Surface Modification and Thermal Conductivity of PET Fabrics with Butadiene Latex and Carbon Black

Fibers and Polymers, Год журнала: 2025, Номер unknown

Опубликована: Март 24, 2025

Язык: Английский

---

Elevating green materials sustainability through the integration of ceramic particles

Polymer Composites, Год журнала: 2025, Номер unknown

Опубликована: Апрель 9, 2025

Abstract The use of natural fibers as reinforcements in polymer composites has seen significant growth over recent decades. Despite their potential, these face limitations high‐temperature environments. To address this, ceramic particles like silicon carbide (SiC) can be introduced to enhance thermal stability and durability. This study investigates the impact SiC on mechanical characteristics woven bamboo fiber hybrid composites. By incorporating various weight fractions into an epoxy matrix, with three fiber/SiC layers were created using hand layup technique. comprehend synergistic impacts hybridization, mechanical, thermal, physical are used characterize generated samples. study's findings demonstrate that adding secondary reinforcement improves composites' qualities. Results indicate enhances tensile strength, flexural hardness by 33.9%, 13%, 5.8%, respectively. Additionally, thermogravimetric analysis (TGA) demonstrated properties improved increased content. Fracture analyses further revealed role reinforcing composites, making them suitable for both structural applications. Highlights reinforced 10% integration strength 33.9% 13%. 87.5 shore D was obtained during 20% integration. TGA witnessed enhanced rise confirmed excess aids crack nucleation.

Язык: Английский

---

Advancing nanocellulose-based biosensors: pioneering eco-friendly solutions for biomedical applications and sustainable material replacement

International Journal of Biological Macromolecules, Год журнала: 2025, Номер unknown, С. 143057 - 143057

Опубликована: Апрель 1, 2025

Язык: Английский

---

Thermoelastic analysis of variable thickness truncated conical shell subjected to thermomechanical load with internal heat generation using perturbation technique

Mechanics Based Design of Structures and Machines, Год журнала: 2024, Номер 52(10), С. 8032 - 8062

Опубликована: Март 4, 2024

In this article, the behavior of truncated conical shell subjected to thermomechanical loading in their inner and outer layers with internal heat generation source is investigated. The displacement field obeys kinematic first order shear deformation theory first-order temperature used. Two-dimensional analysis has been performed along thickness axis shell, which can be defined under various boundary conditions. set governing equations a system differential variable coefficients are solved by using analytical matched asymptotic expansion perturbations technique. mentioned solution little computational cost, therefore used well parametric studies for optimization. It was shown, axial somehow independent radial its maximum value occurs near upper boundary. expanded direction. Also happens approximately middle length shell. study showed, increase flux layer thereby expanding area application would let more than out. it found, controlling lifetime structure result directing cone angle. results obtained from were compared Finite Element Method (FEM) similar related articles, only show good agreement.

Язык: Английский

---

The Synergetic Effect of 3D Printing and Electrospinning Techniques in the Fabrication of Bone Scaffolds

Annals of Biomedical Engineering, Год журнала: 2024, Номер 52(6), С. 1518 - 1533

Опубликована: Март 26, 2024

Язык: Английский

---