Regulating Desolvation Activation Energy and Zn Deposition via a CTAB-Intercalated Mg–Al-Layered Double-Hydroxide Protective Layer for Durable Zn Metal Anodes DOI

Shenteng Wan,

Zengwei Pang,

Yao Tong

et al.

ACS Applied Materials & Interfaces, Journal Year: 2024, Volume and Issue: 16(27), P. 34923 - 34935

Published: June 27, 2024

While aqueous Zn-ion batteries (AZIBs) are widely considered as a promising energy storage system due to their merits of low cost, high specific capacity, and safety, the practical implementation has been hindered by Zn dendrite growth undesirable parasitic reactions. To address these issues, unique hydrophobic-ion-conducting cetyltrimethylammonium bromide-intercalated Mg-Al-layered double-hydroxide protective layer was constructed on anode (OMALDH-Zn) modulate nucleation behavior desolvation process. The hydrophobic cetyl group long chain can inhibit hydrogen evolution reaction corrosion repelling water molecules from surface reducing activation energy. Meanwhile, Mg-Al LDH with abundant zincophilic active sites Zn2+ ion flux, enabling dendrite-free deposition. Benefiting this interfacial synergy, cycle life (>2300 h) stable overpotential (<18 mV at 1 mA cm-2) excellent Coulombic efficiency (99.4%) for symmetrical asymmetrical were achieved. More impressively, rate performance cyclic stability have realized OMALDH-Zn//MnO2 in both coin-type pouch-type devices. This low-cost, simple, high-efficiency coordinated modulation method provides reliable strategy application AZIBs.

Language: Английский

Reconstruction of zinc-metal battery solvation structures operating from −50 ~ +100 °C DOI Creative Commons

Lingbo Yao,

Jiahe Liu, Feifan Zhang

et al.

Nature Communications, Journal Year: 2024, Volume and Issue: 15(1)

Published: July 24, 2024

Serious solvation effect of zinc ions has been considered as the cause severe side reactions (hydrogen evolution, passivation, dendrites, and etc.) aqueous metal batteries. Even though regulation cationic structure widely studied, effects anionic structures on were rarely examined. Herein, co-reconstruction was realized through constructing a new multi-component electrolyte (Zn(BF

Language: Английский

Citations

25

An Ultrahigh‐Modulus Hydrogel Electrolyte for Dendrite‐Free Zinc Ion Batteries DOI Open Access
Zong‐Ju Chen, Tianyu Shen, Xiong Xiao

et al.

Advanced Materials, Journal Year: 2024, Volume and Issue: unknown

Published: Nov. 14, 2024

Abstract Quasi‐solid‐state aqueous zinc ion batteries suffer from anodic dendrite growth during plating/stripping processes, impeding their commercial application. The inhibition of dendrites by high‐modulus electrolytes has been proven to be effective. However, hydrogel are difficult achieve high modulus owing inherent water contents. This work reports a electrolyte with ultrahigh that can overcome the stress through mechanical suppression effect. By combining wet‐annealing, solvent‐exchange, and salting‐out processes tuning hydrophobic crystalline domains, is obtained substantial content (≈70%), (198.5 MPa), toughness (274.3 MJ m −3 ), zinc‐ion conductivity (28.9 mS cm −1 which significantly outperforms previously reported poly(vinyl alcohol)‐based hydrogels. As result, exhibits excellent dendrite‐suppression effect achieves stable performance in Zn||Zn symmetric (1800 h cycle life at 1 mA −2 ). Moreover, Zn||V 2 O 5 pouch display cycling operate stably even under extreme conditions, such as large bending angle (180°) automotive crushing. provides promising approach for designing mechanically reliable advanced batteries.

Language: Английский

Citations

22

A Chemical Sewing Enabled All‐In‐One Control Interface for Robust Zinc Metal Anodes DOI
Wei Huang, Dongliang Yan, Qingning Li

et al.

Advanced Functional Materials, Journal Year: 2024, Volume and Issue: unknown

Published: April 25, 2024

Abstract Developing artificial protective layers is an effective strategy to address the issue of dendrites for aqueous Zn‐metal batteries (ZMBS). However, drawbacks such as rough microscopic morphology, excessive thickness, and single functionality remain, limiting attainment a stable zinc anode. Herein, novel multifunctional organic–inorganic hybrid layer produced by splicing inorganic fragments onto organic materials in situ using chemical sewing. The well‐compatible also retains function materials, which not only inhibits dendrite production but alleviates Zn corrosion. Si─OH bond zincophilic group enables planar deposition while forming hydrogen bonds with water, suppressing water activity near anode reducing evolution reaction. As expected, Zn||Zn symmetric cell provides high cycling stability more than 1960 h at 1 mA cm −2 , about 28 times higher that assembled without layer. More importantly, Zn||V 2 O 5 full ultra‐long lifetime has been achieved This work potential viable path achieve long‐lived ZMBS.

