Cited by Examining Thermogravimetric Response and Morphological Alterations in Epoxy Composites with Hybrid Ceramic Fillers Integration

Effect of surface treatment on interfacial shear strength of basalt fiber reinforced polypropylene composite DOI

Ying‐Guo Zhou, Tongxiang Liang, Buyong Wu

et al.

Polymer Composites, Journal Year: 2025, Volume and Issue: unknown

Published: Jan. 10, 2025

Abstract Basalt fiber‐reinforced polypropylene (BFPP) is an important composite for thermoplastic polymer materials with wide applications due to the strong mechanical properties and ease of recycling, composites are highly dependent on interfacial adhesion between fibers matrices, especially foamed products. In this study, in order enhance BF PP, a novel situ treating technology, which was proved modify rapidly surface BF, proposed used fabricating BFPP composite. After treatment by both silane coupling agent self‐made sizing agent, exhibited uneven regular grooves, PP matrix achieved, leading enhanced shear strength (ISS) 14.39 MPa. Hence, tensile solid samples were 53.64 50.48 MPa, showed roughly 57.1% 79.4% increase than that untreated indicating efficient reinforcing effect BFs composites. Moreover, parts more sensitive ISS ones, attributed variation critical length resulting from cells. This work provided facile method fabricate extraordinary application potential fields industry, sports, transportation. Highlights A processing coating proposed. The bonding fiber verified. Sensitivity different.

Language: Английский

Citations

Synergistic effects of basalt and carbon fibers on the physical, mechanical, and thermal properties of nylon composites DOI

C. R. Raajeshkrishna, P. Chandramohan,

G. Rajeshkumar

et al.

Colloid & Polymer Science, Journal Year: 2025, Volume and Issue: unknown

Published: April 10, 2025

Language: Английский

Citations

Investigation of Aramid Fiber, Glass Fiber, and Boron Nitride Nanoplate (BNNP) Structures in Terms of Hybridization, Mechanical, Hardness, and Drillability DOI

Zafer Kaya, Murat Koyunbakan, Ubeyd Akansel

et al.

Polymers for Advanced Technologies, Journal Year: 2025, Volume and Issue: 36(4)

Published: April 1, 2025

ABSTRACT In this study, four different composite structures (1‐E glass fiber reinforced laminated polymer composite, 2‐aramid 3‐E glass/aramid hybrid 4‐E nano‐added (boron nitride nanoplates (BNNPs)) nanocomposite) were produced. Tensile strength, elasticity modulus, and unit strain changes determined under uniaxial constant jaw speed. The Shore D hardness properties also evaluated by measuring from both the surfaces thickness aspects. Drilling experiments carried out using same diameter HSS bits, carbide end mill at processing parameters. Drillability was depending on input output delamination factors thrust force. Four showed strength % elongation plate cutting directions. Up to 10 times observed in 45 0 test specimens. specimens, found be 1/3 weaker elastic modulus 1/5 weaker. While nano‐additive gave successful results surface hardness, it caused a weak among layers direction. general, more drilling process compared other bits.

Language: Английский

Citations

Examining Thermogravimetric Response and Morphological Alterations in Epoxy Composites with Hybrid Ceramic Fillers Integration DOI

K.P. Srinivasa Perumal,

L. Selvarajan, Santhosh Mozhuguan Sekar

et al.

Materials Chemistry and Physics, Journal Year: 2024, Volume and Issue: 325, P. 129755 - 129755

Published: July 29, 2024

Language: Английский

Citations