Modified with Boron nitride nanoparticles on polyamide fabrics DOI Creative Commons

I. V. Loktionova,

P. V. Abakumov, A. P. Kuzmenko

и другие.

Proceedings of the Southwest State University Series Engineering and Technologies, Год журнала: 2024, Номер 14(4), С. 103 - 114

Опубликована: Дек. 13, 2024

Purpose . Investigation of the characteristics polyamide fabric modified with Boron nitride nanoparticles and evaluation its filtration properties. Methods The Raman scattering spectra were measured using a scanning microspectrometer OmegaScope AIST-NT in ZXXZ̅ geometry (λ = 532 nm, W 25mW) spectral resolution 3 cm -1 crystalline structure was studied X-ray diffraction on GBC EMMA diffractometer (Bragg-Brentano scheme, A 0.154 step size 0.02°). properties investigated an SF-2000 spectrophotometer range 450-750 nm. modeling interaction between inorganic solution molecules carried out Materials Studio 2020 software package Forcite module. Results In patterns nano-particles, peaks identified at 1360 2θ 27.32. coherent regions 0.65 which corresponds to doubled interlayer spacing nitride. change optical density filtrate through ΔD 0.04, corresponding 9.6% increase transparency. Quantum-mechanical showed that van der Waals forces act iron hydroxide fabric, while chemical bonds exist Iron nanoparticles. Conclusion Modification Langmuir-Blodgett method results more intense profile for ordered coatings, immersion ultrasonic dispersion is suitable bulk allowing penetrate structure. These are confirmed by diffractometry. effectiveness improving adsorption also demonstrated.

Язык: Английский

Exploring sustainable adsorbents to mitigate micro-/nano-plastic contamination: perspectives on electrospun fibrous constructs, biochar, and aerogels DOI Creative Commons

Krishna Priyadarshini Das,

Pooja Chauhan, Ulrike Staudinger

и другие.

Environmental Science Advances, Год журнала: 2024, Номер 3(9), С. 1217 - 1243

Опубликована: Янв. 1, 2024

A schematic representation showing the exploration of limitations conventional MNP removal techniques, highlighting potential biochar, electrospun fibrous constructs, and aerogels as sustainable effective solutions for removal.

Язык: Английский

Процитировано

9
Fabrication of 3D Polycaprolactone Macrostructures by 3D Electrospinning DOI Creative Commons

Atchara Chinnakorn,

Yanawarut Soi-Ngoen,

Oratai Weeranantanapan

и другие.

ACS Biomaterials Science & Engineering, Год журнала: 2024, Номер 10(8), С. 5336 - 5351

Опубликована: Май 22, 2024

Building 3D electrospun macrostructures and monitoring the biological activities inside them are challenging. In this study, fibrous polycaprolactone (PCL) were successfully fabricated using in-house electrospinning. The main factors supporting self-assembled nanofiber fabrication H3PO4 additives, flow rate, initial distance. effects of solution concentration, solvent, distance, voltage, nozzle speed on examined. optimal conditions 4 mL/h cm nozzle–collector 14 kV 1 mm/s provided a rapid buildup cylinder with 6 diameter, reaching final height 16.18 ± 2.58 mm wall thickness 3.98 1.01 one perimeter uniform diameter across different sections (1.40 1.10 μm average). Oxygen plasma treatment 30–50 W for 5 min significantly improved hydrophilicity PCL macrostructures, proving suitable scaffold in vitro cell cultures. Additionally, images obtained by synchrotron radiation X-ray tomographic microscopy (SRXTM) presented penetration growth within scaffolds. This breakthrough electrospinning surpasses current limitations, opening new possibilities various fields.

Язык: Английский

Процитировано

4
Electrospun Membranes Loaded with Melanin Derived from Pecan Nutshell (Carya illinoinensis) Residues for Skin-Care Applications DOI Creative Commons
Michell García-García, J.S. Jaime-Ferrer,

Fernanda Nayeli Medrano-Lango

и другие.

Membranes, Год журнала: 2025, Номер 15(2), С. 44 - 44

Опубликована: Фев. 3, 2025

This study investigates the incorporation of melanin extracted from pecan nutshell residues into a polyacrylonitrile (PAN) matrix during electrospinning microfiber membranes. Melanin concentrations 0.5, 2.0, and 5.0% w/w were incorporated to enhance physicochemical biological properties fibers. The melanin-loaded PAN fibers exhibited significant antioxidant activity against DPPH ABTS radicals, with scavenging rates ranging 46.58% 62.77% 41.02% 82.36%, respectively, while unmodified showed no activity. Furthermore, membranes demonstrated antimicrobial effects. also an important enzyme inhibition collagenase (37%), hyaluronidase (22%), tyrosinase (36%), elastase (33%). Molecular docking studies reveal different potential amino acids active sites aging enzymes that interact strongly pigment, particularly collagenase, followed by hyaluronidase, tyrosinase, elastase. These results suggest novel possess promising bioactive applications in skin-care applications.

Язык: Английский

Процитировано

0
Biobased Polymer Composite Nano/Microfibrous Filtering Materials for Efficient Aerosol Filtration DOI
Goda Masionė, Darius Čiužas, Edvinas Krugly

и другие.

