Effect of sodium dodecylbenzene sulphonate additive on the electrochemical performance of aqueous zinc ion batteries DOI Open Access
Ying Huang, Na Chen, Yuan Lv

et al.

The Canadian Journal of Chemical Engineering, Journal Year: 2025, Volume and Issue: unknown

Published: Jan. 9, 2025

Abstract Aqueous zinc ion batteries have shown great potential for large‐scale energy storage systems and attracted widespread market interest. However, side reactions such as passivation of anode hinder its further development towards practical applications. In this paper, sodium dodecylbenzene sulphonate (SDBS) was used an aqueous electrolyte additive to improve the cycling performance. The experimental results show that SDBS can form a stable protective film on electrode surface, inhibit formation growth dendrites, reduce electrolyte, thus improving electrochemical performance battery. application in Na 3 V 2 (PO 4 ) /Zn (NVP/Zn) full significantly improves Coulombic efficiency batteries, inhibits occurrence reactions, slows down decay reversible specific capacity. NVP/Zn cell with addition achieved 81% capacity retention after 100 cycles at 0.5C magnification, polarization reduced. This work provides simple feasible method increase diffusion rate Zn 2+ .

Language: Английский

Protein Interfacial Gelation toward Shuttle‐Free and Dendrite‐Free Zn–Iodine Batteries DOI Creative Commons
Shaojian Zhang, Junnan Hao, Han Wu

et al.

Advanced Materials, Journal Year: 2024, Volume and Issue: 36(35)

Published: July 6, 2024

Aqueous zinc-iodine (Zn-I

Citations

34

Mullite Mineral‐Derived Robust Solid Electrolyte Enables Polyiodide Shuttle‐Free Zinc‐Iodine Batteries DOI
Fulong Li,

Chuancong Zhou,

Jie Zhang

et al.

Advanced Materials, Journal Year: 2024, Volume and Issue: 36(38)

Published: July 25, 2024

Zinc dendrite, active iodine dissolution, and polyiodide shuttle caused by the strong interaction between liquid electrolyte solid electrode are chief culprits for capacity attenuation of aqueous zinc-iodine batteries (ZIBs). Herein, mullite is adopted as raw material to prepare Zn-based solid-state (Zn-ML) ZIBs through zinc ion exchange strategy. Owing merits low electronic conductivity, diffusion energy barrier, adsorption capability, Zn-ML can effectively isolate redox reactions anode AC@I

Language: Английский

Citations

25

Molecular Catalysis Enables Fast Polyiodide Conversion for Exceptionally Long-Life Zinc–Iodine Batteries DOI

Zihui Chen,

Feifei Wang,

Runlin Ma

et al.

ACS Energy Letters, Journal Year: 2024, Volume and Issue: 9(6), P. 2858 - 2866

Published: May 20, 2024

Zinc–iodine (Zn–I2) batteries hold great promise for high-performance, low-cost electrochemical energy storage, but their practical application faces thorny challenges associated with polyiodide shuttling and insufficient cycling stability. Herein, we propose molecular catalysis long-life Zn–I2 batteries, employing Hemin as an efficient stable catalyst. The molecules containing pentacoordinated iron sites significantly adsorb polyiodides, improve the conversion kinetics of iodine species, reduce triiodide concentration, suppress shuttling. Benefiting from catalysis, demonstrate exceptional life, exceeding 62000 cycles only 0.00052% decay per cycle while maintaining discharge voltage plateaus. pivotal function in both adsorption species shows its significant impact on improving lifespan toward storage.

Language: Английский

Citations

14

Toward High-Energy-Density Aqueous Zinc–Iodine Batteries: Multielectron Pathways DOI
Shaojian Zhang, Junnan Hao, Han Wu

et al.

ACS Nano, Journal Year: 2024, Volume and Issue: 18(42), P. 28557 - 28574

Published: Oct. 9, 2024

Aqueous zinc–iodine batteries (ZIBs) based on the reversible conversion between various iodine species have garnered global attention due to their advantages of fast redox kinetics, good reversibility, and multielectron feasibility. Although significant progress has been achieved in ZIBs with two-electron I–/I2 pathway (2eZIBs), relatively low energy density hindered practical application. Recently, four-electron I–/I2/I+ electrochemistry (4eZIBs) shown a improvement density. Nonetheless, use 4eZIBs is challenged by poor reversibility polyiodide shuttling during I+ hydrolysis I2/I+ conversion. In this Review, we thoroughly summarize fundamental understanding two ZIBs, including reaction mechanisms, limitations, strategies. Importantly, provide an intuitive evaluation assess potential highlight critical impacts Zn utilization rate. Finally, emphasize cost issues associated electrodes propose closed-loop recycling routes for sustainable storage ZIBs. These findings aim motivate application advanced promote storage.

Language: Английский

Citations

12

Holistic optimization strategies for advanced aqueous zinc iodine batteries DOI Creative Commons
Junwei Xu, Zhongyuan Huang, Haihui Zhou

et al.

