Recent Advances in Non‐Aqueous Liquid Electrolytes for High‐Voltage Sodium‐Ion Batteries DOI Creative Commons
Jing Ning, Min Zhou, Yujie Zhang

et al.

EcoEnergy, Journal Year: 2025, Volume and Issue: unknown

Published: May 21, 2025

ABSTRACT Sodium‐ion batteries are considered one of the most promising candidates for lithium‐ion batteries. Increasing charging voltage is an effective way to realize sodium‐ion with low cost and high energy density. However, narrow window existing electrolyte a serious constraint. This review systematically summarizes development electrolytes high‐voltage in recent years. Firstly, basic characteristics critical influencing factors presented. Secondly, strategies developing years summarized, including regulation solvation structure, applications new resistant solvents, action mechanism additives. Finally, future trend proposed, aiming promote breakthrough application density

Language: Английский

Bifunctional sodium tetrakis [3,5-bis(trifluoromethyl)phenyl] borate additive for long-lifespan sodium-ion batteries with NaNi0.33Fe0.33Mn0.33O2 cathode DOI
Ridong Hu,

Lewen Yang,

Caixia Zhang

et al.

Chemical Engineering Journal, Journal Year: 2025, Volume and Issue: unknown, P. 162144 - 162144

Published: April 1, 2025

Language: Английский

Citations

1

Electrolyte Engineering of Hard Carbon for Sodium‐Ion Batteries: From Mechanism Analysis to Design Strategies DOI

Keying Cui,

Ruilin Hou,

Haoshen Zhou

et al.

Advanced Functional Materials, Journal Year: 2024, Volume and Issue: unknown

Published: Dec. 4, 2024

Abstract The hard carbon (HC) anodes with desirable electrochemical performances including high initial Coulombic efficiency, superior rate performance and long‐term cycling play an indispensable role in the practical application of sodium ion batteries (SIBs), which are closely related to electrolytes them matched. Fully analyzing mechanism electrolyte engineering for HC is crucial promoting commercialization SIBs, but still lacking. In this review, correlation between physicochemical properties first summarized. And point out properties, conductivity, de‐solvation energy, interface passivation ability Na + storage HC. Then, formation process, composition, as well structure solid interphase (SEI) on surface mainly discussed, structure‐activity relationship SEI analyzed depth. Moreover, based analysis, relevant design strategies have been Finally, challenges future development directions proposed. This review expected provide professional theoretical guidance contribute rational high‐performance anodes, industrialization SIBs.

Language: Английский

Citations

6

Enhanced Sodium Storage and Thermal Safety of NaNi1/3Fe1/3Mn1/3O2 Cathode via Incorporation of TiN and WO3 DOI
Zhipeng Qin, Yingying Liu,

Yucan He

et al.

ACS Applied Materials & Interfaces, Journal Year: 2025, Volume and Issue: unknown

Published: Jan. 27, 2025

This study proposes an efficient, cost-effective, and industrially scalable electrode modulation strategy, which involves directly adding a small amount of high thermal conductance TiN well interface compatible WO3 to NaNi1/3Fe1/3Mn1/3O2 (NaNFMO-TW) cathode slurry, effectively reduce polarization side reactions, the Ohmic heat battery, ultimately significantly improve sodium-ion storage safety performance battery. At room temperature (RT) 1C rate, modified NaNFMO-TW exhibits reversible capacity ∼95 mAh g-1 after 300 cycles, with retention rate 82.6%, being higher than 50.7% for NaNFMO. Furthermore, assembled pouch battery retains 58.2% cycles at RT&0.5C, conspicuously superior 46.1% achieved by NaNFMO||HC In particular, adiabatic tests infrared imaging reveal marked improvement in reduction surface ∼1.3 ∼2.2 °C during 3C charging discharging, respectively. Moreover, results confirmed enhancement mechanism NaNFMO addition WO3. Such strategy provides practical method improving performance.

Language: Английский

Citations

0

Modulating Surface Oxygen Coordination to Achieve Suppressed Phase Transitions and Enhanced Cyclic Stability in Na0.67Mn0.5Fe0.5O2 Cathodes for High-Energy and Low-Cost Na-Ion Batteries DOI

Kang Wu,

Peilin Ran, Lunhua He

et al.

Inorganic Chemistry, Journal Year: 2025, Volume and Issue: unknown

Published: March 4, 2025

The layered iron manganese oxide cathodes accompanied by anionic redox reaction (ARR) activity show large promise of high-energy and economical sodium-ion batteries. However, the adverse surface oxygen lattice evolution caused irreversible ARR tends to lead poor cyclic stability severe voltage decay, which limits its commercial application. In this work, using Na0.67Mn0.5Fe0.5O2 (NMFO) as model compound, an optimization strategy modulating coordination through a simultaneous Li doping Li3PO4 coating is proposed achieve both triggered reversible processes. As revealed neutron diffraction techniques transmission electron microscopy tests, ions are successfully doped coated on NMFO cathode, respectively. optimized cathode expectedly shows not only enhanced specific capacity but also improved stability. excellent electrochemical properties ascribed suppressed detrimental P2-O2 phase transition, reversibility, thermal structural More broadly, work demonstrates feasibility activate stabilize ion-storage process.

