Effect of Annealing Temperature on the Microstructure and Anti-Corrosion Function of Novel Cr2alc Max-Phase Coatings

Published: Jan. 1, 2025

This study explores Cr2AlC max-phase coatings on Zircaloy-4 substrates via magnetron sputtering and subsequent thermal annealing at various temperatures (425-500 °C). The coatings, initially amorphous, crystallized with increasing temperatures, enhancing the phase. Hardness improved significantly in annealed from 308.7 ± 13.3 Hv 425 °C to 365.3 10.8 500 °C, compared unannealed coating (210.4 11.7 Hv) substrate (199.2 3.7 Hv). However, surface cracks were observed most samples. Elemental mapping showed increased carbon higher temperatures. Electrochemical impedance spectroscopy (EIS) indicated that corrosion resistance decreased highest was (9.80 × 106 Ω cm2), while lowest (1.24 cm2). had even lower (5.39 105

Language: Английский

---

Fabrication of advanced cellulose-based devices for solar desalination: A review

International Journal of Biological Macromolecules, Journal Year: 2025, Volume and Issue: 310, P. 143250 - 143250

Published: April 16, 2025

Language: Английский

---

Solar interfacial evaporation: From evaporation material design, condensing unit application to practical applications

Chemical Engineering Journal, Journal Year: 2025, Volume and Issue: unknown, P. 162792 - 162792

Published: April 1, 2025

---

In-situ branched Poly (butylene succinate-co-butylene terephthalate) for green preparation of ultralight foams: simultaneous enhanced mechanical and degradation properties

Polymer, Journal Year: 2025, Volume and Issue: unknown, P. 128519 - 128519

Published: May 1, 2025

Language: Английский

---

Monstera adansonii-inspired lignocellulose-derived bionic solar evaporator for solar steam generation

International Journal of Biological Macromolecules, Journal Year: 2025, Volume and Issue: unknown, P. 144225 - 144225

Published: May 1, 2025

---