High Efficiency Non‐Halogenated Solvent Processed Organic Solar Cells Through Synergistic Effects of Layer‐by‐Layer and Solid Additive DOI
Hui Li, Longfei Liu,

Jiangkai Yu

et al.

Advanced Functional Materials, Journal Year: 2025, Volume and Issue: unknown

Published: April 24, 2025

Abstract In the field of organic solar cells (OSCs), bulk heterojunction (BHJ) structure is most widely used. On contrary, layer‐by‐layer (LBL) gives a p‐i‐n separation where donor close to transparent electrode while acceptor reflective electrode, which shows be an ideal for OSCs. this work, volatile solid additives 2,5‐dibromoprazine (DBP) and 2‐bromine‐5‐iodopyrazine (BIP) are introduced regulate morphology LBL active layers. Comprehensive analysis reveals that DBP BIP can promote stronger molecular packing crystallinity BTP‐eC9, resulting in higher charge mobility, more efficient separation, suppressed bimolecular recombination significantly improve device filling factor (FF), especially devices. Consequently, by combining engineering additive BIP, outstanding power conversion efficiency (PCE) 19.63% based on PM1/BTP‐eC9 achieved further applied PM1/BTP‐eC9:eC9‐2Cl ternary system, PCE exceeded 20%. The results provide comprehensive insights into synergistic effect high‐performance photovoltaics.

Language: Английский

Isomerization Engineering of Solid Additives Enables Highly Efficient Organic Solar Cells via Manipulating Molecular Stacking and Aggregation of Active Layer DOI
Yawei Miao, Yanna Sun,

Wentao Zou

et al.

Advanced Materials, Journal Year: 2024, Volume and Issue: 36(33)

Published: June 20, 2024

Morphology control is crucial in achieving high-performance organic solar cells (OSCs) and remains a major challenge the field of OSC. Solid additive an effective strategy to fine-tune morphology, however, mechanism underlying isomeric solid additives on blend morphology OSC performance still vague urgently requires further investigation. Herein, two based pyridazine or pyrimidine as core units, M1 M2, are designed synthesized explore working OSCs. The smaller steric hindrance larger dipole moment facilitate better π-π stacking aggregation M1-based active layer. M1-treated all-small-molecule OSCs (ASM OSCs) obtain impressive efficiency 17.57%, ranking among highest values for binary ASM OSCs, with 16.70% M2-treated counterparts. Moreover, it imperative investigate whether isomerization engineering works state-of-the-art polymer D18-Cl:PM6:L8-BO-based devices achieve exceptional 19.70% (certified 19.34%), work provides deep insights into design clarifies potential optimizing device through additives.

Language: Английский

Citations

34
Over 19.2% efficiency of layer-by-layer organic photovoltaics enabled by a highly crystalline material as an energy donor and nucleating agent DOI

Hongyue Tian,

Yuheng Ni,

Wenqing Zhang

et al.

Energy & Environmental Science, Journal Year: 2024, Volume and Issue: 17(14), P. 5173 - 5182

Published: Jan. 1, 2024

By introducing highly crystalline material D18A into donor layer acting as energy and nucleating agent, an optimal PCE of 19.25% was achieved for PM1 : D18A/L8-BO based OPVs.

Language: Английский

Citations

31
Precisely Controlling Polymer Acceptors with Weak Intramolecular Charge Transfer Effect and Superior Coplanarity for Efficient Indoor All‐Polymer Solar Cells with over 27% Efficiency DOI Creative Commons
Bosen Zou,

Ho Ming Ng,

Han Yu

et al.

Advanced Materials, Journal Year: 2024, Volume and Issue: 36(32)

Published: May 28, 2024

Abstract Indoor photovoltaics (IPVs) are garnering increasing attention from both the academic and industrial communities due to pressing demand of ecosystem Internet‐of‐Things. All‐polymer solar cells (all‐PSCs), emerging as a sub‐type organic photovoltaics, with merits great film‐forming properties, remarkable morphological light stability, hold promise simultaneously achieve high efficiency long‐term operation in IPV's application. However, dearth polymer acceptors medium‐bandgap has impeded rapid development indoor all‐PSCs. Herein, highly efficient acceptor (PYFO‐V) is reported through synergistic effects side chain engineering linkage modulation applied for all‐PSCs operation. As result, PM6:PYFO‐V‐based all‐PSC yields highest 27.1% under LED condition, marking value binary date. More importantly, blade‐coated devices using non‐halogenated solvent ( o ‐xylene) maintain an over 23%, demonstrating potential industry‐scale fabrication. This work not only highlights importance fine‐tuning intramolecular charge transfer effect intrachain coplanarity developing high‐performance but also provides strategy

