Binary Organic Solar Cells with 19.2% Efficiency Enabled by Solid Additive

Advanced Materials, Journal Year: 2023, Volume and Issue: 35(25)

Published: March 25, 2023

Morphology optimization is critical for achieving high efficiency and stable bulk-heterojunction (BHJ) organic solar cells (OSCs). Herein, the use of 3,5-dichlorobromobenzene (DCBB) with volatility low cost to manipulate evolution BHJ morphology improve operability photostability OSCs proposed. Systematic simulations reveal charge distribution DCBB its non-covalent interaction active layer materials. The addition can effectively tune aggregation PBQx-TF:eC9-2Cl during film formation, resulting in a favorable phase separation reinforced molecular packing. As result, power conversion 19.2% (certified as 19.0% by National Institute Metrology) DCBB-processed PBQx-TF:eC9-2Cl-based OSCs, which highest reported value binary obtained. Importantly, devices exhibit superior have thus considerable application potential printing large-area devices, demonstrating outstanding universality various systems. study provides facile approach control enhances photovoltaic performance OSCs.

Language: Английский

---

Compromising Charge Generation and Recombination of Organic Photovoltaics with Mixed Diluent Strategy for Certified 19.4% Efficiency

Advanced Materials, Journal Year: 2023, Volume and Issue: 35(21)

Published: March 3, 2023

The ternary blend is demonstrated as an effective strategy to promote the device performance of organic photovoltaics (OPVs) due dilution effect. While compromise between charge generation and recombination remains a challenge. Here, mixed diluent for further improving efficiency OPV proposed. Specifically, high-performance system with polymer donor, i.e., PM6, nonfullerene acceptor (NFA), BTP-eC9, diluted by diluents, which involve high bandgap NFA BTP-S17 low BTP-S16 (similar that BTP-eC9). better miscibility BTP-eC9 can dramatically enhance open-circuit voltage (VOC ), while maximizes or short-circuit current density (JSC ). interplay BTP-17 enables recombination, thus leading 19.76% (certified 19.41%), best among single-junction OPVs. Further analysis on carrier dynamics validates efficacy diluents balancing be attributed more diverse energetic landscapes improved morphology. Therefore, this work provides commercialization.

Language: Английский

---

Unidirectional Sidechain Engineering to Construct Dual‐Asymmetric Acceptors for 19.23 % Efficiency Organic Solar Cells with Low Energy Loss and Efficient Charge Transfer

Angewandte Chemie International Edition, Journal Year: 2023, Volume and Issue: 62(36)

Published: July 18, 2023

Achieving both high open-circuit voltage (Voc ) and short-circuit current density (Jsc to boost power-conversion efficiency (PCE) is a major challenge for organic solar cells (OSCs), wherein energy loss (Eloss inefficient charge transfer usually take place. Here, three new Y-series acceptors of mono-asymmetric asy-YC11 dual-asymmetric bi-asy-YC9 bi-asy-YC12 are developed. They share the same asymmetric D1 AD2 (D1 =thieno[3,2-b]thiophene D2 =selenopheno[3,2-b]thiophene) fused-core but have different unidirectional sidechain on side, allowing fine-tuned molecular properties, such as intermolecular interaction, packing pattern, crystallinity. Among binary blends, PM6 : one has better morphology with appropriate phase separation higher order than asy-YC9 bi-asy-YC11 ones. Therefore, bi-asy-YC12-based OSCs offer PCE 17.16 % Voc Jsc , due reduced Eloss efficient properties. Inspired by strong NIR-absorption, introduced into L8-BO construct ternary OSCs. Thanks broadened absorption, optimized morphology, furtherly minimized achieve champion 19.23 %, which highest efficiencies among these annealing-free devices. Our developed engineering constructing bi-asymmetric provides an approach

Language: Английский

---

Tunable Donor Aggregation Dominance in a Ternary Matrix of All‐Polymer Blends with Improved Efficiency and Stability

Advanced Materials, Journal Year: 2023, Volume and Issue: 36(15)

