Lithiated Graphene Current Collector for Stable Anode‐Free and Anode‐Less Lithium Metal Batteries DOI

Yi Ping Zheng,

Xun Jian Hu,

Xiao Ming Xu

et al.

Batteries & Supercaps, Journal Year: 2024, Volume and Issue: unknown

Published: June 4, 2024

Abstract Anode‐free and anode‐less lithium (Li) metal batteries provide cell safety afford maximum energy density. However, their practical applications are hampered by poor cycling performances. In this study, a composite of LiC 6 phase in highly reduced graphene (HrGO, LC‐HrGO) is proposed as current collector for Li plating. LC‐HrGO provided homogenous plating sites favorable conductivity, which facilitated with nucleation barrier. The not easily delithiated, the HrGO lithiated. obtained anode‐free based on showed capacity retention 60 % after 100 cycles, corresponding indicated stable specific 134.5 mAh g −1 250 cycles remarkable rate 130.1 mA h at 5 C. work provides valuable concepts fabricating promising collectors towards beyond high‐level services.

Language: Английский

Magnesium fluoride-engineered UiO-66 artificial protection layers for dendrite-free lithium metal batteries DOI
K. I. Jang, Hee Jo Song, Jung Been Park

et al.

Energy & Environmental Science, Journal Year: 2024, Volume and Issue: 17(13), P. 4622 - 4633

Published: Jan. 1, 2024

The MgF 2 and F-terminated groups effectively infiltrated the ion transport channels within UiO-66, thereby regulating desolvation process facilitating rapid Li + kinetics.

Language: Английский

Citations

22

Interfacial Catalysis Strategy for High‐Performance Solid‐State Lithium Metal Batteries DOI
Yang Li, Hong Zhang, Hantao Xu

et al.

Advanced Energy Materials, Journal Year: 2024, Volume and Issue: 14(39)

Published: July 14, 2024

Abstract Solid‐state lithium metal batteries (SSLMBs) with polymer electrolytes (SPEs) have attracted tremendous attention owing to their superior safety and high energy density. However, the unstable solid electrolyte interphase (SEI) between Lithium (Li) SPEs hinders practical application. Herein, an innovative interfacial catalysis strategy is applied in situ construction of a multifunctional inorganic‐rich SEI. The transfer unpaired electrons adjacent calcium vacancies (V Ca ) TFSI − anion promotes breaking S─N C─F bonds during electrochemical decomposition , thus enhancing its kinetics. SEI derived from super‐stable kinetically favorable for fast homogeneous transport Li ions, thereby hindering growth dendrites. Consequently, endows Li||Li symmetric cells, LFP||Li NCM811||Li full enhanced cyclability. Thus, this work expands platform designing long‐life SSLMB.

Language: Английский

Citations

17

Hybrid conductive-lithophilic-fluoride triple protection interface engineering: Dendrite-free reverse lithium deposition for high-performance lithium metal batteries DOI
Huiying Li,

Chang Hong,

Runming Tao

et al.

Journal of Energy Chemistry, Journal Year: 2024, Volume and Issue: unknown

Published: Oct. 1, 2024

Language: Английский

Citations

7

In situ constructed dual-layer multifunctional lnterface through an acid-base coordination strategy enabling high performance garnet-type solid-state lithium metal batteries DOI

Lingchen Wang,

Cheng Ding, Ziyi Yu

et al.

Chemical Engineering Journal, Journal Year: 2025, Volume and Issue: unknown, P. 159915 - 159915

Published: Jan. 1, 2025

Language: Английский

Citations

1

Constructing stable interface and high-performance solid polymer electrolyte by introducing MgF2 for dendrite-free Li metal batteries DOI
Ying Jiang,

Xu Chu,

Jie Li

et al.

Journal of Energy Storage, Journal Year: 2025, Volume and Issue: 113, P. 115686 - 115686

Published: Feb. 6, 2025

Language: Английский

Citations

1

Ductile Inorganic Solid Electrolytes for All-Solid-State Lithium Batteries DOI
Tao Yu,

Yuankai Liu,

Haoyu Li

et al.

