Influence of high current pulsed electron beam irradiation on the microstructure and mechanical properties of nanolayered-TiN/AlSiN coatings DOI
Fuyang Cao, Jiayi Xie, Mingming Zhang

и другие.

Surface and Coatings Technology, Год журнала: 2024, Номер unknown, С. 131695 - 131695

Опубликована: Дек. 1, 2024

Язык: Английский

Cleaning Strategies of Synthesized Bioactive Coatings by PEO on Ti-6Al-4V Alloys of Organic Contaminations DOI Open Access
Avital Schwartz, Alexey Kossenko, Michael Zinigrad

и другие.

Materials, Год журнала: 2023, Номер 16(13), С. 4624 - 4624

Опубликована: Июнь 27, 2023

The effect of various cleaning methods on coating morphology and their effectiveness in removing organic contaminants has been studied this research. Bioactive coatings containing titanium oxides hydroxyapatite (HAP) were obtained through plasma electrolytic oxidation aqueous electrolytes molten salts. procedure for the coated surface was performed using autoclave (A), ultraviolet light (UV), radio frequency (RF), air (P), UV-ozone cleaner (O). samples characterized scanning electron microscopy (SEM) with an EDS detector, X-ray photoelectron spectroscopy (XPS), phase analysis (XRD), contact angle (CA) measurements. conducted studies revealed that from salt exhibited a finer crystalline structure (275 nm) compared to those (350 nm). After applying methods, carbon content decreased 5.21 at.% 0.11 which directly corresponds reduction contaminations decrease as follows: A > UV P O. This holds true both (25.3° 19.5° 10.5° 7.5°) (35.2° 28.3° 26.1° 16.6°). most effective moderate method is ozone treatment.

Язык: Английский

Процитировано

33

Structural and corrosion analysis of copper/chitosan coating on nanotubular TiO2/Ti6Al4V implant surface DOI
Konduru Ashok Kumar Raju, Amit Biswas

Surface and Coatings Technology, Год журнала: 2024, Номер 482, С. 130673 - 130673

Опубликована: Март 22, 2024

Язык: Английский

Процитировано

10

Synthesis of Titanium Oxide Nanotubes Loaded with Hydroxyapatite DOI Creative Commons

Elinor Zadkani Nahum,

Alex Lugovskoy, Svetlana Lugovskoy

и другие.

Nanomaterials, Год журнала: 2023, Номер 13(20), С. 2743 - 2743

Опубликована: Окт. 11, 2023

A simple method of synthesis TiO2 nanotubes (TiNT) loaded with hydroxyapatite (HAP) is described. Such find wide applications in various fields, including biomedicine, solar cells, and drug delivery, due to their bioactivity potential for osseointegration. The Cp-Ti substrate was anodized at a constant voltage 40 V, the subsequent heat treatment 450 °C. resulting TiNT had diameter 100.3 ± 2.8 nm length 3.5 0.04 μm. best result growth rate HAP Hanks’ balanced salt solution (Hanks’ BSS) obtained calcium glycerophosphate (CG = 0.1 g/L) when precipitates formed on bottom walls nanotubes. Structural properties, surface wettability, corrosion resistance, as an indicator coating have been studied. X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), potentiodynamic polarization test (PPC), electrochemical impedance (EIS), contact angle (CA) measurements were used characterize HAP-loaded (HAP-TiNT). CA, also serving indirect bioactivity, 30.4 1.1° not containing HAP. value HAP-TiNT produced g/L CG 18.2 1.2°, exposed BSS 7 days, CA 7.2 0.5°. studies measurement rates after 7-day exposure confirmed that processed exhibited most significant capacity formation compared other tested samples.

Язык: Английский

Процитировано

23

Engineering Bioactive MWCNT-Reinforced Hydroxyapatite Coatings on Ti29Nb5Zr Alloy by Plasma Electrolytic Oxidation method: A Comprehensive Approach to Dental Implant Surface Optimization DOI

M. Logesh,

Nguyen Khanh Toan, Sang‐Gun Ahn

и другие.

Journal of Alloys and Compounds, Год журнала: 2024, Номер 1006, С. 176339 - 176339

Опубликована: Сен. 4, 2024

Язык: Английский

Процитировано

8

Synthesis, characterization and superior corrosion prevention ability of novel polyaniline-gum rosin composites DOI

Sobia Yaseen,

Rizwan Ullah,

Zahid Ali Ghazi

и другие.