Journal of environmental chemical engineering, Год журнала: 2025, Номер unknown, С. 116515 - 116515

Опубликована: Апрель 1, 2025

Язык: Английский

Процитировано

0
Novel Estimation of Nanofiber Diameter from SEM Images Using Deep Feature Embeddings and Machine Learning Models DOI
Aan Priyanto,

Eka Sentia Ayu Listari,

Kamilah Nada Maisa

и другие.

Advanced Theory and Simulations, Год журнала: 2025, Номер unknown

Опубликована: Апрель 17, 2025

Abstract Accurate nanofiber diameter estimation is crucial for optimizing their functionality in materials science. Traditional measurement methods from Scanning Electron Microscopy (SEM) images are often labor‐intensive and subjective. This study proposes a machine learning‐based approach using deep feature embeddings to predict average diameters directly SEM images. Eight learning models—Linear Regression (LR), k‐Nearest Neighbors (kNN), Decision Tree (DT), Random Forest (RF), Support Vector Machine (SVM), Neural Network (NN), Gradient Boosting (GB), AdaBoost—are evaluated 5‐fold 10‐fold cross‐validation. Performance assessed via Mean Squared Error (MSE), Root (RMSE), Absolute (MAE), Percentage (MAPE), R 2 . The kNN model consistently outperformed others across three datasets: smooth nanofibers, beaded combined set. It achieves the lowest error metrics highest (0.950) while demonstrating strong generalization morphologies. among first integrate with direct prediction, providing reliable alternative traditional methods.

Язык: Английский

Процитировано

0
Effect of different ratio KOH treatment on neem bark in the formation of activated carbon: Adsorption characteristics Study DOI
Abdul Karim, Mohammed Danish, Mohd Gulfam Alam

и другие.

Surfaces and Interfaces, Год журнала: 2024, Номер unknown, С. 105476 - 105476

Опубликована: Ноя. 1, 2024

Язык: Английский

Процитировано

1
The advanced electrospinning and 3D platform for designing the personal protective masks DOI
M. Rashidul Islam, Weizhi Liu, Wenjing Sun

и другие.

Journal of the Textile Institute, Год журнала: 2024, Номер unknown, С. 1 - 23

Опубликована: Июнь 18, 2024

This study focuses on the fabrication and design of personal protective masks using electrospinning technology. The addresses importance in context COVID-19 or n-CoV2019 outbreak healthcare settings. Electrospinning, a method for producing ultra-thin, flexible, wearable nanofibers, is explored as basis creating these masks. aims to investigate potential electrospun enhanced performance protection. Through comprehensive review past research studies, contribute knowledge base future scholars. key focus areas include technology, selection materials, process Additionally, discusses characteristics each layer mask, including super hydro performance, filter air purity antibacterial performance. also explores application smart devices, such disposable with respiration sensors, surgical features, 3D-printed highly polluted areas. Overall, this provides valuable insights into development

Язык: Английский

Процитировано

0
Plasma Carbonization of Sustainable Lignin Fiber‐Derived Papers for Supercapacitor Electrodes DOI Creative Commons
Philipp A. Schuster, Chinmaya Mirle,

Lisa Kuske

и другие.

Macromolecular Materials and Engineering, Год журнала: 2024, Номер unknown

Опубликована: Ноя. 18, 2024

Abstract The majority of carbon materials on the market are produced from polyacrylonitrile precursor fibers using high‐temperature oven processes. Despite approaches for green fiber precursors, current stabilization and carbonization processes require large amounts energy render costly environmentally not sustainable. Here, a plasma treatment is employed papers made lignin/polyvinylpyrrolidone fibers. process provides within timeframe few seconds, while degrees porosity, conductivity, hydrophobicity can be tuned. It shown that properties these carbonized suitable application as supercapacitor electrodes with capacitances in range 40 mF g −1 very good cycling stability dropping by less than 20% over 4000 cycles.

Язык: Английский

Процитировано

0
Modified with Boron nitride nanoparticles on polyamide fabrics DOI Creative Commons

I. V. Loktionova,

P. V. Abakumov, A. P. Kuzmenko

и другие.

Proceedings of the Southwest State University Series Engineering and Technologies, Год журнала: 2024, Номер 14(4), С. 103 - 114

Опубликована: Дек. 13, 2024

Purpose . Investigation of the characteristics polyamide fabric modified with Boron nitride nanoparticles and evaluation its filtration properties. Methods The Raman scattering spectra were measured using a scanning microspectrometer OmegaScope AIST-NT in ZXXZ̅ geometry (λ = 532 nm, W 25mW) spectral resolution 3 cm -1 crystalline structure was studied X-ray diffraction on GBC EMMA diffractometer (Bragg-Brentano scheme, A 0.154 step size 0.02°). properties investigated an SF-2000 spectrophotometer range 450-750 nm. modeling interaction between inorganic solution molecules carried out Materials Studio 2020 software package Forcite module. Results In patterns nano-particles, peaks identified at 1360 2θ 27.32. coherent regions 0.65 which corresponds to doubled interlayer spacing nitride. change optical density filtrate through ΔD 0.04, corresponding 9.6% increase transparency. Quantum-mechanical showed that van der Waals forces act iron hydroxide fabric, while chemical bonds exist Iron nanoparticles. Conclusion Modification Langmuir-Blodgett method results more intense profile for ordered coatings, immersion ultrasonic dispersion is suitable bulk allowing penetrate structure. These are confirmed by diffractometry. effectiveness improving adsorption also demonstrated.

Язык: Английский

Процитировано

0