Published: July 7, 2023

Abstract Using two structurally similar polymer acceptors in constructing high‐efficiency ternary all‐polymer solar cells is a widely acknowledged strategy; however, the focus thus far has not been on how acceptor(s) would tune aggregation of donors, and furthermore film morphology device performance (efficiency stability). Herein, it reported that matching celebrity acceptor PY‐IT donor PBQx‐TCl results enhanced H ‐ PBQx‐TCl, which can be finely tuned by controlling amount second PY‐IV. Consequently, efficiency‐optimized PY‐IV weight ratio (0.2/1.2) leads to state‐of‐the‐art power conversion efficiency 18.81%, wherein light‐illuminated operational stability also along with well‐protected thermal stability. Such enhancements stabilities attributed optimization desired glass transition temperature target active layer based comprehensive characterization. In addition being high‐power case for cells, these are successful attempt using combined toward optimal morphology, provides theoretical basis construction other types organic photovoltaics beyond cells.

Language: Английский

---

An Isomeric Solid Additive Enables High‐Efficiency Polymer Solar Cells Developed Using a Benzo‐Difuran‐Based Donor Polymer

Advanced Materials, Journal Year: 2023, Volume and Issue: 35(26)

Published: April 12, 2023

Abstract Currently, nearly all high‐efficiency organic photovoltaic devices use donor polymers based on the benzo‐dithiophene (BDT) unit. To diversify choices of building blocks for high‐performance polymers, benzo‐difuran (BDF) units is explored, which can achieve reduced steric hindrance, stronger molecular packing, and tunable energy levels. In previous research, performance BDF‐based lagged behind those BDT‐based devices. this study, a high efficiency (18.4%) achieved using polymer donor, highest reported BDF materials to date. The enabled by (D18‐Fu) aid solid additive (2‐chloronaphthalene), isomer commonly used 1‐chloronaphthalene. These results revealed significant effect 2‐chloronaphthalene in optimizing morphology enhancing device parameters. This work not only provides new block that an comparable dominant BDT but also proposes replace widely 1‐chloronaphthalene additive.

Language: Английский

---

Green-Solvent Processed Blade-Coating Organic Solar Cells with an Efficiency Approaching 19% Enabled by Alkyl-Tailored Acceptors

Nano-Micro Letters, Journal Year: 2023, Volume and Issue: 15(1)

Published: Nov. 2, 2023

Abstract Power-conversion-efficiencies (PCEs) of organic solar cells (OSCs) in laboratory, normally processed by spin-coating technology with toxic halogenated solvents, have reached over 19%. However, there is usually a marked PCE drop when the blade-coating and/or green-solvents toward large-scale printing are used instead, which hampers practical development OSCs. Here, new series N -alkyl-tailored small molecule acceptors named YR-SeNF same molecular main backbone developed combining selenium-fused central-core and naphthalene-fused end-group. Thanks to -alkyl engineering, NIR-absorbing show different crystallinity, packing patterns, miscibility polymeric donor. The studies exhibit that packing, vertical distribution active layer morphologies well optimized introducing newly designed guest acceptor associated tailored chains, providing improved charge transfer dynamics stability for PM6:L8-BO:YR-SeNF-based As result, record-high approaching 19% achieved OSCs fabricated from green-solvent o -xylene high-boiling point. Notably, ternary offer robust operating under maximum-power-point tracking well-keep > 80% initial PCEs even 400 h. Our alkyl-tailored strategy provides unique approach develop high-efficiency stable OSCs, paves way industrial development.

