Studies on Treated Recycled Sand Derived from Construction and Demolition Wastes Towards Sustainable Road Construction DOI
Zainul Abedin Khan,

Umashankar Balunaini,

Susanga Costa

et al.

Lecture notes in civil engineering, Journal Year: 2024, Volume and Issue: unknown, P. 77 - 85

Published: Oct. 22, 2024

Language: Английский

Optimal development of the new type of ultra-fine fly ash semi flexible pavement grouting material: Rheological, mechanical, pore distribution, and hydration characteristics DOI
Wenhuan Liu, Yi-Wen Jiang,

Zhongzhong Zhao

et al.

Construction and Building Materials, Journal Year: 2024, Volume and Issue: 438, P. 137103 - 137103

Published: June 15, 2024

Language: Английский

Citations

2
Evaluation of cement-treated recycled concrete aggregates for sustainable pavement base/subbase construction DOI
Zainul Abedin Khan,

Umashankar Balunaini,

Nhu H.T. Nguyen

et al.

Construction and Building Materials, Journal Year: 2024, Volume and Issue: 449, P. 138417 - 138417

Published: Sept. 28, 2024

Language: Английский

Citations

2
Enhancing concrete strength and durability through incorporation of rice husk ash and high recycled aggregate DOI Creative Commons
Mohammad Alharthai, Kennedy C. Onyelowe,

Tariq Ali

et al.

Case Studies in Construction Materials, Journal Year: 2024, Volume and Issue: 22, P. e04152 - e04152

Published: Dec. 25, 2024

Language: Английский

Citations

1
Investigating the method of tungsten leaching from hydrocracking catalyst HC-102 W/Ni/Al2O3/SiO2 DOI Creative Commons
Mohammad Reza Borhani, Fareed Kermani

Results in Engineering, Journal Year: 2024, Volume and Issue: 23, P. 102488 - 102488

Published: June 28, 2024

This study investigates the process of extracting tungsten from used hydrocracking catalyst (specifically model 102-HC W/Ni/Al2O3, SiO2), and provides valuable insights into efficient recycling secondary sources. Tungsten samples are isolated with sodium hydroxide(NaOH, caustic soda or lye) then analyzed using X-ray fluorescence (XRF) methods. The main components sample lithium-aluminum-tungsten-oxide (LiAIW2O4), nickel-molybdenum oxide (NiMoO4), (WO3), silicon (SiO2). experimental design focuses on parameters such as roasting temperature, time, pulp density, leaching time during preparation operation. temperature have a combined effect extraction, being factor. Increasing density reduces longer hydroxide improves recovery. Under conditions 800 °C, 120 min, 10 %, 70 60 dissolution recovery rate is 92.3 %.

Language: Английский

Citations

0
Effect of Brick Aggregate Content on Performance of Recycled Construction-Solid-Waste Aggregate DOI Open Access
Xuan Zhu, Le Ding, Yuexing Wu

et al.

Materials, Journal Year: 2024, Volume and Issue: 17(11), P. 2616 - 2616

Published: May 29, 2024

In road engineering, construction requires a large amount of natural aggregate; its substitution with recycled construction-solid-waste aggregate not only saves resources but also reduces the burden on environment. The main components solid waste are concrete blocks and brick slag; breakability latter can affect performance mixed aggregate, which hinders use in engineering applications. To analyze applicability containing slag subgrade layer, effect content CBR (California bearing ratio) crushing value aggregates was evaluated based laboratory tests, field compaction quality analyzed. results show that 9.5–19 mm samples were crushed to higher degree during process. A less than 40% had little aggregate. It is recommended 22 t roller for five passes (two weak vibrations + two strong one vibration) at speed 3 km/h stage filling.

Language: Английский

Citations

0
Studies on Treated Recycled Sand Derived from Construction and Demolition Wastes Towards Sustainable Road Construction DOI
Zainul Abedin Khan,

Umashankar Balunaini,

Susanga Costa

et al.

Lecture notes in civil engineering, Journal Year: 2024, Volume and Issue: unknown, P. 77 - 85

Published: Oct. 22, 2024

Language: Английский

Citations

0