Investigation on the reactive transport characteristic of uranium-bearing sandstone during the in-situ leaching mining uranium DOI

Xuebin Su,

Junlin Mao,

Tong Zhang

et al.

Journal of Environmental Radioactivity, Journal Year: 2025, Volume and Issue: 284, P. 107654 - 107654

Published: March 3, 2025

Language: Английский

A review on the applications of nuclear magnetic resonance (NMR) in the oil and gas industry: laboratory and field-scale measurements DOI Creative Commons
Mahmoud Elsayed, Abubakar Isah, Moaz Hiba

et al.

Journal of Petroleum Exploration and Production Technology, Journal Year: 2022, Volume and Issue: 12(10), P. 2747 - 2784

Published: March 14, 2022

Abstract This review presents the latest update, applications, techniques of NMR tools in both laboratory and field scales oil gas upstream industry. The applications scale were thoroughly reviewed summarized such as porosity, pores size distribution, permeability, saturations, capillary pressure, wettability. is an emerging tool to evaluate improved recovery techniques, it was found be better than current used for screening, evaluation, assessment. For example, can define oil/gas from different pore systems rocks compared other macroscopic that only assess bulk recovery. manuscript included enhanced research. Also, damage potential drilling, completion, production fluids scales. Currently, emulsion droplet its behavior space recovery, etc. unconventional resources showed a very good exploration advancement fields tools. Field during drilling logging while geosteering, etc., well. Finally, future research directions introduced which include application multi-dimensional enhancement signal-to-noise ratio collected data operations.

Language: Английский

Citations

106

Advancing modified biochar for sustainable agriculture: a comprehensive review on characterization, analysis, and soil performance DOI Creative Commons
Ali Fakhar, Snowie Jane C. Galgo, Ronley C. Canatoy

et al.

Biochar, Journal Year: 2025, Volume and Issue: 7(1)

Published: Jan. 3, 2025

Abstract Biochar is a carbon-rich material produced through the pyrolysis of various feedstocks. It can be further modified to enhance its properties and referred as biochar (MB). The research interest in MB application soil has been on surge over past decade. However, potential benefits are considerable, efficiency subject influencing factors. For instance, unknown physicochemical characteristics, outdated analytical techniques, limited understanding factors that could impact effectiveness after application. This paper reviewed recent literature pertaining evolved characteristics provide comprehensive beyond synthesis techniques. These include surface area, porosity, alkalinity, pH, elemental composition, functional groups. Furthermore, it explored innovative methods for characterizing these evaluating their applications. In addition exploring limitations utilizing amendment, this article delved into influence efficacy, along with latest findings advancements technology. Overall, study will facilitate current knowledge identification gaps our MB. Graphical

Language: Английский

Citations

5

Research on in-situ condition preserved coring and testing systems DOI Creative Commons
Heping Xie, Tao Liu, Mingzhong Gao

et al.

Petroleum Science, Journal Year: 2021, Volume and Issue: 18(6), P. 1840 - 1859

Published: Nov. 10, 2021

As shallow resources are increasingly depleted, the mechanics' theory and testing technology of deep in-situ rock has become urgent. Traditional coring technologies obtain samples without retaining environmental conditions, leading to distortion measured parameters. Herein, a systems geological conditions is presented: system that obtains samples, transfer stores analyzes rocks under reconstructed environment. The ICP-Coring mainly consists pressure controller, active insulated core reactor insulation layer sealing film. ultimate bearing strength 100 MPa for pressure-preservation, temperature control accuracy 0.97% temperature-retained realized. CH4 CO permeability optimized film as low 3.85 0.33 ppm/min. average tensile elongation 152.4% light transmittance reduced 0%. Additionally, steady-state reconstructing environment storage up 1% ±0.2 achieved. error recorded noncontact sensor ring made low-density polymer less than 6% contact test. can provide technical support mechanics research, improving resource acquisition capabilities further clarifying deep-earth processes.

Language: Английский

Citations

59

Multi-scale pore structure characterization of lacustrine shale and its coupling relationship with material composition: An integrated study of multiple experiments DOI
Rixin Zhao, Haitao Xue, Shuangfang Lu

et al.

Marine and Petroleum Geology, Journal Year: 2022, Volume and Issue: 140, P. 105648 - 105648

Published: March 16, 2022

Language: Английский

Citations

57

Numerical studies and analysis on reaction characteristics of limestone and dolomite in carbonate matrix acidizing DOI
Yunjin Wang, Fujian Zhou, Ying Zhang

et al.

