Regenerative Engineering and Translational Medicine, Journal Year: 2025, Volume and Issue: unknown
Published: Feb. 3, 2025
Language: Английский
The International Journal of Advanced Manufacturing Technology, Journal Year: 2023, Volume and Issue: 127(1-2), P. 935 - 950
Published: May 22, 2023
Abstract In this paper, for the first time, role of manufacturing parameters fused deposition modeling (FDM) on shape memory effect (SME) is investigated by design experiments. PLA-TPU blend with a weight composition 30:70% processed melt mixing and then extruded into 1.75 mm filaments 3D printing via FDM. SEM images reveal that TPU droplets are distributed in PLA matrix, immiscible matrix-droplet morphology evident. Box-Behnken (BBD), as an experimental response surface method (RSM), implemented to fit model between variables responses. The shell, infill density, nozzle temperature selected variables, their effects loading stress, recovery fixity, ratio studied detail. An analysis variance (ANOVA) applied estimate importance each parameter output assess fitness presented model. ANOVA results high accuracy parameters. Infill density had greatest least roles properties, respectively. Also, values fixity were obtained ranges 58–100% 53–91%, Despite many researches 4D PLA, low ductility at room stress relaxation rate its weakness, which covered adding research. Due lack similar outcomes specialized literature, paper likely fill gap state-of-the-art problem supply pertinent data instrumental FDM functional polymers less material consumption.
Language: Английский
Citations
95
Journal of Magnesium and Alloys, Journal Year: 2023, Volume and Issue: 11(11), P. 3867 - 3895
Published: Nov. 1, 2023
As the lightest structural metal and one of most abundant metallic elements on earth, magnesium (Mg) has been used as an "industrial metal" for lightweighting in transportation electronics industries, addition to other traditional applications aluminum alloying, steel desulfurization protective anodes. In recent years, research shown significant potential Mg become a "technology variety new from energy storage/battery biomedical products. However, global production steady but moderate growth last three decades. industry are still limited due some sustainability concerns primary production, well number technical issues related corrosion performance commercial alloys. New industrial or technology face tremendous challenges, which have reflected intensified efforts twenty years. This paper will review past present applications, discuss future opportunities challenges community.
Language: Английский
Citations
95
Journal of Materials Science, Journal Year: 2023, Volume and Issue: 58(16), P. 7227 - 7243
Published: April 1, 2023
Language: Английский
Citations
82
Polymers, Journal Year: 2024, Volume and Issue: 16(6), P. 831 - 831
Published: March 18, 2024
Fused Deposition Modeling (FDM) is an additive manufacturing technology that has emerged as a promising technique for fabricating 3D printed polymers. It gained attention recently due to its ease of use, efficiency, low cost, and safety. However, 3D-printed FDM components lack sufficient strength compared those made using conventional methods. This can be mainly attributed high porosity sinterability layers then the characteristics polymer used in process or itself. Regarding characteristics, there are two main types reinforcing fibers: discontinuous (short) continuous. Continuous-fiber reinforced composites becoming popular various industries their excellent mechanical properties. Since continuous fibers have more positive effect on increasing parts, this article focuses primarily long fibers. In addition different mechanisms been developed introduced address issue insufficient parts. comprehensively explains mechanisms: in-situ fusion ex-situ prepreg. also provides relevant examples these elements. Additionally, some other less frequently utilized discussed. Each mechanism own advantages disadvantages, indicating further development modification needed increase parts comparable produced traditional
Language: Английский
Citations
76
Journal of Magnesium and Alloys, Journal Year: 2023, Volume and Issue: 11(2), P. 425 - 461
Published: Feb. 1, 2023
The magnesium matrix composites (MMCs) formed by introducing reinforcements to alloys overcome the limitations of mechanical properties a certain extent, presenting unique and excellent that any component does not have, such as high specific stiffness strength, good dimensional stability, outstanding shock absorption performance, electromagnetic shielding hydrogen storage characteristics, etc. As an emerging manufacturing technology, additive (AM) is based on design three-dimensional (3D) data model obtain 3D objects through layer-by-layer processing, which possesses advantages short cycle, material utilization rate, degree freedom, ability fabricate complex structural components. Combining strength MMCs technical AM forming parts with prepared have huge potential broad application prospects in new high-tech industries automobile, aerospace, consumer electronics biomedicine, This paper reviews research progress field MMCs, mainly introduces main technologies, including selective laser melting (SLM), electron beam (EBSM), engineered net shaping (LENS) wire arc (WAAM). formation mechanism control methods typical defects balling effect, porosity, poor fusion, loss alloy elements cracks produced during are discussed. challenges proposed from aspects composition preparation powder raw material. relationship between microstructure properties, corrosion performance biocompatibility elaborated detail. various fields at present future introduced. Finally, development direction urgent problems be solved prospected.
