218 - 236218

Опубликована: Янв. 15, 2025

Язык: Английский

Процитировано

2