Geoenergy Science and Engineering, Journal Year: 2023, Volume and Issue: 222, P. 211452 - 211452

Published: Jan. 13, 2023

Language: Английский

Citations

28

Experimental study on seepage characteristics and stress sensitivity of desulfurization gypsum based concrete under triaxial stress DOI Creative Commons
Weipei Xue,

Chikama Twenda,

Manawwar Alam

et al.

Journal of Materials Research and Technology, Journal Year: 2023, Volume and Issue: 24, P. 6425 - 6437

Published: April 29, 2023

Converting industrial by-products into green building materials is critical to achieve a low-carbon circular economy. Permeability an important characteristic of material that can affect its various engineering applications. Therefore, this study investigated seepage characteristics and stress sensitivity material, i.e., modified desulfurization gypsum based concrete. Different initial load damage dry-wet-freeze-thaw alternating cycle test groups were established by simulating the service environment. evolution specimens under different states during loading unloading confining pressure was obtained. The phase divided high sensitive, medium low sensitive areas according coefficient, where corresponding permeability decreased rapidly, moderately, slowly. recovery degree increased gradually with decrease in stage. However, value generally lower than stage due plastic deformation pores specimens. higher more number cycles, greater loss rate Combined nuclear magnetic resonance results, it found environmental factors development pore structure each size specimens, resulting recovery. T2 relaxation time curve shifted left pressure, indicating became smaller, channel narrower, decreased.

Language: Английский

Citations

26

Multifractal characteristics on pore structure of Longmaxi shale using nuclear magnetic resonance (NMR) DOI
Na Zhang, Xinyue Wang, Shuaidong Wang

et al.

Geoenergy Science and Engineering, Journal Year: 2024, Volume and Issue: 241, P. 213176 - 213176

Published: July 24, 2024

Language: Английский

Citations

10

Recovery mechanism of supercritical CO2 miscible flooding in 30 nm nanomatrices with multi-scale and fracture heterogeneity DOI

Jiafeng Sun,

Linghui Sun,

Bo Bao

et al.

Fuel, Journal Year: 2025, Volume and Issue: 392, P. 134835 - 134835

Published: Feb. 26, 2025

Language: Английский

Citations

1

Experimental study on the mechanism of adsorption-improved imbibition in oil-wet tight sandstone by a nonionic surfactant for enhanced oil recovery DOI Creative Commons

Yongpeng Sun,

Yan Xin,

Fangtao Lyu

et al.

Petroleum Science, Journal Year: 2021, Volume and Issue: 18(4), P. 1115 - 1126

Published: July 8, 2021

In recent years, production from tight oil reservoirs has increasingly supplemented conventional resources. Oil-wet formations account for a considerable proportion of reservoirs. Surfactant can change wettability and reduce interfacial tension, thus resulting in better recovery. this manuscript, nonionic surfactant was introduced oil-wet The recovery the sandstone due to spontaneous imbibition 8.59% lower than that water-wet surfactant. 0.1% solution corresponded highest rate 27.02% sample. With treatment, treated core quickly changed weakly water-wet. capillary force acted as driving promoted imbibition. optimal adsorption quantity observed sample at concentrations ranging 0.3%, which also Analysis inverse Bond number NB−1 suggested gravity brine cores it cores. When concentration critical micelle concentration, negatively correlated with positively rate. higher increased smaller tension. Nuclear magnetic resonance movable pore throat size decreased 0.363 μm untreated rock 0.326 indicated improved flow capacity oil. findings study help understand impact surfactants on characteristics oil/water solid/liquid interfaces. mechanism further revealed. These systematic approaches select appropriate through

Language: Английский

Citations

49

Status and Outlook of Oil Field Chemistry-Assisted Analysis during the Energy Transition Period DOI
Bao Jia, Chenggang Xian,

Jyun‐Syung Tsau

et al.

Energy & Fuels, Journal Year: 2022, Volume and Issue: 36(21), P. 12917 - 12945

Published: Oct. 24, 2022

Analytical chemistry is powerful in analyzing complex mixtures of crude oil and brine subsurfaces on the basis atomic molecular levels. Geochemistry applies chemical principles experiments to understand earth science engineering problems. Crude oil's molecule structure, especially for resin asphaltenes, could only be understood using advanced analytical techniques. Fingerprinting geochemistry applied conventional unconventional reservoirs helps better identify hydrocarbon resources. Subsequently, reservoir fluid geodynamics (RFG) discipline promoted because gap between basin modeling simulation models with data. Fluid migration elaborated from geological time when trap was formed nowadays span millions years. Also, asphaltene data used delineate compartmentalization. This work reviews state-of-art theory technology upstream gas industry proposes an improvement high-resolution power efficient sustainable energy development.

Language: Английский

Citations

35