Language: Английский

Citations

0

Special functionalized binder chemistry boosting high-rate and long-life sodium ion batteries DOI

J Liu,

Xiao Liu, Tao You

et al.

Chemical Engineering Journal, Journal Year: 2025, Volume and Issue: unknown, P. 161924 - 161924

Published: March 1, 2025

Language: Английский

Citations

0

Study on Thermal Behavior and Safety Properties of Na4Fe3(PO4)2(P2O7) and NaNi1/3Fe1/3Mn1/3O2 Cathode-Based Sodium Ion Battery DOI Creative Commons
Ranbo Yu, Shiyang Liu,

Xuehai Li

et al.

Batteries, Journal Year: 2025, Volume and Issue: 11(5), P. 184 - 184

Published: May 7, 2025

Sodium-ion batteries (SIBs) share similar working principles with lithium-ion while demonstrating cost advantages. However, the current understanding of their safety characteristics remains insufficient, and thermal runaway mechanisms different SIB systems have not been fully elucidated. This study investigated following two mainstream sodium-ion battery systems: polyanion-type compound (PAC) layered transition metal oxide (TMO) cathodes. Differential scanning calorimetry (DSC) was employed to evaluate stability cathodes anodes, examining effects state charge (SOC), cycling, overcharging on electrode stability. The electrolytes compositions also characterized analyzed. Additionally, adiabatic tests were conducted using an accelerating rate calorimeter (ARC) explore temperature–voltage evolution patterns temperature rise rates. systematically heat-generating reactions during various stages a comparative analysis between these systems.

Language: Английский

Citations

0

Constructing Dissolution–Resistant Interphases for Long‐Life Sodium‐Ion Batteries at Elevated Temperatures DOI Creative Commons
Wen‐Ting Deng, Xiaofan Du, Gaojie Xu

et al.

Advanced Science, Journal Year: 2025, Volume and Issue: unknown

Published: May 8, 2025

Abstract Rechargeable sodium‐ion batteries (SIBs) utilizing NaPF 6 ‐carbonate electrolytes consistently exhibit unsatisfactory cycle life at elevated temperatures, posing a significant challenge for their large‐scale commercialization. This is mainly caused by the instability of interphase layers especially high solubility components (especially NaF) in carbonate solvents. In this study, novel additive sodium difluorobis(oxalato) phosphate (NaDFBOP) synthesized and introduced into to enhance commercial SIBs composed NaNi 1/3 Fe Mn O 2 (NFM) cathode hard carbon (HC) anode, particularly 50 °C. Specifically, NaDFBOP enables NFM/HC retain 85.45% initial capacity after 1000 cycles 30 °C 90.76% 500 Theoretical calculations reveal that DFBOP⁻ anions enter first solvation shell Na + , exhibits strong propensity decomposition. Characterizations suggest favors formation dissolution–resistant robust enriched dissolution‐resistant oxalate‐containing species inorganic NaF, which have mutual binding energy. work underscores critical importance designing functional additives constructing interphases temperature SIBs.

Language: Английский

Citations

0

Engineering an Adaptive Inner Helmholtz Plane Enables High-Voltage Sodium-Ion Batteries DOI
Zhigao Chen, Ruxue Du, Chenyang Liu

et al.

ACS Energy Letters, Journal Year: 2025, Volume and Issue: unknown, P. 2689 - 2700

Published: May 10, 2025

Citations

0

Recent Advances in Non‐Aqueous Liquid Electrolytes for High‐Voltage Sodium‐Ion Batteries DOI Creative Commons
Jing Ning, Min Zhou, Yujie Zhang

et al.

EcoEnergy, Journal Year: 2025, Volume and Issue: unknown

Published: May 21, 2025

ABSTRACT Sodium‐ion batteries are considered one of the most promising candidates for lithium‐ion batteries. Increasing charging voltage is an effective way to realize sodium‐ion with low cost and high energy density. However, narrow window existing electrolyte a serious constraint. This review systematically summarizes development electrolytes high‐voltage in recent years. Firstly, basic characteristics critical influencing factors presented. Secondly, strategies developing years summarized, including regulation solvation structure, applications new resistant solvents, action mechanism additives. Finally, future trend proposed, aiming promote breakthrough application density

Language: Английский

Citations

0