Quantifying the Impact of Cathode Composite Mixing Quality on Active Mass Utilization and Reproducibility of Solid‐State Battery Cells DOI Creative Commons
Maximilian Kissel,

Marie Schosland,

Julia Töws

и другие.

Advanced Energy Materials, Год журнала: 2025, Номер unknown

Опубликована: Апрель 1, 2025

Abstract Research into the development and understanding of solid‐state batteries often relies on pelletized press cells due to their comparative ease use. However, these model are prone comparability reproducibility issues. This study examines extent which cathode composite preparation influences cell performance a reference system comprising LiNi 0.82 Mn 0.07 Co 0.11 O 2 as active material, Li 6 PS 5 Cl solid electrolyte, carbon nanofibers conductive additive, an indium–lithium foil anode. The is prepared either via hand mortaring or in mini vibrating mill. mixing process found be critical for accounts many discrepancies observed capacities different made with identical materials following same assembly protocol. open‐circuit relaxation method implemented quantify mass utilization situ, depends correlates performance. approach allows quantitative differentiation between static kinetic capacity losses during discussion specific values. results demonstrate significance necessity quantifying quality reliable electrochemical data acquisition interpretation.

Язык: Английский

Composition and Structure Design of Poly(vinylidene fluoride)‐Based Solid Polymer Electrolytes for Lithium Batteries DOI
Shengyu Zhou, Shijie Zhong,

Yunfa Dong

и другие.

Advanced Functional Materials, Год журнала: 2023, Номер 33(20)

Опубликована: Фев. 26, 2023

Abstract Solid‐state lithium batteries have become the focus of next‐generation high‐safety due to their dimensional, thermal, and electrochemical stability. Thus, progress solid electrolytes with satisfactory comprehensive performances has key promoting development batteries. Herein, poly(vinylidene fluoride) (PVDF) polymer (SPEs) possess excellent flexibility, mechanical property, high thermal stability, which show huge application potentiality in solid‐state obtain extensive research. But PVDF SPEs been suffering from low ionic conductivity, crystallinity, reactive sites. The PVDF‐based composite (CSPEs) confirmed be a forceful strategy optimize performance electrolytes. In this review, based on different design strategies, recent is introduced detail, especially mechanism conductivity enhancement interface regulation by modified fillers. Besides, applications Li‐S Li‐O 2 battery systems are also introduced. Finally, review presents some insights for high‐performance SPEs.

Язык: Английский

Процитировано

92

A multifunctional Janus layer for LLZTO/PEO composite electrolyte with enhanced interfacial stability in solid-state lithium metal batteries DOI

Tong Duan,

Hongwei Cheng, Yanbo Liu

и другие.

Energy storage materials, Год журнала: 2023, Номер 65, С. 103091 - 103091

Опубликована: Ноя. 26, 2023

Язык: Английский

Процитировано

64

A review of solid-state lithium metal batteries through in-situ solidification DOI
Pan Xu,

Zong‐Yao Shuang,

Chen‐Zi Zhao

и другие.

Science China Chemistry, Год журнала: 2023, Номер 67(1), С. 67 - 86

Опубликована: Ноя. 2, 2023

Язык: Английский

Процитировано

58

Integrated interface configuration by in-situ interface chemistry enabling uniform lithium deposition in all-solid-state lithium metal batteries DOI

Yu‐Long Liao,

Jiang‐Kui Hu,

Zhongheng Fu

и другие.

Journal of Energy Chemistry, Год журнала: 2023, Номер 80, С. 458 - 465

Опубликована: Фев. 16, 2023

Язык: Английский

Процитировано

56

Atomic-scale origin of the low grain-boundary resistance in perovskite solid electrolyte Li0.375Sr0.4375Ta0.75Zr0.25O3 DOI Creative Commons
Tom Lee, Ji Qi, Chaitanya Gadre

и другие.

Nature Communications, Год журнала: 2023, Номер 14(1)

Опубликована: Апрель 6, 2023

Oxide solid electrolytes (OSEs) have the potential to achieve improved safety and energy density for lithium-ion batteries, but their high grain-boundary (GB) resistance is a general bottleneck. In most well studied perovskite OSE, Li3xLa2/3-xTiO3 (LLTO), ionic conductivity of GBs about three orders magnitude lower than that bulk. contrast, related Li0.375Sr0.4375Ta0.75Zr0.25O3 (LSTZ0.75) exhibits low GB reasons yet unknown. Here, we used aberration-corrected scanning transmission electron microscopy spectroscopy, along with an active learning moment tensor potential, reveal atomic scale structure composition LSTZ0.75 GBs. Vibrational loss spectroscopy applied first time characterize otherwise unmeasurable Li distribution in LSTZ0.75. We found depletion, which major reason LLTO, absent Instead, resistivity attributed formation unique defective cubic interfacial contained abundant vacancies. Our study provides insights into mechanisms sheds light on possible paths designing OSEs total conductivity.