Chemical Reviews, Journal Year: 2025, Volume and Issue: unknown

Published: Feb. 11, 2025

Solid electrolytes, as the core of all-solid-state batteries (ASSBs), play a crucial role in determining kinetics ion transport and interface compatibility with cathodes anodes, which can be subdivided into catholytes, bulk anolytes based on their functional characteristics. Among various inorganic solid ductile distinguished from rigid oxide exhibit excellent properties even under cold pressing, thus holding greater promise for industrialization. However, challenge lies finding electrolyte that simultaneously serve catholyte, electrolyte, anolyte. Fortunately, due to immobility combining multiple types electrolytes allows leveraging respective advantages. In this review, we discuss five sulfides, halides, nitrides, antiperovskite-type, complex hydrides, challenges superiorities these are also addressed. The impact pressure ASSBs has been systematically discussed. Furthermore, suitability anolyte is discussed characteristics physicochemical properties. This discussion aims deepen our understanding enabling us harness advantages develop practical, high-performance ASSBs.

Language: Английский

Citations

1

Alleviating range anxiety: Solid-state batteries and extreme fast charging DOI
Yajie Song, Xue Sun, Shuaifeng Lou

et al.

Progress in Materials Science, Journal Year: 2024, Volume and Issue: 147, P. 101339 - 101339

Published: July 19, 2024

Language: Английский

Citations

6

Tailored Engineering on the Interface Between Lithium Metal Anode and Solid‐State Electrolytes DOI Creative Commons
Qi Zhou,

Xiaosong Xiong,

Jun Peng

et al.

Energy & environment materials, Journal Year: 2024, Volume and Issue: unknown

Published: Oct. 4, 2024

The replacement of non‐aqueous organic electrolytes with solid‐state (SSEs) in lithium metal batteries (SLMBs) is considered a promising strategy to address the constraints lithium‐ion batteries, especially terms energy density and reliability. Nevertheless, few SLMBs can deliver required cycling performance long‐term stability for practical use, primarily due suboptimal interface properties. Given diverse solidification pathways leading different characteristics, it crucial pinpoint source deterioration develop appropriate remedies. This review focuses on Li|SSE issues between anode SSE, discussing recent advancements understanding (electro)chemistry, impact defects, evolutions that vary among SSE species. state‐of‐the‐art strategies concerning modified SEI, artificial interlayer, surface architecture, composite structure are summarized delved into internal relationships characteristics enhancements. current challenges opportunities characterizing modifying suggested as potential directions achieving SLMBs.

Language: Английский

Citations

6

In situ Triggered Rich‐LiF/Mg Multifunctional Passivation Layer for Modifying the Anode Interface of All‐Solid‐State Lithium Metal Batteries DOI

Chengdeng Wang,

Jun Wu,

Jiamao Hao

et al.

Advanced Functional Materials, Journal Year: 2024, Volume and Issue: unknown

Published: Oct. 10, 2024

Abstract Lithium (Li) is a promising anode material for all‐solid‐state Li metal batteries (ASSLMBs) due to its high energy density. However, the interface incompatibility of Li/solid electrolyte and uneven deposition induces penetration dendrites. Herein, multifunctional rich‐LiF/Mg artificial solid interphase (SEI) layer constructed from MgF 2 ‐PVDF‐HFP film passivate achieve effective inhibition Notably, triggered x Mg alloys rivet 6 PS 5 Cl (LPSCl) together well, producing satisfactory contact reducing overpotential. The mechanism LiF enhance stability Li/LPSCl further elucidated by density functional theory (DFT). Moreover, synergistic interaction with interfacial low diffusion barrier promotes uniform during plating/stripping structural stability. Therefore, modified Li‐symmetric cell exhibits ultra‐high critical current (2.0 mA cm −2 ) considerable cyclic (more than 1000 h at 0.5 ). Remarkably, NCM//LPSCl//3% ‐PVDF‐HFP@Li ASSLMBs exhibit long‐term cycle (86.9% capacity retention after 100 cycles 0.2 C). This work highlights role intermediate passivating in mitigating side reactions preventing penetration.

Language: Английский

Citations

6

Intimate Protective Layer via Lithiation Sintering for All-Solid-State Lithium Metal Batteries DOI

G.G. Lee,

Dongkyu Lee, Seung Ho Choi

et al.

ACS Energy Letters, Journal Year: 2024, Volume and Issue: 9(8), P. 3807 - 3814

Published: July 12, 2024

Language: Английский

Citations

5