Stacking Pressure Modulated Deposition and Dissolution of Zinc Anode DOI Open Access
Yuehua Wen, Kesong Yu,

S. Zhan

et al.

Small, Journal Year: 2025, Volume and Issue: unknown

Published: March 11, 2025

Abstract Aqueous zinc‐ion batteries (ZIBs) are emerging as a promising candidate for large‐scale energy storage, offering enhanced safety and low costs. Nevertheless, the disordered growth of zinc dendrites has resulted in coulombic efficiency dangers short circuits, limiting commercialization ZIBs. In this study, planar along (002) direction is achieved by regulating moderate initial stacking pressure during cell cycling facilitating larger deposition particle size. The pivotal role on nucleation, growth, dissolution processes elucidated with situ X‐ray diffraction (XRD), time flight secondary ion mass spectrometry (TOF‐SIMs), scanning electronic microscopy (SEM). By adjusting staking from 20 to 300 kPa, battery cycle increased 5 times. This work highlights opportunity precisely manipulate metal deposition/dissolution long‐cycle life batteries.

Language: Английский

Tough, Anti‐Fatigue, Self‐Adhesive, and Anti‐Freezing Hydrogel Electrolytes for Dendrite‐Free Flexible Zinc Ion Batteries and Strain Sensors DOI
Zong‐Ju Chen, Tianyu Shen,

Min‐Hao Zhang

et al.

Advanced Functional Materials, Journal Year: 2024, Volume and Issue: 34(26)

Published: Feb. 27, 2024

Abstract Quasi‐solid aqueous zinc ion batteries (AZIBs) based on flexible hydrogel electrolytes are promising substitutions of lithium‐ion owing to their intrinsic safety, low cost, eco‐friendliness and wearability. However, it remains a challenge lower the freezing point without sacrificing fundamental advantages such as conductivity mechanical properties. Herein, an all‐around electrolyte is constructed through convenient energy dissipation strategy via rapid reversible intramolecular/intermolecular ligand exchanges between Zn 2+ alterdentate ligands. The as‐obtained exhibits excellent properties, fatigue resistance, high Zn‐ion (38.2 mS cm −1 ), good adhesion (19.1 kPa), ultra‐low (−97 °C). Due ligands help improve solvation structure guide uniform deposition, Zn||Zn symmetric cells show stable plating/stripping behavior long‐term cycle stability. Zn||V 2 O 5 full exhibit large capacity 230.6 mAh g retention 75.2% after 1000 cycles. Furthermore, AZIBs operate stably even under extreme conditions including temperature (−40 °C) bending angle (180°). mechanically damage‐resistant can also be utilized in strain sensors. This work offers facile for developing deformation‐resistant, dendrite‐free, environmentally adaptable AZIBs.

Language: Английский

Citations

54

Hydrogel-stabilized zinc ion batteries: progress and outlook DOI
Le Li,

Shaofeng Jia,

Yue Shi

et al.

Green Chemistry, Journal Year: 2024, Volume and Issue: 26(11), P. 6404 - 6422

Published: Jan. 1, 2024

We explored effective solutions for enhancing the operational stability of ZIBs by designing hydrogel electrolytes that protect zinc anodes, cathodes, and electrolytes.

Language: Английский

Citations

42

Recent advances in zinc-ion dehydration strategies for optimized Zn–metal batteries DOI
Haoyu Li, Sijie Li,

Ruilin Hou

et al.

Chemical Society Reviews, Journal Year: 2024, Volume and Issue: 53(15), P. 7742 - 7783

Published: Jan. 1, 2024

Aqueous Zn-metal batteries have attracted increasing interest for large-scale energy storage owing to their outstanding merits in terms of safety, cost and production. However, they constantly suffer from inadequate density poor cycling stability due the presence zinc ions fully hydrated solvation state. Thus, designing dehydrated structure can effectively address current drawbacks aqueous batteries. In this case, considering lack studies focused on strategies dehydration ions, herein, we present a systematic comprehensive review deepen understanding zinc-ion regulation. Two fundamental design principles component regulation pre-desolvation are summarized environment formation interfacial desolvation behavior. Subsequently, specific strategy based distinct carefully discussed, including preparation methods, working mechanisms, analysis approaches performance improvements. Finally, general summary issues addressed using strategies, four critical aspects promote presented as an outlook, involving updating (de)solvation theories, revealing evolution, enhancing techniques developing functional materials. We believe that will not only stimulate more creativity optimizing electrolytes but also provide valuable insights into other battery systems.

Language: Английский

Citations

39

Improvements and Challenges of Hydrogel Polymer Electrolytes for Advanced Zinc Anodes in Aqueous Zinc-Ion Batteries DOI
Huili Peng, Dongdong Wang, Fenglong Zhang

et al.

ACS Nano, Journal Year: 2024, Volume and Issue: 18(33), P. 21779 - 21803

Published: Aug. 12, 2024

Aqueous zinc-ion batteries (AZIBs) are widely regarded as desirable energy storage devices due to their inherent safety and low cost. Hydrogel polymer electrolytes (HPEs) cross-linked polymers filled with water zinc salts. They not only used in flexible but also represent an ideal electrolyte candidate for addressing the issues associated Zn anode, including dendrite formation side reactions. In HPEs, abundance of hydrophilic groups can form strong hydrogen bonds molecules, reducing activity inhibiting decomposition. At same time, special

Language: Английский

Citations

18

An Ultrahigh‐Modulus Hydrogel Electrolyte for Dendrite‐Free Zinc Ion Batteries DOI Open Access
Zong‐Ju Chen, Tianyu Shen, Xiong Xiao

et al.

