Optimization of Avocado Seed Starch Based Degradable Plastic Synthesis with Polylactic Acid (PLA) Blend using Response Surface Methodology (RSM) DOI Open Access
Rozanna Dewi, Novi Sylvia, Zulnazri Zulnazri

et al.

Published: July 19, 2024

The research improves the strength of plastic using avocado seed starch and PLA. effect blending PLA was optimized RSM approach by two variables: water absorption biodegradability. Mixing them gave best result: 1.8 g 3 Degradable has a (tensile 10.1 MPa; elongation at break 85.8%; young modulus 190 MPa). Infrared spectroscopy showed that had -OH bond 3273.20 cm-1, 3502.73 3647.39 CH2 2953.52 2945.30 2902.87 C=C 1631.78 C-O 1741.72 cm-1. decomposed in soil. It organic hydrophilic. Thermal tests, can withstand heat well, losing weight 356.86°C to 413.64°C, forming crystals melts 159.10°C—the same as Melt flow test, sample before measurement, therefore not measurable—process conditions affect. Water 5.763% biodegradation rate 37.988% for 12 days. In morphology analysis, fused form smooth surface. found value close 1. process parameters.

Language: Английский

Effect of Polylactic Acid (PLA) as Reinforcement for Jackfruit Seed Starch-Based Degradable Plastic DOI Creative Commons
Rozanna Dewi, Novi Sylvia, Medyan Riza

et al.

Published: Jan. 27, 2025

Language: Английский

Citations

0
Optimization of Avocado Seed Starch Based Degradable Plastic Synthesis with Polylactic Acid (PLA) Blend using Response Surface Methodology (RSM) DOI Open Access
Rozanna Dewi, Novi Sylvia, Zulnazri Zulnazri

et al.

Published: July 19, 2024

The research improves the strength of plastic using avocado seed starch and PLA. effect blending PLA was optimized RSM approach by two variables: water absorption biodegradability. Mixing them gave best result: 1.8 g 3 Degradable has a (tensile 10.1 MPa; elongation at break 85.8%; young modulus 190 MPa). Infrared spectroscopy showed that had -OH bond 3273.20 cm-1, 3502.73 3647.39 CH2 2953.52 2945.30 2902.87 C=C 1631.78 C-O 1741.72 cm-1. decomposed in soil. It organic hydrophilic. Thermal tests, can withstand heat well, losing weight 356.86°C to 413.64°C, forming crystals melts 159.10°C—the same as Melt flow test, sample before measurement, therefore not measurable—process conditions affect. Water 5.763% biodegradation rate 37.988% for 12 days. In morphology analysis, fused form smooth surface. found value close 1. process parameters.

Language: Английский

Citations

2