Energy storage materials, Journal Year: 2024, Volume and Issue: 72, P. 103596 - 103596

Published: June 25, 2024

Zinc-based batteries are gaining prominence as promising alternatives to lithium-ion (LIBs) in the pursuit of Net-Zero goals, owing their cost-effectiveness, scalability, and reduced resource dependency. Aqueous rechargeable zinc-iodine (Zn-I2) batteries, particular, emerging an enticing choice for future energy storage systems, thanks eco-friendly nature, impressive theoretical capacity, energy/power density. Nevertheless, several challenges, including well-known polyiodide shuttling phenomenon, suboptimal thermodynamic stability, issues like corrosion dendrite formation on Zn metal anodes, impede practical implementation. Tremendous progress has been achieved circumvent these recent years, though a comprehensive review article both entry-level experienced researchers is still lacking up date. This aims at discussing fundamentals, solutions enable understanding electrochemistry mechanisms, systematically summarizing past, present, technologies strategies involving iodine cathode design modification, interlayer construction/separator electrolytes optimization, anodes protection. Additionally, based achievements, some directions efforts developing high-performance Zn−I2 proposed accelerate commercial applications.

Language: Английский

Citations

11

Diatomic Catalysts for Aqueous Zinc‐Iodine Batteries: Mechanistic Insights and Design Strategies DOI

Peng Hei,

Ya Sai,

Wenjie Li

et al.

Angewandte Chemie International Edition, Journal Year: 2024, Volume and Issue: 63(49)

Published: Sept. 13, 2024

Abstract There has been a growing interest in developing catalysts to enable the reversible iodine conversion reaction for high‐performance aqueous zinc‐iodine batteries (AZIBs). While diatomic (DACs) have demonstrated superior performance various catalytic reactions due their ability facilitate synergistic charge interactions, application AZIBs remains unexplored. Herein, we present, first time, DAC comprising Mn−Zn dual atoms anchored on nitrogen‐doped carbon matrix (MnZn−NC) loading, resulting AZIB with capacity of 224 mAh g −1 at 1 A and remarkable cycling stability over 320,000 cycles. The electron hopping along Mn−N−Zn bridge is stimulated via spin exchange mechanism. This process broadens Mn 3d xy band width enhances metallic character catalyst, thus facilitating transfer between intermediates. Additionally, increased occupancy within d‐orbital Zn elevates Zn's d‐band center, thereby enhancing chemical interactions MnZn−NC I‐based species. Furthermore, our mechanism demonstrates potential applicability other Metal‐Zn−NC DACs spin‐polarized atoms. Our work elucidates clear mechanistic understanding provides new insights into catalyst design AZIBs.

Language: Английский

Citations

11

Size Confinement Strategy Effect Enables Advanced Aqueous Zinc–Iodine Batteries DOI
Nana Li,

Zhangbin Yang,

Yong Li

et al.

Advanced Energy Materials, Journal Year: 2024, Volume and Issue: 14(44)

Published: Aug. 6, 2024

Abstract Aqueous Zn–I 2 batteries have considerable potential owing to their environmental friendliness and high safety. However, the slow iodine conversion kinetics shuttle effect prevent practical applicability. In this study, a series of Zn‐MOF‐74 rods with controllable diameters 40–500 nm are facilely prepared, denoted as P1–P5. A size confinement strategy derived porous carbon hosts is proposed suppress formation undesirable species, such I 3 − 5 . Moreover, graphitization degree samples, including P2‐900, P2‐1000, P2‐1100, play critical on kinetics. The P2‐1000 sample possesses conductive skeleton abundant mesopores, which improve adsorption ability toward species. electrochemical tests in situ technology reveal mechanism iodine. As result, @P2‐1000 cathode exhibits superior discharge capacity 179.9 mA h g −1 at 100 exceptional long‐term cycle after 5000 cycles. Furthermore, soft flexible quasi‐solid‐state capable powering devices, promising exhibit tremendous adaptability realize electronic devices various scenarios.

Language: Английский

Citations

10

Issues and optimization strategies of binders for aqueous zinc metal batteries DOI
Miao Zhou,

Xiaotao Zhou,

Yu Yang

et al.

Chemical Engineering Journal, Journal Year: 2024, Volume and Issue: 497, P. 154916 - 154916

Published: Aug. 17, 2024

Language: Английский

Citations

10

Green biomass: the impact of high-adhesion and well-dispersed binders on the sodium storage performance and interfacial interaction of hard carbon anodes DOI

Jiaqi Jiao,

Conghua Yi, Xueqing Qiu

et al.

Green Chemistry, Journal Year: 2024, Volume and Issue: 26(11), P. 6643 - 6655

Published: Jan. 1, 2024

Preparation of a high adhesion and dispersibility sodium carboxymethyl cellulose/sodium lignosulfonate(CMC/LS) water-soluble binder elucidated the impact functional groups on electrode interface.

Language: Английский

Citations

9

A tripartite synergistic optimization strategy for zinc-iodine batteries DOI Creative Commons

Weibin Yan,

Ying Liu, Jiehong Qiu

et al.

Nature Communications, Journal Year: 2024, Volume and Issue: 15(1)

Published: Nov. 9, 2024

The energy industry has taken notice of zinc-iodine (Zn-I

Language: Английский

Citations

9