Surface Selenium Coating Promotes Selective Methanol-to-Formate Electrooxidation on Ni3Se4 Nanoparticles DOI
Yong Cai Zhang, Rong Liu, Yi Ma

и другие.

Inorganic Chemistry, Год журнала: 2024, Номер unknown

Опубликована: Ноя. 20, 2024

In the quest to replace fossil fuels and reduce carbon dioxide emissions, developing energy technologies based on clean catalytic processes is fundamental. However, cost-effectiveness of these strongly relies availability efficient catalysts made abundant elements. Herein, this study presents a one-step hydrothermal method obtain series Ni3Se4 nanoparticles with layer amorphous selenium their surface. When employed as electrocatalysts for methanol oxidation reaction (MOR), optimized proper surface Se-coated exhibit high current density 160 mA cm–2 at 1.6 V, achieving methanol-to-formate Faradaic efficiency above 97.8% excellent stability less than 20% decay after an 18 h chronoamperometry test. This performance rationalized using functional theory calculations, which unveil that electrochemical recombination SeOx results in reduction barrier dehydrogenation during MOR process.

Язык: Английский

Electrochemical PET recycling to formate through ethylene glycol oxidation on Ni-Co-S nanosheet arrays DOI
Yi Ma, Luming Li, Jialing Tang

и другие.

Journal of Materials Chemistry A, Год журнала: 2024, Номер 12(48), С. 33917 - 33925

Опубликована: Янв. 1, 2024

Green upcycling of PET plastics via EG oxidation to formate is achieved using layered Ni–Co 9 S 8 nanosheet arrays on nickel foam, with Faraday efficiencies over 90%.

Язык: Английский

Процитировано

8
Improved Methanol-to-Formate Electrocatalytic Reaction by Engineering of Nickel Hydroxide and Iron Oxyhydroxide Heterostructures DOI Creative Commons

Ning Jian,

Huiyao Ge, Yi Ma

и другие.

Science for energy and environment., Год журнала: 2025, Номер unknown, С. 3 - 3

Опубликована: Март 27, 2025

Article Improved Methanol-to-Formate Electrocatalytic Reaction by Engineering of Nickel Hydroxide and Iron Oxyhydroxide Heterostructures Ning Jian 1,2, Huan Ge Yi Ma Yong Zhang Luming Li Junfeng Liu 3, Jing Yu 4, Canhuang Junshan 1,2,* 1 School Mechanic Engineering, Chengdu University, 610106, China 2 Institute for Advanced Study, 3 Energy Research, Jiangsu 212013, 4 Catalonia Research-IREC, Sant Adrià de Besòs, Barcelona 08930, Spain * Correspondence: [email protected] Received: 8 March 2025; Revised: 21 Accepted: 25 Published: 27 2025 Abstract: methanol oxidation reaction (MOR) holds significant value in the chemical industry, as it enables treatment methanol-containing wastewater promotes hydrogen production from water. This study investigates a strategy based on tuning-composition metal elements to optimize MOR performance, aiming outperform current cost-effective efficient catalysts. To this end, nickel hydroxide iron oxyhydroxide heterostructures were synthesized through facile hydrothermal routine, catalytic performance three different Ni/Fe ratios was examined alkaline media. Among them, material with equal ratio exhibited best activity, maintaining high density ~66 mA cm−2 at 1.5 V vs. RHE M KOH electrolyte methanol. Moreover, developed electrode showed Faradaic efficiency (FE) 98.5% formate within continuous 12 h test. Furthermore, function theory (DFT) calculation applied unravel methanol-to-formate conversion mechanism that enhanced proper ratio. These results demonstrate selectivity NiFe-based materials, providing promising non-precious catalyst electrocatalytic upgrading value-added formate.

Язык: Английский

Процитировано

0
Surface Selenium Coating Promotes Selective Methanol-to-Formate Electrooxidation on Ni3Se4 Nanoparticles DOI
Yong Cai Zhang, Rong Liu, Yi Ma

и другие.

Inorganic Chemistry, Год журнала: 2024, Номер unknown

Опубликована: Ноя. 20, 2024

In the quest to replace fossil fuels and reduce carbon dioxide emissions, developing energy technologies based on clean catalytic processes is fundamental. However, cost-effectiveness of these strongly relies availability efficient catalysts made abundant elements. Herein, this study presents a one-step hydrothermal method obtain series Ni3Se4 nanoparticles with layer amorphous selenium their surface. When employed as electrocatalysts for methanol oxidation reaction (MOR), optimized proper surface Se-coated exhibit high current density 160 mA cm–2 at 1.6 V, achieving methanol-to-formate Faradaic efficiency above 97.8% excellent stability less than 20% decay after an 18 h chronoamperometry test. This performance rationalized using functional theory calculations, which unveil that electrochemical recombination SeOx results in reduction barrier dehydrogenation during MOR process.

Язык: Английский

Процитировано

1