Advanced Materials, Journal Year: 2024, Volume and Issue: unknown

Published: Nov. 14, 2024

Abstract Quasi‐solid‐state aqueous zinc ion batteries suffer from anodic dendrite growth during plating/stripping processes, impeding their commercial application. The inhibition of dendrites by high‐modulus electrolytes has been proven to be effective. However, hydrogel are difficult achieve high modulus owing inherent water contents. This work reports a electrolyte with ultrahigh that can overcome the stress through mechanical suppression effect. By combining wet‐annealing, solvent‐exchange, and salting‐out processes tuning hydrophobic crystalline domains, is obtained substantial content (≈70%), (198.5 MPa), toughness (274.3 MJ m −3 ), zinc‐ion conductivity (28.9 mS cm −1 which significantly outperforms previously reported poly(vinyl alcohol)‐based hydrogels. As result, exhibits excellent dendrite‐suppression effect achieves stable performance in Zn||Zn symmetric (1800 h cycle life at 1 mA −2 ). Moreover, Zn||V 2 O 5 pouch display cycling operate stably even under extreme conditions, such as large bending angle (180°) automotive crushing. provides promising approach for designing mechanically reliable advanced batteries.

Language: Английский

Citations

13

Internally connected porous PVA/PAA membrane with cross-aligned nanofiber network for facile and long-lasting ion transport in zinc–air batteries DOI
Kwang Won Kim, Hongdeok Kim, Joonmyung Choi

et al.

Energy storage materials, Journal Year: 2024, Volume and Issue: 71, P. 103594 - 103594

Published: June 24, 2024

Language: Английский

Citations

10

Issues and optimization strategies of binders for aqueous zinc metal batteries DOI
Miao Zhou,

Xiaotao Zhou,

Yu Yang

et al.

Chemical Engineering Journal, Journal Year: 2024, Volume and Issue: 497, P. 154916 - 154916

Published: Aug. 17, 2024

Language: Английский

Citations

10

Material design and mechanism study for zinc ion batteries: Applications of density functional theory calculations and molecular dynamic simulations DOI
Jianghui Cao, Zhao Fang, Xiaoxuan Yang

et al.

Chemical Engineering Journal, Journal Year: 2024, Volume and Issue: 494, P. 153239 - 153239

Published: June 17, 2024

Language: Английский

Citations

9

Calcium Alginate Hydrogel Coating Comprehensively Optimizes Zn Deposition Behavior of Aqueous Zinc-Ion Batteries Anode DOI
Chenguang Liu, Zhuo Li, Bin-bin Sui

et al.

Industrial & Engineering Chemistry Research, Journal Year: 2024, Volume and Issue: 63(31), P. 13611 - 13622

Published: July 29, 2024

Aqueous zinc-ion batteries (AZIBs) with Zn metal as the anode have great potential for large-scale energy storage due to their unique advantages. However, anodes face unfavorable conditions such hydrogen evolution reaction (HER) and dendrite growth, which limit practical application of AZIBs. We constructed a calcium alginate (CA) hydrogel protective layer on foil surface. The carboxyl hydroxyl groups in CA can form bonds H2O inhibit HER. Meanwhile, coating also promotes desolvation process Zn(H2O)62+, results uniform dispersion Zn2+ flux. homogenize electric field distribution surface growth dendrites. Therefore, CA-Zn symmetric be stably cycled 2200 h at 0.5 mA cm–2, showing excellent cycling performance. Overall, introduction effectively optimized faced by anode.

Language: Английский

Citations

8

Achieving Fast Ionic Transport and High Mechanical Properties of Cellulose-Based Solid-State Electrolyte via a Cationic Chain-Extended Effect for Zinc Metal Batteries DOI
Tianyun Zhang, Yu Li, Tian Zhang

et al.

Langmuir, Journal Year: 2025, Volume and Issue: unknown

Published: Feb. 2, 2025

In recent years, rechargeable aqueous zinc metal batteries have ushered in rapid development, but their large-scale industrial application is hindered by anode dendrite formation and hydrogen evolution reaction. Using a solid-state polymer electrolyte one of the strategies to solve this problem. Herein, introducing chain-expanding effect salts on oxidized bacterial cellulose, cellulose-based electrolytes with excellent strength ionic conductivity are prepared. According thermogravimetric calculations, bound water content prepared greatly increases, which slows down occurrence side reactions. More importantly, expanding distance between fiber chains provides more space for movement Zn2+. The obtained displays high (38.26 mS cm-1) good mechanical properties (tensile stress 592 kPa tensile strain 381%). Due solid itself, its electrochemical window expanded 2.58 V. assembled Zn∥Zn symmetrical battery maintains an ultralong cycle lifespan over 980 h 0.5 mA cm-2. Zn∥NH4V10O10 specific capacity (363.1 mAh g-1 at 0.1 A g-1) shows satisfactory rate performance.

Language: Английский

Citations

1