The Enhancement of Performance Coefficient by Spraying Water on the Condenser of the Compression Cooling Cycle DOI Creative Commons
Maki H. Zaidan,

Aadel A. R. Alkumait,

Ahmed Qays Abdullah

et al.

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Journal Year: 2024, Volume and Issue: 120(1), P. 140 - 150

Published: Aug. 15, 2024

During hot and dry summer months in regions or deserts, compression refrigeration cycles that utilize modern, environmentally friendly refrigerants operate at high gas pressures, particularly when the ambient temperature exceeds 40°C. These systems will consume more energy summer, leading to a lower coefficient of performance (COP) compared cooling do not this type refrigerant gas. In study, both theoretical experimental analyses were undertaken explore an effective solution for enhancing system. This involved reducing air before it enters cycle condenser by passing through water spray. The process evaporation absorbs latent heat from air, consequently lowering its temperature. drops about 10 degrees Celsius below condenser. improvement increases capacity up 19% boosts 18%. proposed method spraying on inlet improves capacity.

Language: Английский

The Enhancement of Performance Coefficient by Spraying Water on the Condenser of the Compression Cooling Cycle DOI Creative Commons
Maki H. Zaidan,

Aadel A. R. Alkumait,

Ahmed Qays Abdullah

et al.

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Journal Year: 2024, Volume and Issue: 120(1), P. 140 - 150

Published: Aug. 15, 2024

During hot and dry summer months in regions or deserts, compression refrigeration cycles that utilize modern, environmentally friendly refrigerants operate at high gas pressures, particularly when the ambient temperature exceeds 40°C. These systems will consume more energy summer, leading to a lower coefficient of performance (COP) compared cooling do not this type refrigerant gas. In study, both theoretical experimental analyses were undertaken explore an effective solution for enhancing system. This involved reducing air before it enters cycle condenser by passing through water spray. The process evaporation absorbs latent heat from air, consequently lowering its temperature. drops about 10 degrees Celsius below condenser. improvement increases capacity up 19% boosts 18%. proposed method spraying on inlet improves capacity.

Language: Английский

Citations

0