A study on energy dissipation of aramid composite reinforced with a new shear thickening gel (n-STG)/PVA polymer matrix DOI

Nasim Zarrin,

Marjan Abbasi, Mojtaba Sadighi

и другие.

Journal of Composite Materials, Год журнала: 2025, Номер unknown

Опубликована: Фев. 1, 2025

In this article, a new shear thickening gel (n-STG)/Polyvinyl alcohol (PVA) polymer matrix-reinforced interlayers of Kevlar fabrics are used. Rheology and dynamic mechanical analysis (DMTA) tests were used to characterize the shear-thickening properties n-STG. SEM images showed that fabric’s surface was fully covered with n-STG after STG treatment. Two layers an area density 600 g/m 2 (total = 1200 ) compared six levels 200 . The puncture resistance n-STG/Kevlar composite is highest. pull-out test performed investigate inter-yarn friction. low-velocity impact test, absorbs about 90.0% energies. energy-balance model very well matches experimental results. Finally, performance samples examined in response changing energy, weight n-STG, number layers.

Язык: Английский

Study on fumed silica strengthened STG and impact resistance of STS/Kevlar composites DOI
Fenghua Kang, Kun Zhang,

Shengyang Cui

и другие.

Colloid & Polymer Science, Год журнала: 2025, Номер unknown

Опубликована: Фев. 14, 2025

Язык: Английский

Процитировано

1
Experimental study on the impact resistance of fill-enhanced mechanical metamaterials DOI
Weijing Wang,

Hang Yang,

Weiming Zhang

и другие.

International Journal of Mechanical Sciences, Год журнала: 2024, Номер 285, С. 109799 - 109799

Опубликована: Окт. 29, 2024

Язык: Английский

Процитировано

6
A study on energy dissipation of aramid composite reinforced with a new shear thickening gel (n-STG)/PVA polymer matrix DOI

Nasim Zarrin,

Marjan Abbasi, Mojtaba Sadighi

и другие.

Journal of Composite Materials, Год журнала: 2025, Номер unknown

Опубликована: Фев. 1, 2025

In this article, a new shear thickening gel (n-STG)/Polyvinyl alcohol (PVA) polymer matrix-reinforced interlayers of Kevlar fabrics are used. Rheology and dynamic mechanical analysis (DMTA) tests were used to characterize the shear-thickening properties n-STG. SEM images showed that fabric’s surface was fully covered with n-STG after STG treatment. Two layers an area density 600 g/m 2 (total = 1200 ) compared six levels 200 . The puncture resistance n-STG/Kevlar composite is highest. pull-out test performed investigate inter-yarn friction. low-velocity impact test, absorbs about 90.0% energies. energy-balance model very well matches experimental results. Finally, performance samples examined in response changing energy, weight n-STG, number layers.

Язык: Английский

Процитировано

0