Simulation of Flax Threshing Process by Different Forms of Threshing Drums in Combined Harvesting DOI Creative Commons

Ruijie Shi,

Leilei Chang,

Wuyun Zhao

et al.

Agronomy, Journal Year: 2024, Volume and Issue: 15(1), P. 36 - 36

Published: Dec. 27, 2024

Flax, an important oil and fiber crop, is widely cultivated in temperate sub-frigid regions worldwide. China one of the major producers flax, with Gansu Province predominantly practicing cultivation hilly areas. However, common issues such as feeding difficulties, stem entanglement, low threshing efficiency significantly restrict improvement planting efficiency. This study addresses key technical challenges flax combine harvesting by developing a discrete element model plant utilizing DEM-FEA co-simulation technology. The performance two drum models (T1 T2) was analyzed, focusing on motion trajectory, stress distribution, effects. simulation results show that T2 model, its combination rib rod tooth design, improves separation loss rate reduced from 5.6% T1 to 1.78% while maximum deformation were lower, indicating higher structural stability durability. Field validation revealed had total 3.32%, impurity 3.57%, 0.09 hm2/h. In contrast, achieved 2.29%, 3.39%, 0.22 hm2/h, representing 144.4% working These findings indicate has potential for mountainous regions, especially improving operational stability, providing theoretical basis optimizing equipment design.

Language: Английский

Efficient cadmium uptake and accumulation in pokeweed (Phytolacca americana L.) associated with its potential for phytoremediation of cadmium-polluted soils DOI

Yifan Xia,

Fan Yang, Lin Hu

et al.

Plant and Soil, Journal Year: 2025, Volume and Issue: unknown

Published: April 2, 2025

Language: Английский

Citations

0
Simulation of Flax Threshing Process by Different Forms of Threshing Drums in Combined Harvesting DOI Creative Commons

Ruijie Shi,

Leilei Chang,

Wuyun Zhao

et al.

Agronomy, Journal Year: 2024, Volume and Issue: 15(1), P. 36 - 36

Published: Dec. 27, 2024

Flax, an important oil and fiber crop, is widely cultivated in temperate sub-frigid regions worldwide. China one of the major producers flax, with Gansu Province predominantly practicing cultivation hilly areas. However, common issues such as feeding difficulties, stem entanglement, low threshing efficiency significantly restrict improvement planting efficiency. This study addresses key technical challenges flax combine harvesting by developing a discrete element model plant utilizing DEM-FEA co-simulation technology. The performance two drum models (T1 T2) was analyzed, focusing on motion trajectory, stress distribution, effects. simulation results show that T2 model, its combination rib rod tooth design, improves separation loss rate reduced from 5.6% T1 to 1.78% while maximum deformation were lower, indicating higher structural stability durability. Field validation revealed had total 3.32%, impurity 3.57%, 0.09 hm2/h. In contrast, achieved 2.29%, 3.39%, 0.22 hm2/h, representing 144.4% working These findings indicate has potential for mountainous regions, especially improving operational stability, providing theoretical basis optimizing equipment design.

Language: Английский

Citations

0