Surface and Coatings Technology, Год журнала: 2024, Номер 481, С. 130589 - 130589

Опубликована: Фев. 29, 2024

Язык: Английский

Процитировано

6

Durable slippery liquid-infused porous surfaces for effective corrosion protection of aluminum alloy in ethylene glycol-water solutions DOI
Zhongxu Lian, Xiaoguang Li,

Jinkai Xu

и другие.

Surface and Coatings Technology, Год журнала: 2024, Номер 484, С. 130850 - 130850

Опубликована: Май 1, 2024

Язык: Английский

Процитировано

6

Surface Properties of Ti65Zr Alloy Modified with TiZr Oxide and Hydroxyapatite DOI Creative Commons

Elinor Zadkani Nahum,

Alex Lugovskoy, Svetlana Lugovskoy

и другие.

Nanomaterials, Год журнала: 2023, Номер 14(1), С. 15 - 15

Опубликована: Дек. 20, 2023

Titanium-zirconium dioxide nanostructures loaded by hydroxyapatite were produced on the surface of Ti65Zr alloy. The alloy was treated anodization with subsequent immersion in calcium glycerophosphate (CG) solutions. resulting surfaces present TiO2-ZrO2 nanotubular (TiZr-NT) structures enriched (HAP). nanotube texture is expected to enhance surface’s corrosion resistance and promote integration bone tissue dental implants. TiZr-NT structure had a diameter 73 ± 2.2 nm length 10.1 0.5 μm. most favorable result for growth HAP Hanks’ balanced salt solution (Hanks’ BSS) obtained at CG concentration g/L. Samples soaked g/L demonstrated decrease contact angles 25.2°; after 3 days exposure BSS, further reduced 18.5°. studies also showed that = exhibited best stability.

Язык: Английский

Процитировано

11

Effect of Ultrasonic Vibration on Microstructure and Antifouling Capability of Cu-Modified TiO2 Coating Produced by Micro-Arc Oxidation DOI Open Access
Pengfei Hu, Liyang Zhu,

Jiejun Liu

и другие.

Coatings, Год журнала: 2024, Номер 14(4), С. 376 - 376

Опубликована: Март 22, 2024

Ti and its alloys have received wide attention in marine engineering. However, the limited anti-biofouling capability may hinder their application. In present work, micro-arc oxidation (MAO) with without introduction of ultrasonic vibration (UV) has been conducted on metallic substrate an aqueous solution containing Na2Cu-EDTA to produce a Cu-modified TiO2 coating. Microstructural characterization reveals that UV increased thickness coating (ranging from ~13.5 μm ~26.2 μm) compared ~8.1 ~12.8 UV. A relatively higher Cu content (~2.13 wt.%) relative (~1.39 indicates enhances incorporation into TiO2. Further, both electrochemical properties response sulfate-reducing bacteria (SRB) were evaluated, revealing endows enhanced corrosion resistance antifouling capability. The results suggest ultrasound-auxiliary (UMAO) obviously surface performance for promising applications

Язык: Английский

Процитировано

4

Effects of Surface Treatment Method Forming New Nano/Micro Hierarchical Structures on Attachment and Proliferation of Osteoblast-like Cells DOI Open Access
Jae-Seung Im, Hyunsuk Choi, Hyun‐Wook An

и другие.

Materials, Год журнала: 2023, Номер 16(16), С. 5717 - 5717

Опубликована: Авг. 21, 2023

Titanium (Ti) and Ti-based alloys are commonly used in dental implants, surface modifications of implants important for achieving osseointegration (i.e., direct connection between the implant bone). This study investigated effect an eco-friendly etching solution-a hydrogen peroxide-sodium bicarbonate mixture-on properties contact angles osteoblast adhesion proliferation on Ti surfaces. Disk-shaped specimens were prepared using different treatments (machining, sandblasting, sandblasting/acid-etching), they immersed solution ultrasonically cleaned. Surface characterization was performed scanning electron microscopy, digital angle analysis, X-ray photoelectron spectroscopy. MG-63 osteoblasts cultured specimens, their to specimen examined staining MTT assay, respectively. Additional with caused formation nano/micro hierarchical structures, increased roughness, enhanced hydrophilicity. Osteoblast found improve modified The method has potential enhance biological surfaces thereby performance.

Язык: Английский

Процитировано

9

Microstructure, wear, and corrosion performance of spherical cast tungsten carbide reinforced stainless steel-based composites manufactured by plasma transferred arc techniques DOI
Yiqi Zhou,

Yikun Liu,

Zhiyuan Huang

и другие.

Vacuum, Год журнала: 2024, Номер 233, С. 114003 - 114003

Опубликована: Дек. 31, 2024

Язык: Английский

Процитировано

3