Язык: Английский

Процитировано

51

Heterojunction‐Accelerating Lithium Salt Dissociation in Polymer Solid Electrolytes DOI Open Access

Junbao Kang,

Nanping Deng,

Dongjie Shi

и другие.

Advanced Functional Materials, Год журнала: 2023, Номер 33(50)

Опубликована: Сен. 7, 2023

Abstract The practical application of solid‐state lithium‐metal batteries (SSLMBs) based on polymer solid electrolytes has been hampered by their low ion conductivity and lithium‐dendrite‐induced short circuits. This study innovatively introduces 1D ferroelectric ceramic‐based Bi 4 Ti 3 O 12 ‐BiOBr heterojunction nanofibers (BIT‐BOB HNFs) into poly(ethylene oxide) (PEO) matrix, constructing lithium‐ion conduction highways with “dissociators” “accelerating regions.” BIT‐BOB HNFs, as ceramic fillers, not only can construct long‐range organic/inorganic interfaces transport pathways, but also install regions” for these pathways through the electric dipole layer built‐in field promoting dissociation lithium salts transfer ions. working mechanisms HNFs in matrix are verified experimental tests density functional theory calculations. obtained composite exhibit excellent migration number (6.67 × 10 −4 S cm −1 0.54 at 50 °C, respectively). assembled symmetric battery achieves good cycling stability over 4500 h. LiFePO ||Li full delivers a high Coulombic efficiency (>99.9%) discharge capacity retention rate (>87%) after 2200 cycles. In addition, prepared electrolyte demonstrates potential flexible pouch batteries.

Язык: Английский

Процитировано

46

Advancements and Challenges in Solid-State Battery Technology: An In-Depth Review of Solid Electrolytes and Anode Innovations DOI Creative Commons
Abniel Machín, Carmen Morant, Francisco Márquez

и другие.

Batteries, Год журнала: 2024, Номер 10(1), С. 29 - 29

Опубликована: Янв. 17, 2024

The primary goal of this review is to provide a comprehensive overview the state-of-the-art in solid-state batteries (SSBs), with focus on recent advancements solid electrolytes and anodes. paper begins background evolution from liquid electrolyte lithium-ion advanced SSBs, highlighting their enhanced safety energy density. It addresses increasing demand for efficient, safe storage applications like electric vehicles portable electronics. A major part analyzes electrolytes, key SSB technology. classifies as polymer-based, oxide-based, sulfide-based, discussing distinct properties application suitability. also covers anode materials exploring lithium metal, silicon, intermetallic compounds, focusing capacity, durability, compatibility electrolytes. challenges integrating these materials, interface stability dendrite growth. This includes discussion latest analytical techniques, experimental studies, computational models understand improve anode–solid interface. These are crucial tackling interfacial resistance ensuring SSBs’ long-term efficiency. Concluding, suggests future research development directions, potential revolutionizing technologies. serves vital resource academics, researchers, industry professionals battery technology development. offers detailed technologies shaping future, providing insights into current solutions rapidly evolving field.

Язык: Английский

Процитировано

42

Advances in Sulfide Solid–State Electrolytes for Lithium Batteries DOI

Mingxuan Yao,

Jiangtao Shi, Aiyun Luo

и другие.

Energy storage materials, Год журнала: 2025, Номер unknown, С. 104018 - 104018

Опубликована: Янв. 1, 2025

Язык: Английский

Процитировано

3

Expediting solid electrolyte synthesis: Microwave-assisted wet synthesis of halogen-rich Li-argyrodite DOI

Suk‐Ho Hwang,

Seung‐Deok Seo, Do Hyun Kim

и другие.

Journal of Energy Chemistry, Год журнала: 2025, Номер unknown

Опубликована: Янв. 1, 2025

Язык: Английский

Процитировано

3

3D flame-retardant skeleton reinforced polymer electrolyte for solid-state dendrite-free lithium metal batteries DOI
Xiaojiao Zheng, Jiawei Wu, Jing Chen

и другие.

Journal of Energy Chemistry, Год журнала: 2022, Номер 71, С. 174 - 181

Опубликована: Март 15, 2022

Язык: Английский

Процитировано

47