Language: Английский
Citations
71
Metals, Journal Year: 2023, Volume and Issue: 13(2), P. 424 - 424
Published: Feb. 18, 2023
Powder bed fusion (PBF) is recognized as one of the most common additive manufacturing technologies because its attractive capability fabricating complex geometries using many possible materials. However, quality and reliability parts produced by this technology are observed to be crucial aspects. In addition, challenges PBF-produced hot issues among stakeholders still insufficient meet strict requirements high-tech industries. This paper discusses present state art in PBF technological challenges, with a focus on selective laser melting (SLM). The review work focuses mainly articles that emphasize status metal-based AM, study primarily limited open-access sources, special attention given process parameters flaws determining factor for printed part reliability. Moreover, defects due an unstrained parameter SLM those needed monitor sustain components encompassed. From work, it has been there several factors, such parameters, powder characteristics, material properties printing chamber environments, affect mechanical parts. It also concluded not only expensive slow compared conventional processes, but suffers from key drawbacks, terms dimensional accuracy, strength surface roughness.
Language: Английский
Citations
65
Journal of Materials Research and Technology, Journal Year: 2023, Volume and Issue: 23, P. 2189 - 2201
Published: Jan. 20, 2023
The process of sintering involves applying pressure and heat to the materials without melting them in order fuse particles together into a solid mass. fusion between particle are also known as interparticles necking which plays an important role producing high-density products. Increasing size will allow formation smaller pore sizes help produce stronger higher hardness materials. essential high porosity products that commonly used for medical applications still required tensile value hardness. For this, proper parameters were larger growth. To get better understanding this matter, effect powder processing be reviewed article. different processes such conventional sintering, microwave selective laser melting, others discussed paper well.
Language: Английский
Citations
51
Metals, Journal Year: 2023, Volume and Issue: 13(8), P. 1370 - 1370
Published: July 30, 2023
Additive manufacturing (AM) represents the present and future of production, thanks to a new design paradigm that allows customization components based on needs final application, all framed in perspective sustainable on-demand production. It has become an increasingly popular method for complex custom parts, especially those made from metallic materials, such as AISI 316L. 316L is type austenitic steel widely used industries aerospace, medical, automotive, marine due its excellent corrosion resistance high strength. Thanks physico-chemical properties, stainless one most metals AM. In this paper, critical review printing technologies, microstructural defects, mechanical well industrial applications are presented state art. Furthermore, main challenges with AM techniques discussed, influence parameters, surface quality, other common problems identified literature. Overall, paper provides comprehensive overview techniques, challenges, research directions.
Language: Английский
Citations
49
Journal of Magnesium and Alloys, Journal Year: 2024, Volume and Issue: 12(5), P. 1663 - 1686
Published: May 1, 2024
Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight, high specific strength, and corrosion resistance, making them attractive applications medical, aerospace, automotive, other transport industries. However, widespread application is hindered by low formability at room temperature due to limited slip systems. Cast mechanical the presence of casting defects porosity anisotropy addition scrap. While methods benefit from established process optimization techniques these problems, additive manufacturing are increasingly replacing Mg alloys they provide more precise control over microstructure allow grain orientations, potentially enabling easier certain applications. Although metal (MAM) technology also results some inhomogeneous microstructural evolution additively manufactured alloy parts exhibit lower than wrought parts, general superior cast counterparts. Thus, MAM a promising technique produce parts. Directed energy deposition processes, particularly wire arc directed (WA-DED), emerged an advantageous (AM) metallic materials including magnesium alloys, offering advantages rates, improved material efficiency, reduced production costs compared subtractive processes. inherent challenges associated with magnesium, its reactivity susceptibility oxidation, pose unique hurdles this technology. This review paper delves into progress made DED Mg-alloys, challenges, prospects. Furthermore, predominant imperfections, notably porosity, observed Mg-alloy components through discussed. Additionally, preventive measures implemented counteract formation explored.
Language: Английский
Citations
48
Journal of Magnesium and Alloys, Journal Year: 2024, Volume and Issue: 12(4), P. 1260 - 1282
Published: April 1, 2024
Biomedical magnesium (Mg) alloys have garnered significant attention because of their unique biodegradability, favorable biocompatibility, and suitable mechanical properties. The incorporation rare earth (RE) elements, with distinct physical chemical properties, has greatly contributed to enhancing the performance, degradation behavior, biological performance biomedical Mg alloys. Currently, a series RE-Mg are being designed investigated for orthopedic implants cardiovascular stents, achieving substantial encouraging research progress. In this work, comprehensive summary state-of-the-art in is provided. physiological effects design standards RE elements discussed. Particularly, behavior including underlying action studied in-depth. Furthermore, preparation techniques current application status reviewed. Finally, we address ongoing challenges propose future prospects guide development high-performance Mg-RE
Language: Английский
Citations
36