Evaluating silver nanoparticles, copper coatings, and zinc oxide nanostructures for antimicrobial medical device applications DOI Creative Commons
Priyeshkumar Thangavel Anandapillai,

S. M. Kamali,

V. Malathy

и другие.

Matéria (Rio de Janeiro), Год журнала: 2024, Номер 29(4)

Опубликована: Янв. 1, 2024

ABSTRACT The increase in hospital-acquired infections (HAIs) associated with medical devices underscores the need for antimicrobial coatings. This study aims to compare efficacy, biocompatibility, ion release, and durability of silver nanoparticles, copper coatings, zinc oxide nanostructures as coatings devices. Coatings were prepared characterized, efficacy tested against E. coli S. aureus via inhibition zone measurements. Silver demonstrated highest effect, zones averaging 90%, while showed moderate 80% 70%, respectively. Biocompatibility, assessed using human fibroblasts an MTT assay, cell viability oxide, followed by silver. Durability tests under simulated physiological conditions indicated that retained over 90% structural integrity, greater degradation. Ion release profiles highlighted silver’s rapid ideal short-term activity, steady, sustained release. These findings suggest immediate infection control, offer balanced long-term safety durability, making them suitable extended applications

Язык: Английский

Bioinspired polylactic acid/polyethylene glycol @ silicon dioxide microfibrous tarpaulin with dual-layer heterogeneous structure for enhanced daytime radiative cooling DOI
Ke Zhao, Heng Zhang, Qian Zhai

и другие.

International Journal of Biological Macromolecules, Год журнала: 2024, Номер 282, С. 136420 - 136420

Опубликована: Окт. 9, 2024

Язык: Английский

Процитировано

4

Bioinspired Adhesives with Debonding-on-Demand Capability DOI
Athanasios Skandalis, Mathieu A. Ayer, Christoph Weder

и другие.

ACS Macro Letters, Год журнала: 2025, Номер unknown, С. 420 - 427

Опубликована: Март 18, 2025

Adhesives with debonding-on-demand (DoD) capability can simplify and improve manufacturing processes, extend the life cycle of products, facilitate recycling, thus attracting fast-growing interest for use in different sectors. A general design approach DoD adhesives is based on supramolecular polymers, which be disassembled by an external stimulus, allowing modification physical properties these materials. However, adhesive strength generally limited to a few megapascals, their synthesis often quite involved. Here, we report that problems overcome family were inspired structure function natural resin shellac. These are linear oligomers bisphenol diglycidyl ether secondary diamines have, despite widespread cross-linked epoxy thermosets, remained unexplored far. We show if molecular weight limited, highly soluble melt-processable produced. Adhesion tests performed lap joints made stainless steel substrates reveal shear 3.5-16 MPa, upper limit this range exceeds bond shellac blueprint many previous adhesives. demonstrate debonding upon heating above glass transition temperature readily possible broken easily rebond without any loss strength.

Язык: Английский

Процитировано

0

Evaluating silver nanoparticles, copper coatings, and zinc oxide nanostructures for antimicrobial medical device applications DOI Creative Commons
Priyeshkumar Thangavel Anandapillai,

S. M. Kamali,

V. Malathy

и другие.

Matéria (Rio de Janeiro), Год журнала: 2024, Номер 29(4)

Опубликована: Янв. 1, 2024

ABSTRACT The increase in hospital-acquired infections (HAIs) associated with medical devices underscores the need for antimicrobial coatings. This study aims to compare efficacy, biocompatibility, ion release, and durability of silver nanoparticles, copper coatings, zinc oxide nanostructures as coatings devices. Coatings were prepared characterized, efficacy tested against E. coli S. aureus via inhibition zone measurements. Silver demonstrated highest effect, zones averaging 90%, while showed moderate 80% 70%, respectively. Biocompatibility, assessed using human fibroblasts an MTT assay, cell viability oxide, followed by silver. Durability tests under simulated physiological conditions indicated that retained over 90% structural integrity, greater degradation. Ion release profiles highlighted silver’s rapid ideal short-term activity, steady, sustained release. These findings suggest immediate infection control, offer balanced long-term safety durability, making them suitable extended applications

Язык: Английский

Процитировано

0