Enhancing Passivation Behaviors and Wear Resistance of Biomedical Ti-15Mo Alloy via {332} Twinning Pre-Tension and Aging DOI Open Access
Shanshan Zhang, Fazhan Yang,

Wei Sun

et al.

Coatings, Journal Year: 2024, Volume and Issue: 14(10), P. 1332 - 1332

Published: Oct. 17, 2024

The purpose of this investigation was to determine the extent which a combination pre-deformation and aging procedures could enhance corrosion wear resistance Ti-15Mo alloy for biomedical materials. initial grains were refined with {332} twins other defects after pre-deformation, increasing amount precipitation nucleation forming finer α phases during aging. precipitates numerous boundaries are beneficial in thicker passivation film phosphate-buffered saline (PBS) solution, 20% pre-deform plus aged is improved by 4.23 times. result indicates that behavior structure significantly influenced its microstructure. worn track debris pre-tension gradually decreases increase rates, caused hardness resistance. mechanism PBS solution revealed, showed processes performed on alloy. This study proposes contributed refinement, would behaviors β titanium

Language: Английский

Unlocking the potential of titanium and its alloys: A mini-review on innovative surface modification techniques DOI Creative Commons
Ishwer Shivakoti, Abhijit Bhowmik,

A. Johnson Santhosh

et al.

AIP Advances, Journal Year: 2024, Volume and Issue: 14(10)

Published: Oct. 1, 2024

Titanium and its alloys are widely utilized in various fields, such as biomedical aerospace, other industrial applications. However, surface modification is essential to further enrich properties enhance effectiveness. Researchers across the globe continuously working on a variety of methods titanium alloys. This paper presents comprehensive review for Some important techniques discussed this includes mechanical, chemical, electrochemical, thermal, physical methods. also provides insights into terms improving corrosion wear resistance, biocompatibility, hardness

Language: Английский

Citations

4
A Study of the Corrosion Behavior of AHSS Complex-Phase CP 780 Employing an Electrochemical Noise Technique Analyzed by Different Methods DOI Creative Commons
María Lara-Banda, Facundo Almeraya-Calderón, Jesús Manuel Jáquez-Muñoz

et al.

Metals, Journal Year: 2025, Volume and Issue: 15(1), P. 59 - 59

Published: Jan. 11, 2025

The automotive industry employs structural steels with E-coats to reduce weight and increase the corrosion resistance of chassis, reducing CO2 emissions. Due their mechanical properties, part chassis is a composite advanced high-strength (AHSS). AHSSs are coated by conversion methods such as phosphate epoxy coating adherence resistance. main point this research characterize an AHSS complex-phase (CP) 780 in blank, E-coat organic using electrochemical noise, employing time-domain, frequency-domain, time–frequency-domain, chaotic system determine type kinetics each system. noise technique was made conventional three-electrode cell, saturated calomel reference electrode. Data were recorded at 1024 s, 1 data per second 3.5 wt. % NaCl electrolyte, according ASTM G199-09. results show how CP presented uniform corrosion, similarly sample; however, trend localized process when analyzed Wavelets transform. On other hand, increased for sample, values 2.58 × 106 Ω·cm2. According research, all samples susceptible present corrosion.

Language: Английский

Citations

0
Improved corrosion resistance and electrical characteristics of titanium, with atomic layer deposited (ALD) TiOx coating DOI Creative Commons
Kesong Wang,

Adam Paxson,

Thomas Valdez

et al.

Applied Surface Science, Journal Year: 2025, Volume and Issue: unknown, P. 162719 - 162719

Published: Feb. 1, 2025

Language: Английский

Citations

0
An In-Depth Review of Corrosion Pathways in Titanium Dental and Orthopedic Implants and Their Biological Interactions DOI
Hala Hrir, Abderrazzak Boudouma, Omar Ait Layachi

et al.

Deleted Journal, Journal Year: 2025, Volume and Issue: unknown

Published: March 4, 2025

Language: Английский

Citations

0
Dissimilar brazing between glass-ceramic and titanium: A new strategy to fabricate one-piece dental implant DOI Creative Commons
Hong Bian,

Xiukai Chen,

Wenjun Yu

et al.

Journal of Materials Research and Technology, Journal Year: 2025, Volume and Issue: unknown

Published: March 1, 2025

Language: Английский

Citations

0
Fabrication and Characterization of Mn-Doped 45S5 Bioglass Coatings for Ti6Al4V Implants DOI Creative Commons
Farhang Abbasi, Mehdi Ahmadian, Akbar Eslami

et al.

Journal of Science Advanced Materials and Devices, Journal Year: 2025, Volume and Issue: unknown, P. 100894 - 100894

Published: April 1, 2025

Language: Английский

Citations

0
Frequency–Time Domain Analysis Based on Electrochemical Noise of Dual-Phase (DP) and Ferrite–Bainite (FB) Steels in Chloride Solutions for Automotive Applications DOI Creative Commons
Facundo Almeraya-Calderón, Marvin Montoya-Rangel, Demetrio Nieves-Mendoza

et al.

Metals, Journal Year: 2024, Volume and Issue: 14(11), P. 1208 - 1208

Published: Oct. 23, 2024

The automotive industry uses high-strength (HS), low-alloy (HSLA) steels and advanced (AHSSs) to manufacture front rear rails safety posts, as well the car body, suspension, chassis components of cars. These can be exposed corrosive environments, such in countries where de-icing salts are used. This research aims characterize corrosion behavior AHSSs based on electrochemical noise (EN) [dual-phase (DP) ferrite–bainite (FB)]. At room temperature, were immersed NaCl, CaCl2, MgCl2 solutions studied by frequency–time domain analysis using wavelet decomposition, Hilbert–Huang analysis, recurrence plots (RPs) related process impedance (Zn). Optical microscopy (OM) was used observe microstructure tested samples. results generally indicated that main is uniform corrosion. a NaCl solution could morphology phase constituents with chlorides. Zn showed DP780 presented higher resistance 918 Ω·cm2; meanwhile, FB780 409 Ω·cm2 when NaCl. Also, mechanism materials begins localized spreading all surfaces, generating after some exposition time.

Language: Английский

Citations

1
Enhancing Passivation Behaviors and Wear Resistance of Biomedical Ti-15Mo Alloy via {332} Twinning Pre-Tension and Aging DOI Open Access
Shanshan Zhang, Fazhan Yang,

Wei Sun

et al.

Coatings, Journal Year: 2024, Volume and Issue: 14(10), P. 1332 - 1332

Published: Oct. 17, 2024

The purpose of this investigation was to determine the extent which a combination pre-deformation and aging procedures could enhance corrosion wear resistance Ti-15Mo alloy for biomedical materials. initial grains were refined with {332} twins other defects after pre-deformation, increasing amount precipitation nucleation forming finer α phases during aging. precipitates numerous boundaries are beneficial in thicker passivation film phosphate-buffered saline (PBS) solution, 20% pre-deform plus aged is improved by 4.23 times. result indicates that behavior structure significantly influenced its microstructure. worn track debris pre-tension gradually decreases increase rates, caused hardness resistance. mechanism PBS solution revealed, showed processes performed on alloy. This study proposes contributed refinement, would behaviors β titanium

Language: Английский

Citations

0