Language: Английский

Citations

20
Cascaded Energy and Charge Transfer Synergistically Prompting 18.7% Efficiency of Layered Organic Solar Cells with 1.48 eV Bandgap DOI Open Access
Lu Zhang, Hang Zhou, Yongchao Xie

et al.

Advanced Energy Materials, Journal Year: 2025, Volume and Issue: unknown

Published: Jan. 2, 2025

Abstract Series of layer‐by‐layer organic solar cells (LOSCs) are constructed by sequentially spin‐coating donor layer and acceptor layers. A champion power conversion efficiency (PCE) 18.79% is achieved from the LOSCs with PBQx‐TCl/ITIC/PY‐DT as active layers, which should be one top values among OSCs optical bandgap over 1.48 eV. The middle material ITIC has a complementary photon harvesting range PBQx‐TCl PY‐DT, leading to enhanced Meanwhile, can play vital role in energy charge transfer relay increase exciton utilization transport, confirmed varied FFs normal or inverted ITIC/PY‐DT PY‐DT/ITIC Over 7% PCE improvement employing form cascaded This work may provide an efficient strategy for improving performance LOSCs.

Language: Английский

Citations

11
A dendritic hexamer acceptor enables 19.4% efficiency with exceptional stability in organic solar cells DOI Creative Commons
Tao Jia, Tao Lin, Yang Yang

et al.

Nature Communications, Journal Year: 2025, Volume and Issue: 16(1)

Published: Jan. 20, 2025

Language: Английский

Citations

3
Halogenated Dibenzo[f,h]quinoxaline Units Constructed 2D‐Conjugated Guest Acceptors for 19% Efficiency Organic Solar Cells DOI Creative Commons

Jingshun Gao,

Hairui Bai,

Ping Li

et al.

Advanced Science, Journal Year: 2024, Volume and Issue: 11(31)

Published: June 17, 2024

Abstract Halogenation of Y‐series small‐molecule acceptors (Y‐SMAs) is identified as an effective strategy to optimize photoelectric properties for achieving improved power‐conversion‐efficiencies (PCEs) in binary organic solar cells (OSCs). However, the effect different halogenation 2D‐structured large π‐fused core guest Y‐SMAs on ternary OSCs has not yet been systematically studied. Herein, four 2D‐conjugated (X‐QTP‐4F, including halogen‐free H‐QTP‐4F, chlorinated Cl‐QTP‐4F, brominated Br‐QTP‐4F, and iodinated I‐QTP‐4F) by attaching halogens into 2D‐conjugation extended dibenzo[ f , h ]quinoxaline are developed. Among these X‐QTP‐4F, Cl‐QTP‐4F a higher absorption coefficient, optimized molecular crystallinity packing, suitable cascade energy levels, complementary with PM6:L8‐BO host. Moreover, among PM6:L8‐BO:X‐QTP‐4F blends, PM6:L8‐BO:Cl‐QTP‐4F obtains more uniform size‐suitable fibrillary network morphology, well vertical phase distribution, thus boosting charge generation, transport, extraction, suppressing loss OSCs. Consequently, PM6:L8‐BO:Cl‐QTP‐4F‐based achieve 19.0% efficiency, which state‐of‐the‐art based superior devices host (17.70%) guests H‐QTP‐4F (18.23%), Br‐QTP‐4F (18.39%), I‐QTP‐4F (17.62%). The work indicates that promising gain efficient

Language: Английский

Citations

14
A Difluoro‐Methoxylated Ending‐Group Asymmetric Small Molecule Acceptor Lead Efficient Binary Organic Photovoltaic Blend DOI Creative Commons
Weiwei Wu, Bosen Zou, Ruijie Ma

et al.

