Direct correlation between surface integrity and fatigue limit of surface cold worked chromium-nickel austenitic stainless steels DOI Creative Commons
Jordan Maximov, Galya Duncheva, Angel Anchev

et al.

Research Square (Research Square), Journal Year: 2023, Volume and Issue: unknown

Published: Aug. 28, 2023

Abstract Direct correlations were established between basic surface integrity (SI) characteristics (roughness, microhardness, residual stresses) obtained as a result of cold working (SCW) and bending fatigue limit chromium-nickel austenitic stainless steels (CNASS). The results experimental tests optimization the SCW process, implemented via hardening diamond burnishing (DB), are presented. When requirement for corresponding component is high limit, information will help researcher to find inverse correlation SI finishing so that when process implementing by another method, same can be achieved. Five roughness parameters functionally significant indicators behavior, axial hoop stresses form vector objective functions. governing factors force number passes. was accelerated Locati’s method. models planned experiment regression analyses. eliminating variables in pairs models. change trends microhardness found identical, i.e., CNASS controlled inexpensively measured such microhardness. In other words, any static coldworking optimized without carrying out choosing these functions seeking compromise optimal solution simultaneously achieves values skewness low value parameter Ra. Given direct maximizes while satisfying particular requirements. multi-objective performed comparisons made prove effectiveness proposed approach.

Language: Английский

2017A Alloy surface layer after flow burnishing with glass microspheres DOI
Katarzyna Korzyńska,

T. Żarski,

Wojciech Zeglicki

et al.

The International Journal of Advanced Manufacturing Technology, Journal Year: 2024, Volume and Issue: 132(5-6), P. 2477 - 2487

Published: April 2, 2024

Language: Английский

Citations

0
Machine Learning-Based Optimization of Diamond Burnishing Parameters in Terms of Energy Efficiency and Quality Indexes DOI
An-Le Van, Trung-Thanh Nguyen

Arabian Journal for Science and Engineering, Journal Year: 2024, Volume and Issue: unknown

Published: Aug. 17, 2024

Language: Английский

Citations

0
Influence of Selected Factors of Vibratory Work Hardening Machining on the Properties of CuZn30 Brass DOI Open Access
Damian Bańkowski,

A. Kiljan,

Irena M. Hlaváčová

et al.

Materials, Journal Year: 2024, Volume and Issue: 17(23), P. 5913 - 5913

Published: Dec. 3, 2024

The purpose of this study was to determine the effect selected vibratory strengthening machining factors on properties CuZn30 brass. Vibratory carried out using metal media dedicated polishing processes, which also contributed treated surfaces. test samples were cut with an abrasive water jet and recrystallized obtain a soft microstructure. An orthogonal, two-factor five-level plan used for study. vibration frequency time changes in parameters geometric structure surface hardness layer determined Statistica software version 10 (64-bit). Higher frequencies increased machined surfaces by as much 50 HV

Language: Английский

Citations

0
Direct correlation between surface integrity and fatigue limit of surface cold worked chromium-nickel austenitic stainless steels DOI Creative Commons
Jordan Maximov, Galya Duncheva, Angel Anchev

et al.

Research Square (Research Square), Journal Year: 2023, Volume and Issue: unknown

Published: Aug. 28, 2023

Abstract Direct correlations were established between basic surface integrity (SI) characteristics (roughness, microhardness, residual stresses) obtained as a result of cold working (SCW) and bending fatigue limit chromium-nickel austenitic stainless steels (CNASS). The results experimental tests optimization the SCW process, implemented via hardening diamond burnishing (DB), are presented. When requirement for corresponding component is high limit, information will help researcher to find inverse correlation SI finishing so that when process implementing by another method, same can be achieved. Five roughness parameters functionally significant indicators behavior, axial hoop stresses form vector objective functions. governing factors force number passes. was accelerated Locati’s method. models planned experiment regression analyses. eliminating variables in pairs models. change trends microhardness found identical, i.e., CNASS controlled inexpensively measured such microhardness. In other words, any static coldworking optimized without carrying out choosing these functions seeking compromise optimal solution simultaneously achieves values skewness low value parameter Ra. Given direct maximizes while satisfying particular requirements. multi-objective performed comparisons made prove effectiveness proposed approach.

Language: Английский

Citations

0