Applied Surface Science, Journal Year: 2024, Volume and Issue: 655, P. 159554 - 159554
Published: Feb. 2, 2024
Language: Английский
ACS Applied Materials & Interfaces, Journal Year: 2023, Volume and Issue: 15(28), P. 34120 - 34131
Published: July 11, 2023
Flexible pressure sensors have attracted significant attention owing to their broad applicability in wearable electronics and human-machine interfaces. However, it is still challenging simultaneously achieve a sensing range high linearity. Here, we present reversed lattice structure (RLS) piezoresistive sensor obtained through layer-level engineered additive infill via conventional fused deposition modeling three-dimensional (3D) printing. The optimized RLS attained (0.03-1630 kPa) with linearity (coefficient of determination, R2 = 0.998) sensitivity (1.26 kPa-1) due the structurally enhanced compressibility spontaneous transition dominant mechanism sensor. It also exhibited great mechanical/electrical durability rapid response/recovery time (170/70 ms). This remarkable performance enables detection various human motions over spectrum, from pulse walking. Finally, electronic glove was developed analyze distribution situations, thereby demonstrating its multipurpose electronics.
Language: Английский
Citations
44
Chemical Engineering Journal, Journal Year: 2024, Volume and Issue: 481, P. 149004 - 149004
Published: Jan. 23, 2024
Language: Английский
Citations
24
Small, Journal Year: 2024, Volume and Issue: 20(46)
Published: Aug. 11, 2024
Abstract Over the past decades, tactile sensing technology has made significant advances in fields of health monitoring and robotics. Compared to conventional sensors, self‐powered sensors do not require an external power source drive, which makes entire system more flexible lightweight. Therefore, they are excellent candidates for mimicking perception functions wearable ideal electronic skin (e‐skin) intelligent robots. Herein, working principles, materials, device fabrication strategies various platforms introduced first. Then their applications robotics presented. Finally, future prospects systems discussed.
Language: Английский
Citations
20
Advanced Materials, Journal Year: 2024, Volume and Issue: unknown
Published: Aug. 11, 2024
Abstract Electronic skins (E‐Skins) are crucial for future robotics and wearable devices to interact with perceive the real world. Prior research faces challenges in achieving comprehensive tactile perception versatile functionality while keeping system simplicity lack of multimodal sensing capability a single sensor. Two kinds sensors, transient voltage artificial neuron (TVAN) sustained potential (SPAN), featuring self‐generated zero‐biased signals developed realize synergistic information (vibration, material, texture, pressure, temperature) device instead complex sensor arrays. Simultaneously, machine learning feature fusion is applied fully decode their output compensate inevitable instability force, speed, etc, applications. Integrating TVAN SPAN, formed E‐Skin achieves holistic touch awareness only unit. It can thoroughly an object through simple without strictly controlled testing conditions, discern surface roughness from 0.8 1600 µm, hardness 6HA 85HD, correctly distinguish 16 objects temperature variance 0 80 °C. The E‐skin also features scalable fabrication process, which be integrated into various broad
Language: Английский
Citations
20
Composites Part A Applied Science and Manufacturing, Journal Year: 2024, Volume and Issue: 181, P. 108163 - 108163
Published: March 20, 2024
Language: Английский
Citations
17
Polymer science & technology., Journal Year: 2025, Volume and Issue: unknown
Published: Feb. 5, 2025
Language: Английский
Citations
4
Advanced Functional Materials, Journal Year: 2023, Volume and Issue: 34(7)
Published: Nov. 3, 2023
Abstract Self‐healing ionic conductive hydrogels have shown significant potential in applications like wearable electronics, soft robotics, and prosthetics because of their high strain sensitivity mechanical electrical recovery after damage. Despite the enormous interest these materials, conventional fabrication techniques hamper use advanced devices since only limited geometries can be obtained, preventing proper conformability to complexity human or robotic bodies. Here, a photocurable hydrogel with excellent deformations based on semi‐interpenetrating polymeric network is reported, which holds remarkable properties (ultimate tensile 550%) spontaneous self‐healing capabilities, complete its damages. Furthermore, developed material processed by digital light processing 3D printing technology fabricate complex‐shaped sensors, increasing stress respect simple sensor geometries, reaching an exceptional pressure detection limit below 1 Pa. Additionally, used as electrolyte laser‐induced graphene‐based supercapacitor, then incorporated into 3D‐printed create self‐powered, fully integrated device. These findings demonstrate that using printing, it possible produce multifunctional, self‐powered appropriately shaped depending various applications, without bulky batteries.
Language: Английский
Citations
39
ACS Applied Materials & Interfaces, Journal Year: 2024, Volume and Issue: 16(19), P. 25422 - 25431
Published: May 2, 2024
Flexible piezoresistive pressure sensors are garnering substantial attention, in line with advancements biointegrated and wearable electronics. However, a significant portion of suffer from the trade-off between sensitivity range. Moreover, current generally rely on rigid metallic electrode, severely deteriorating their long-term durability. Herein, fully flexible sensor coupling polyurethane (PU) based electrode active sensing element is proposed to circumvent aforementioned problems. By rationally regulating double-permeable conductive networks within PU matrix, an elastomeric implemented, respectively. The assembled heterostructured configurations enable impressive up 7.023 kPa–1, broad detection (up 420 kPa), ultralow limit (0.1 Pa), extraordinary operation stability over 80000 cyclic pressings along fast response/relaxation times (60 ms/80 ms). Additionally, capable both real-time physiological signals mimicking keyboards, implying its viability as high-performance sensor.
Language: Английский
Citations
16
European Polymer Journal, Journal Year: 2024, Volume and Issue: 208, P. 112895 - 112895
Published: March 1, 2024
Language: Английский
Citations
15
ACS Applied Nano Materials, Journal Year: 2024, Volume and Issue: 7(13), P. 15626 - 15639
Published: June 28, 2024
The development and utilization of flexible piezoresistive sensors based on bionic nanomaterials have garnered considerable attention due to their broad potential in various domains. However, the key enhanced performance lies incorporating microstructures conductive coatings, which maximize initial resistance minimize upon pressure application, thereby amplifying change signal. In this study, we draw inspiration from microconvex structure observed skin crocodiles propose a bionic-structured sensor. sensor is fabricated using nanocomposites comprising multiwalled carbon nanotubes, silicone rubber, nanofiber conjunction with three-dimensional (3D)-printed structural mold. Sensor similar sandwich three layers: substrate layer, sensing an interdigital electrode layer. Our exhibits improved pressure-sensing capabilities, characterized by rapid response recovery times (25 ms), wide detection range (0–80 kPa), minimal hysteresis (2.44%), high sensitivity (0.4311 kPa–1 within 0–10 kPa range), fine stability (withstanding 6000 cycles under varying pressures). Notably, has efficient ability, long-term stability, good waterproofing properties, expanding its applications human–computer interaction, motion monitoring, intelligent robotics, underwater rescue operations.
Language: Английский
Citations
15