Small, Journal Year: 2024, Volume and Issue: unknown

Published: May 16, 2024

Abstract Developing a new end group for synthesizing asymmetric small molecule acceptors (SMAs) is crucial achieving high‐performance organic photovoltaics (OPVs). Herein, an acceptor, BTP‐BO‐4FO, featuring difluoro‐methoxylated end‐group reported. Compared to its symmetric counterpart L8‐BO, BTP‐BO‐4FO exhibits upshifted energy level, larger dipole moment, and more sequential crystallinity. By adopting two representative widely available solvent additives (1‐chloronaphthalene (CN) 1,8‐diiodooctane (DIO)), the device based on PM6:BTP‐BO‐4FO photovoltaic blend demonstrates power conversion efficiency (PCE) of 18.62% with excellent open‐circuit voltage ( V OC ) 0.933 V, which surpasses optimal result L8‐BO. The PCE realizes best efficiencies binary OPVs SMAs groups. A series investigations reveal that optimized film similar molecular packing motif fibrillar phase distribution as PM6:L8‐BO (DIO) does, resulting in comparable recombination dynamics, thus, fill factor. Besides, it found possesses efficient charge generation, yields better – J SC balance. This study provides ending enables cutting‐edge SMA‐based OPVs, enriching material library shed light further design ideas.

Language: Английский

Citations

10
In-situ understanding on the formation of fibrillar morphology in green solvent processed all-polymer solar cells DOI Creative Commons
Ruijie Ma, Hongxiang Li, Top Archie Dela Peña

et al.

National Science Review, Journal Year: 2024, Volume and Issue: 11(12)

Published: Nov. 4, 2024

ABSTRACT Solid additive engineering has been intensively explored on morphology tuning for highly efficient all-polymer solar cells (all-PSCs), a promising photovoltaic technology towards multi-scenario application. Although the nano-fibrillar network of active layer induced by treatment is confirmed as key factor power conversion efficiency (PCE) all-PSCs, its formation mechanism not clearly revealed, lack precise and convincing real-time observation crystallization phase separation during liquid-to-solid transition process spin-coating. Herein we report an in-situ grazing incidence wide-angle/small-angle X-ray scattering (GIWAXS/GISAXS) screening that reveals fact naphthalene derived solid additives can suppress aggregation polymer acceptor (PY-IT) at beginning stage spin coating, which provides sufficient time space donor (PM6) to form fibril structure. Moreover, guided this knowledge, ternary system proposed, achieves cutting-edge level PCEs both small-area (0.04 cm2) (also decent operational stability) large-area (1 devices.

Language: Английский

Citations

10
Layered All‐Polymer Solar Cells with Efficiency of 18.34% by Employing Alloyed Polymer Donors DOI Open Access
Hang Zhou, Lu Zhang,

Hongyue Tian

et al.

Small, Journal Year: 2025, Volume and Issue: 21(11)

Published: Feb. 7, 2025

Abstract A series of layered all‐polymer solar cells (LA‐PSCs) with the normal or inverted structure are prepared by employing a sequential spin‐coating method PBQx‐TCl, PM1 as polymer donor, and PY‐DT acceptor. The power conversion efficiency (PCE) LA‐PSCs can be improved from 17.20% to 18.34% incorporating 30 wt.% into PBQx‐TCl layer, resulting simultaneously increased J SC 25.35 mA cm −2 , V OC 0.971 FF 74.49%. PCE improvement also achieved PBQx‐TCl:PM1 donor layers. mixed prefer form alloyed states in LA‐PSCs, which confirmed gradually s more content Meanwhile, photogenerated excitons layers dissociated at interface between PM1, especially for located near ITO electrode. exciton dissociation provide an additional channel improving utilization efficiency, positive external quantum spectral difference (∆EQE) values Over 6.6% realized using layer.

Language: Английский

Citations

2
A systematic investigation on pyridine derived solid additives inducing fibrillar morphology for highly efficient organic solar cells with over 20 % efficiency DOI Creative Commons
Kai Chen,

Weixu Duan,

Lang Zhou

et al.

Materials Science and Engineering R Reports, Journal Year: 2025, Volume and Issue: 164, P. 100977 - 100977

Published: March 18, 2025

Language: Английский

Citations

2