Physicochemical vs Electrochemical Technologies for Metal Recovery – Main Insights, Comparison, Complementarity and Challenges DOI Open Access
Stefanos Mourdikoudis, Xochitl Domínguez-Benetton

Chemistry - Methods, Год журнала: 2025, Номер unknown

Опубликована: Фев. 3, 2025

Abstract The quest toward the development of new, more eco‐friendly removal/recycling/recovery methods for a range valuable elements is intense nowadays. In this Review we present and discuss in critical way best available physicochemical processes versus modern electrochemical approaches metal recovery which form part spent catalysts or other sources such as wastewater, mining waste batteries. These techniques include coagulation/flocculation, precipitation, electrocoagulation/electroflotation, membrane electrolysis, electrodeposition/electrowinning gas‐diffusion electrocrystallization (GDEx). Several key performance indicators (KPIs) are utilized to facilitate analysis different methods. Such have do, example, with efficiency, cost, complexity, environmental friendliness used. some cases, recovered metals can be further used specific applications, including fabrication electrocatalysts reactions interest. When possible, novel electrified technologies benchmarked state‐of‐the art approaches. This manuscript helps summarize all types comparative manner. targeted cannot by any explored, its removal also considered satisfactory extent, especially if element under discussion poses risk toxicity environment human health. Recovery sometimes combined an optimum effect, exploiting advantages each approach mitigating their drawbacks. Our review provides examples ‘removal‐only’ possibilities studied methods, though primary focus aiming reuse possible scenarios.

Язык: Английский

Synthesis of activated biochar from sustainable bamboo resources: An environment-friendly and low-cost solution for palladium (II) removal from wastewater DOI
Yennam Rajesh,

Santhi Raju Pilli,

Wahid Ali

и другие.

Chemosphere, Год журнала: 2023, Номер 341, С. 139944 - 139944

Опубликована: Авг. 26, 2023

Язык: Английский

Процитировано

14
Prenatal double-hit with aluminium and cadmium mediate testicular atrophy and hypothalamic hypoplasia: the role of oxido-nitrergic stress and endocrine perturbations DOI
Emmanuel Okhue, Helen Ejiro Kadiri, Patrick Chukwuyenum Ichipi-Ifukor

и другие.

BioMetals, Год журнала: 2024, Номер 37(2), С. 477 - 494

Опубликована: Янв. 8, 2024

Язык: Английский

Процитировано

5
Adsorptive removal of heavy metal ions from model aqueous media using titanium metal-organic framework and its polyvinyl chloride functionalized composite DOI Creative Commons
Abdul Naeem,

Naila Masood,

Tooba Saeed

и другие.

Desalination and Water Treatment, Год журнала: 2024, Номер 317, С. 100228 - 100228

Опубликована: Янв. 1, 2024

The present study was conducted on Ti-MOF and its PVC functionalized composite with the objective of toxic heavy metal ions removal from aqueous media. For achieving this purpose, solvothermal method used to synthesis which then for synthesis. synthesized adsorbent materials were analyzed via different techniques that include FTIR, XRD, SEM EDX analysis along TGA point zero charge (PZC). Batch experiments nickel (Ni) copper (Cu) sorption water, using adsorbents, under experimental conditions like initial concentration, pH, adsorbent's dosage, time contact temperature. by adsorbents increased increasing media dosage concentration. Whereas, pH system, pH-2 pH-10, also enhanced phenomenon, because pronounced forces attraction between positively charged adsorbate negatively surface, accompanied precipitation at a much higher pH. It observed adsorption surface greater than parent MOF material availability number sites, capacity Ni 6.436 29.2 mg/g Cu 21.414 41.616 mg/g. In addition, found have affinity towards as compared ions, is attributed smaller size ions. To determine mechanism, various isotherms examined. results concluded Langmuir isotherm suitable model explain mechanism.Moreover, thermodynamic parameters Gibbs free energy (ΔGo), change in enthalpyΔH, entropyΔS, determined. process be more spontaneous lower temperatures, exothermic nature adsorption, case endothermic ions.Also, negative value ΔS accounts decreased disorderliness system opposite tothat onto Ti-PVC composite.The thus an effective, durable, environmentally friendly adsorbent, wastewater.

Язык: Английский

Процитировано

5
Fabrication of a poly(m‑aminophenol)/3-aminopropyl triethoxysilane/graphene oxide ternary nanocomposite for removal of Cu(II) from aqueous solution DOI Creative Commons
Abeer S. Elsherbiny, Mohamed E. El-Halwagy, Ali H. Gemeay

и другие.

Scientific Reports, Год журнала: 2025, Номер 15(1)

Опубликована: Янв. 27, 2025

Язык: Английский

Процитировано

0
Physicochemical vs Electrochemical Technologies for Metal Recovery – Main Insights, Comparison, Complementarity and Challenges DOI Open Access
Stefanos Mourdikoudis, Xochitl Domínguez-Benetton

Chemistry - Methods, Год журнала: 2025, Номер unknown

Опубликована: Фев. 3, 2025

Abstract The quest toward the development of new, more eco‐friendly removal/recycling/recovery methods for a range valuable elements is intense nowadays. In this Review we present and discuss in critical way best available physicochemical processes versus modern electrochemical approaches metal recovery which form part spent catalysts or other sources such as wastewater, mining waste batteries. These techniques include coagulation/flocculation, precipitation, electrocoagulation/electroflotation, membrane electrolysis, electrodeposition/electrowinning gas‐diffusion electrocrystallization (GDEx). Several key performance indicators (KPIs) are utilized to facilitate analysis different methods. Such have do, example, with efficiency, cost, complexity, environmental friendliness used. some cases, recovered metals can be further used specific applications, including fabrication electrocatalysts reactions interest. When possible, novel electrified technologies benchmarked state‐of‐the art approaches. This manuscript helps summarize all types comparative manner. targeted cannot by any explored, its removal also considered satisfactory extent, especially if element under discussion poses risk toxicity environment human health. Recovery sometimes combined an optimum effect, exploiting advantages each approach mitigating their drawbacks. Our review provides examples ‘removal‐only’ possibilities studied methods, though primary focus aiming reuse possible scenarios.

Язык: Английский

Процитировано

0