Language: Английский

Citations

20

Advances in application of sustainable lignocellulosic materials for high-performance aqueous zinc-ion batteries DOI
Yi Huang, Wei Liu, Chenxiao Lin

et al.

Nano Energy, Journal Year: 2024, Volume and Issue: 123, P. 109416 - 109416

Published: Feb. 22, 2024

Language: Английский

Citations

18

Accelerating Desolvation Process and Achieving Dendrite‐Free Zn Anode Via Dielectric Filler‐assisted Artificial Hybrid Interphase DOI Open Access
Canglong Li, Jie Huang, Dong‐Ping Chen

et al.

Advanced Sustainable Systems, Journal Year: 2025, Volume and Issue: unknown

Published: Feb. 2, 2025

Abstract Aqueous zinc‐ion batteries (AZIBs) have garnered significant interest for their potential in large‐scale energy storage, attributed to high safety and low cost. Nonetheless, issues such as limited cycling lifespan coulombic efficiency (CE) associated with dendrite formation uncontrollable side reactions on the Zn metal anode pose challenges that restrict practical applications. Herein, a dielectric filler‐assisted artificial hybrid interphase is constructed surface address faced by aqueous electrolytes. TiO 2 nanoparticles special properties promote solvation process carboxymethyl cellulose (CMC) acts physical barrier suppressing adverse blocking dendrite. Consequently, symmetric cell using modified zinc achieves prolonged cycle life of over 2500 h at 1 mAh cm −2 . Furthermore, full vanadium‐based cathode delivers excellent electrochemical performance (over 600 cycles A g −1 ). This research offers an efficient scalable approach enhance anodes.

Language: Английский

Citations

4

Polymer gels for aqueous metal batteries DOI
Tianfu Zhang, Keliang Wang,

Hengwei Wang

et al.

Progress in Materials Science, Journal Year: 2025, Volume and Issue: unknown, P. 101426 - 101426

Published: Jan. 1, 2025

Citations

3

Built‐In Trimodal Molecular Interaction Effect Enables Interface‐Compatible and Temperature‐Tolerance Aqueous Zinc Batteries DOI
Qiuting Chen,

Kefeng Ouyang,

Yanyi Wang

et al.

Advanced Functional Materials, Journal Year: 2024, Volume and Issue: unknown

Published: July 8, 2024

Abstract Aqueous zinc‐ion batteries compatible with a wide temperature range and long cycle lifespan show great application prospects but are greatly limited by the unstable electrode‐electrolyte interfaces mismatched electrolytes. This report presents pathway of succinamic acid (SA) additive‐induced built‐in trimodal molecular interaction for constructing sustainable aqueous zinc batteries. As confirmed, such falls into following patterns: binding state H─F bond between SA polyvinylidene fluoride (PVDF) binder, micellar aggregation in electrolyte, spontaneous adsorption at Zn anode–electrolyte interface. Benefiting from above synergistic effect, electrode shows highly reversible deposition/stripping behavior over (−10–50 °C) when paired optimized electrolyte. Specially, an impressive 3530 h‐cycle symmetrical cell is achieved conditions 1 mA cm −2 mAh . Beyond that, significantly improved storage capability performance demonstrated both Zn‐MnO 2 Zn‐I Given good balance working range, ionic conductivity, 2+ transfer number this trace molecule‐mediated design paradigm provides new insights developing advanced batteries, including not to zinc‐based systems.

Language: Английский

Citations

12

Improving Zn2+ migration via designing multiple zincophilic polymer electrolyte for advanced aqueous zinc ion batteries DOI
Lei Zhang, Jiawei Wu,

Tiantian Lu

et al.

Chemical Engineering Journal, Journal Year: 2024, Volume and Issue: 496, P. 153815 - 153815

Published: July 17, 2024

Language: Английский

Citations

10

Performance optimization of zinc-air batteries via nanomaterials DOI
Pengfei Zhang, Manhui Wei, Keliang Wang

et al.

Energy storage materials, Journal Year: 2025, Volume and Issue: 75, P. 104109 - 104109

Published: Feb. 1, 2025

Language: Английский

Citations

2

Regulating Zn2+ solvation structure in eutectic electrolytes for rechargeable zinc batteries DOI
Jingyun Jiang, Yu Chen, Yuanjian Li

et al.

Matter, Journal Year: 2025, Volume and Issue: 8(2), P. 101917 - 101917

Published: Feb. 1, 2025

Language: Английский

Citations

1