Effect of matrix modification and fiber surface treatment on the properties of basalt fiber reinforced polypropylene composites DOI Creative Commons
K.V. Balaji, Kamyar Shirvanimoghaddam, Ramdayal Yadav

et al.

Hybrid Advances, Journal Year: 2024, Volume and Issue: 6, P. 100253 - 100253

Published: July 22, 2024

With a focus on sustainable natural fiber reinforced polypropylene composites in varied industries like automotive and aerospace, this study investigates the impact of matrix modification surface treatment basalt fibers thermomechanical properties heterophasic composites. Polypropylene was achieved by adding maleic anhydride grafted (PP-g-MA), resulting that exhibited 133 % improvement tensile strength 256 modulus at 30 weight compared to neat polypropylene. The short underwent silane treatment; However, thermal used strip default manufacturer's sizing resulted fluffy fibres texture, which led agglomeration feeding issues during processing. Although helped establish better fiber-matrix interphase, no significant observed. saw 343 as Resizing following recovery end-of-life stage composite would be challenging due nature fibers. Therefore, any should done initial manufacturing stage, later stages requires detailed study.

Language: Английский

Recent advances and perspectives of 1D/2D carbon materials for high-performance flexible zinc ion batteries DOI

Qingqing Zheng,

Zewei Hu, Liyang Liu

et al.

Journal of Materials Chemistry A, Journal Year: 2024, Volume and Issue: 12(33), P. 21531 - 21552

Published: Jan. 1, 2024

This review provides a summary of recent advancements in 1D/2D carbon materials (carbon nanotubes, graphene, MXenes, and fibers) for FZIBs. It mainly introduces the functions enhancing performance

Language: Английский

Citations

11
The synergy of the matrix modification and fiber geometry to enhance the thermo‐mechanical properties of basalt fiber‐polypropylene composites for automotive applications DOI Creative Commons
K.V. Balaji, Kamyar Shirvanimoghaddam, Ramdayal Yadav

et al.

Journal of Applied Polymer Science, Journal Year: 2024, Volume and Issue: 141(29)

Published: May 15, 2024

Abstract Basalt fiber reinforced polypropylene composites with two initial lengths (3.2 and 6.4 mm) were fabricated using twin‐screw extrusion compounding. In the case of smaller length, basalt fibers predominantly served as nucleating agents for thereby resulting in an increase degree crystallinity. The addition polypropylene‐g‐maleic anhydride (PP‐g‐MA) caused matrix to become amorphous, which was due establishment a fiber–matrix interphase. This behavior different relatively larger length especially at higher content. reduction decrease crystallinity, this hindered ability form crystals. Addition PP‐g‐MA established interphase synergistically contributing increased amorphousness mm length. Reduced processing also accelerated thermal degradation mm. However, resulted orientation, contributed improvement tensile flexural properties At 30% content, strength modulus modified improved by 18% 13% compared 3.2

Language: Английский

Citations

5
Emerging Trends in Smart and Sustainable Nano-Biosensing: The Role of Green Nanomaterials DOI Creative Commons
Shima Jafarzadeh, Nazila Oladzadabbasabadi, Mohammed Ali Dheyab

et al.

Industrial Crops and Products, Journal Year: 2024, Volume and Issue: 223, P. 120108 - 120108

Published: Nov. 26, 2024

Language: Английский

Citations

5
Effect of matrix modification and fiber surface treatment on the properties of basalt fiber reinforced polypropylene composites DOI Creative Commons
K.V. Balaji, Kamyar Shirvanimoghaddam, Ramdayal Yadav

et al.

Hybrid Advances, Journal Year: 2024, Volume and Issue: 6, P. 100253 - 100253

Published: July 22, 2024

With a focus on sustainable natural fiber reinforced polypropylene composites in varied industries like automotive and aerospace, this study investigates the impact of matrix modification surface treatment basalt fibers thermomechanical properties heterophasic composites. Polypropylene was achieved by adding maleic anhydride grafted (PP-g-MA), resulting that exhibited 133 % improvement tensile strength 256 modulus at 30 weight compared to neat polypropylene. The short underwent silane treatment; However, thermal used strip default manufacturer's sizing resulted fluffy fibres texture, which led agglomeration feeding issues during processing. Although helped establish better fiber-matrix interphase, no significant observed. saw 343 as Resizing following recovery end-of-life stage composite would be challenging due nature fibers. Therefore, any should done initial manufacturing stage, later stages requires detailed study.

Language: Английский

Citations

4