Language: Английский

---

Step-by-Step Modulation of Crystalline Features and Exciton Kinetics for 19.2% Efficiency Ortho-Xylene Processed Organic Solar Cells

Nano-Micro Letters, Journal Year: 2023, Volume and Issue: 16(1)

Published: Nov. 23, 2023

Abstract With plenty of popular and effective ternary organic solar cells (OSCs) construction strategies proposed applied, its power conversion efficiencies (PCEs) have come to a new level over 19% in single-junction devices. However, previous studies are heavily based chloroform (CF) leaving behind substantial knowledge deficiencies understanding the influence solvent choice when introducing third component. Herein, we present case where newly designed asymmetric small molecular acceptor using fluoro-methoxylated end-group modification strategy, named BTP-BO-3FO with enlarged bandgap, brings different morphological evolution performance improvement effect on host system PM6:BTP-eC9, processed by CF ortho-xylene ( o -XY). detailed analyses supported series experiments, best PCE 19.24% for green solvent-processed OSCs is found be fruit finely tuned crystalline ordering general aggregation motif, which furthermore nourishes favorable charge generation recombination behavior. Likewise, can achieved replacing spin-coating blade coating active layer deposition. This work focuses commonly met yet frequently ignored issues building blends demonstrate cutting-edge device performance, hence, will instructive other OSC works future.

Language: Английский

---

Solid Additive‐Assisted Selective Optimization Strategy for Sequential Deposited Active Layers to Construct 19.16% Efficiency Binary Organic Solar Cells

Advanced Functional Materials, Journal Year: 2023, Volume and Issue: 34(13)

Published: Dec. 21, 2023

Abstract Volatile solid (VS)‐additives are regarded as an effective tool to manipulate morphology of sequential deposited (SD) active layers for improving power conversion efficiencies (PCEs) organic solar cells (OSCs), while the independent effect VS‐additives on donor and acceptor is often overlooked. Herein, a new VS‐additive named 2‐(2‐methoxyphenyl)benzo[ b ]thiophene (BTO) synthesized applied in SD binary PM6/L8‐BO layers. Introducing it into bottom PM6 layer (PM6 + ), BTO has low volatility longer volatilization distance, which prolongs interaction time between L8‐BO /L8‐BO film, leading over‐aggregated L8‐BO. While inserting top (L8‐BO fast evaporation excellent dipole help enhance molecular absorption, crystallinity, ordered packing system. Therefore, optimized with proper phase separation achieved increase exciton dissociation charge transfer properties, restrain recombination energy loss OSCs, yielding impressive PCE over 19%. Furtherly, using D18 instead PM6, SD‐systems offer record‐high 19.16%. The developed selective optimization strategy provides deep insight working mechanism boosting OSCs.

Language: Английский

---

Approaching 19% efficiency and stable binary polymer solar cells enabled by a solidification strategy of solvent additive

Science China Chemistry, Journal Year: 2023, Volume and Issue: 66(5), P. 1500 - 1510

Published: April 18, 2023

Language: Английский

---

Non‐Fully Conjugated Dimerized Giant Acceptors with Different Alkyl‐Linked Sites for Stable and 19.13 % Efficiency Organic Solar Cells

Angewandte Chemie International Edition, Journal Year: 2024, Volume and Issue: 63(14)

Published: Feb. 9, 2024

Abstract Achieving both high power conversion efficiency (PCE) and device stability is a major challenge for the practical development of organic solar cells (OSCs). Herein, three non‐fully conjugated dimerized giant acceptors (named 2Y‐sites, including wing‐site‐linked 2Y‐wing, core‐site‐linked 2Y‐core, end‐site‐linked 2Y‐end) are developed. They share similar monomer precursors but have different alkyl‐linked sites, offering fine‐tuned molecular absorption, packing, glass transition temperature, carrier mobility. Among their binary active layers, D18/2Y‐wing has better miscibility, leading to optimized morphology more efficient charge transfer compared D18/2Y‐core D18/2Y‐end. Therefore, D18/2Y‐wing‐based OSCs achieve superior PCE 17.73 %, attributed enhanced photocurrent fill factor. Furthermore, exhibit balance improved stability, distinguishing them within 2Y‐sites. Building on success 2Y‐wing in systems, we extend its application ternary by pairing it with near‐infrared absorbing D18/BS3TSe‐4F host. Thanks complementary absorption 300–970 nm further morphology, obtain higher 19.13 setting new benchmark dimer‐derived OSCs. This approach site engineering constructing presents promising pathway improve

Language: Английский

---