FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments

Polymers, Год журнала: 2020, Номер 12(7), С. 1529 - 1529

Опубликована: Июль 10, 2020

Fused deposition modelling (FDM) is one of the fastest-growing additive manufacturing methods used in printing fibre-reinforced composites (FRC). The performances resulting printed parts are limited compared to those by other due their inherent defects. Hence, effort develop treatment overcome these drawbacks has accelerated during past few years. main focus this study review impact defects on mechanical performance FRC and therefore discuss available eliminate or minimize them order enhance functional properties parts. As a combination polymer matrix material continuous short reinforcing fibres, will thoroughly both thermoplastic polymers FRCs via FDM technology, including effect parameters such as layer thickness, infill pattern, raster angle fibre orientation. most common parts, particular, void formation, surface roughness poor bonding between matrix, explored. An inclusive discussion effectiveness chemical, laser, heat ultrasound treatments provided review.

Язык: Английский

---

A critical review on the fused deposition modeling of thermoplastic polymer composites

Composites Part B Engineering, Год журнала: 2020, Номер 201, С. 108336 - 108336

Опубликована: Авг. 22, 2020

Язык: Английский

---

Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials

International Journal of Fatigue, Год журнала: 2020, Номер 143, С. 106007 - 106007

Опубликована: Окт. 22, 2020

Polymer-based materials are increasingly produced through fused deposition modelling (FDM) – an additive manufacturing process, due to its intrinsic advantages in complex shapes and structures at low overhead costs. The versatility of this technology has attracted several industries print geometrical structures. This underlines the importance studying mechanical strength FDM printed polymeric materials, especially their fatigue behaviour cyclic loading conditions. Conventionally manufactured (e.g. injection moulding) have superior performance than materials. Unlike conventionally polymers, FDM-made polymers layer by adhesion influence printing parameters make analysis critical. influences material characteristics a significant impact on these underlying mechanism behind is crucial for assessment structural applications. However, not been reviewed detail. Therefore, article aims evaluate 3D materials' properties. biomedical also reviewed, more importantly, novel architected cellular properties introduced.

Язык: Английский

---

Additively manufactured materials and structures: A state-of-the-art review on their mechanical characteristics and energy absorption

International Journal of Mechanical Sciences, Год журнала: 2023, Номер 246, С. 108102 - 108102

Опубликована: Янв. 6, 2023

Язык: Английский

---

Progress and challenges towards additive manufacturing of SiC ceramic

Journal of Advanced Ceramics, Год журнала: 2021, Номер 10(4), С. 637 - 674

Опубликована: Июль 18, 2021

Abstract Silicon carbide (SiC) ceramic and related materials are widely used in various military engineering fields. The emergence of additive manufacturing (AM) technologies provides a new approach for the fabrication SiC products. This article systematically reviews developed recent years, including Indirect Additive Manufacturing (Indirect AM) Direct (Direct technologies. review also summarizes key scientific technological challenges ceramic, forecasts its possible future opportunities. paper aims to provide helpful guidance other structural ceramics.

Язык: Английский

---

The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing

Polymer Testing, Год журнала: 2020, Номер 93, С. 106925 - 106925

Опубликована: Окт. 23, 2020

The development of fibre composites in recent years has been remarkably strong, owing to their high performance and durability. Various advancements are emerging because increased use a myriad applications. One the popular processing methods is additive manufacturing (AM), however, polymer-fibre manufactured through AM have significantly lower strength compared conventional processes, for instance, injection moulding. This article comprehensive review mechanical testing analysis fabricated AM, particular fused deposition modelling (FDM). highlights effect various parameters, involved FDM composites, on observed properties. In addition, thermal properties based also briefly reviewed. Overall, structured provide an impetus researchers concerned engineering domain gain insight into fibre-reinforced polymeric AM.

Язык: Английский

---

A review of 3D and 4D printing of natural fibre biocomposites

Materials & Design, Год журнала: 2020, Номер 194, С. 108911 - 108911

Опубликована: Июнь 28, 2020

To date, the literature has focused on synthetic fibre-reinforced composites, but it not adequately addressed unique properties that differentiate natural from fibres, such as their variation in microstructure and composition across species. This review paper proposes a critical overview of current state 3D printing composites or biocomposites for mechanical purposes, well an role 4D stimuli-responsive applications. The is structured follows: after first part recalling specificities fibres associated two main sections are each divided into parts presenting analysis available data to provide fundamental understandings discussion outlook future. Natural discontinuous polymers exhibit moderate compared manufactured by conventional processes due specific factors process, high porosity, low fibre content, very fibre-aspect ratio (L/d). Hygromorph BioComposites (HBC) categorized new class smart materials could be used shape-changing mechanisms. Fibre orientation control, continuity outlined relation known challenges actuation performance.

Язык: Английский

---

Advancements and Limitations in 3D Printing Materials and Technologies: A Critical Review

Polymers, Год журнала: 2023, Номер 15(11), С. 2519 - 2519

Опубликована: Май 30, 2023

3D printing has revolutionized various industries by enabling the production of complex designs and shapes. Recently, potential new materials in led to an exponential increase technology's applications. However, despite these advancements, technology still faces significant challenges, including high costs, low speeds, limited part sizes, strength. This paper critically reviews recent trends technology, with a particular focus on their applications manufacturing industry. The highlights need for further development overcome its limitations. It also summarizes research conducted experts this field, focuses, techniques, By providing comprehensive overview printing, review aims provide valuable insights into prospects.

Язык: Английский

---

Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook

Composites Part B Engineering, Год журнала: 2021, Номер 224, С. 109143 - 109143

Опубликована: Июль 18, 2021

Язык: Английский

---

3D printed continuous fiber reinforced composite lightweight structures: A review and outlook

Composites Part B Engineering, Год журнала: 2022, Номер 250, С. 110450 - 110450

Опубликована: Ноя. 30, 2022

Язык: Английский

---